Sony SLV-D970PB / SLV-D970PE / SLV-D970PN / SLV-D970PR / SLV-D975PE / SLV-D980PD / SLV-D980PGI Service Manual ▷ View online
1-23
94
Playing JPEG image files
Playing JPEG image files
You can play JPEG image files on DATA
CDs (CD-ROMs/CD-Rs/CD-RWs) or DATA
DVDs (DVD-ROMs/DVD+RWs/DVD+Rs/
DVD-RWs/DVD-Rs).
CDs (CD-ROMs/CD-Rs/CD-RWs) or DATA
DVDs (DVD-ROMs/DVD+RWs/DVD+Rs/
DVD-RWs/DVD-Rs).
1
Press
Z and place a DATA CD or DATA DVD
on the disc tray, then press
Z to close the tray.
When you load a DATA CD or DATA DVD
which contains MP3 audio tracks and JPEG
image files, “Select a Media Type” menu
appears.
which contains MP3 audio tracks and JPEG
image files, “Select a Media Type” menu
appears.
If you load a DATA CD or DATA DVD which
contains only JPEG image files, the “Album”
display appears. Then you can skip step 2.
contains only JPEG image files, the “Album”
display appears. Then you can skip step 2.
V/v/B/b
ENTER
H
Z
TOP MENU
./>
x
MENU
CLEAR
Select a Media Type
2 JPEG
1 MP3
ENTER
v
V
95
Playing JPEG image files
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
To rotate the selected image
2
Press
V/v to select “JPEG,” then press
ENTER.
The “Album” display will appears.
If you do not press ENTER after selecting a
media type, the selected media will be
automatically played.
media type, the selected media will be
automatically played.
3
Press
./> to select the next/previous album page, then press V/v/
B/b to select an image in the “Album” display.
To display the selected image
1
Press ENTER.
The selected image number appears in the
display window.
The selected image number appears in the
display window.
2
To display the next/previous image, press
./>.
To play the Slide show
1
Press
H.
You can also play the Slide show using the
menu on the selected image.
For details, see “To enjoy the Slide show”
on page 96.
menu on the selected image.
For details, see “To enjoy the Slide show”
on page 96.
2
Press
B/b to select the desired playing
speed on the “Interval” menu, then press
ENTER.
Slide show starts from the selected image.
ENTER.
Slide show starts from the selected image.
1
Press
V/v/B/b to select an image in the “Album”
display, then press ENTER.
2
Press
B/b to select “
,” then press ENTER.
Each time you press ENTER, the image turns
clockwise by 90°.
clockwise by 90°.
ENTER
Album
Photo:
SLIDE SHOW
ENTER
IMAGE
Interval
IMAGE
: Fast
: Normal
: Slow
IMAGE
continued
96
Playing JPEG image files
To zoom in an image
Note
• You cannot use ZOOM on the remote in JPEG image files on DATA CD/DATA DVD.
To enjoy the Slide show
To turn on/off the menu in the single image display
Press CLEAR to turn off the menu. Press
B or b to turn on the menu.
To return to the “Album” display
Press MENU to return to the “Album” display. Press
. repeatedly to return to the
first “Album” page.
To return to the “Select a Media Type” menu
Press
x twice, then press TOP MENU.
Notes
• Slide show can play in only one direction.
• You cannot rotate or zoom in the image during Slide show.
• If you select “
• You cannot rotate or zoom in the image during Slide show.
• If you select “
” in the rotated image display, the images in the “Album” display will not
be rotated. But if you start the slide show, the images will be rotated. Correct the rotation in
the “
the “
” menu.
1
Press
V/v/B/b to select an image in the “Album”
display, then press ENTER.
2
Press
B/b to select “ ,” then press ENTER.
“
” appears.
3
Press
V/v/B/b to move “ ” to the position where
you want to zoom in.
4
Press ENTER repeatedly to change the
magnification. Each time you press ENTER, the
magnification changes as shown below.
magnification. Each time you press ENTER, the
magnification changes as shown below.
2
×
t normal magnification
1
Press
V/v/B/b to select an image in the “Album”
display, then press ENTER.
2
Press
B/b to select “
,” then press ENTER.
The “Interval” menu appears.
3
Press
B/b to select the desired playing speed, then
press ENTER.
Slide show starts.
IMAGE
Interval
97
Playing JPEG image files
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
About JPEG image files
You can play back DATA CDs (CD-ROMs/CD-Rs/CD-RWs) or DATA DVDs (DVD-
ROMs/DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs) recorded in JPEG format.
However, the discs must be recorded according to ISO9660 Level 1/Level 2 or Joliet
format and DATA DVDs of Universal Disk Format (UDF) for the player to recognize
the tracks (or files). You can also play DATA CDs or DATA DVDs recorded in Multi
Session or Multi Border (see “Note on Multi Session/Border discs” on page 97).
Refer to the instructions supplied with the CD-R/CD-RW/DVD-R/DVD-RW drives
and the recording software (not supplied) for details on the recording format.
ROMs/DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs) recorded in JPEG format.
However, the discs must be recorded according to ISO9660 Level 1/Level 2 or Joliet
format and DATA DVDs of Universal Disk Format (UDF) for the player to recognize
the tracks (or files). You can also play DATA CDs or DATA DVDs recorded in Multi
Session or Multi Border (see “Note on Multi Session/Border discs” on page 97).
Refer to the instructions supplied with the CD-R/CD-RW/DVD-R/DVD-RW drives
and the recording software (not supplied) for details on the recording format.
Notes
• If both video data and JPEG image files exist on a DATA DVD, the player recognizes only
the video data.
• A total of up to 999 files can be recognized for discs that contain both MP3 and JPEG files.
Files are recognized in the order that they were recorded. For example, if 990 JPEG files are
recorded then 100 MP3 files are recorded, the 990 JPEG files recorded first and only the first
9 MP3 files can be recognized.
recorded then 100 MP3 files are recorded, the 990 JPEG files recorded first and only the first
9 MP3 files can be recognized.
Note on Multi Session/Border discs
If JPEG image files are recorded in the first session/border, the player will also play
JPEG image files in other session/border. If audio tracks and images in Music CD
format or Video CD format are recorded in the first session/border, only the first
session/border will be played back.
JPEG image files in other session/border. If audio tracks and images in Music CD
format or Video CD format are recorded in the first session/border, only the first
session/border will be played back.
Tip
• If you add numbers (01, 02, 03, etc.) to the front of the file names, the files will be played in
that order.
Notes
• This player can play JPEG image files with the extension “.JPEG” or “.JPG.”
• Some DATA-CDs or DATA DVDs cannot be played on this system depending on file format.
• The player may not be able to play some DATA CDs/DATA DVDs created in the Packet
• Some DATA-CDs or DATA DVDs cannot be played on this system depending on file format.
• The player may not be able to play some DATA CDs/DATA DVDs created in the Packet
Write format.
• If you add the extension “.JPG” or “.JPEG” to data not in JPEG format, “Can not Display”
will appear.
• Depending on the disc or the size of image files, playback may take some time to start.
• Progressive and lossless compression JPEG image files are not supported.
• The image size that can be displayed is limited. You can display the following images;
• Progressive and lossless compression JPEG image files are not supported.
• The image size that can be displayed is limited. You can display the following images;
width 32 - 7680 pixels by height 32 - 8192 pixels.
1-24
98
Playing VIDEO CDs with “PBC On/Off” functions
Playing VIDEO CDs with “PBC On/Off”
functions
functions
The PBC (Playback control) function allows
you to search and perform other operations
interactively. PBC playback follows a
selection menu displayed on your TV screen.
you to search and perform other operations
interactively. PBC playback follows a
selection menu displayed on your TV screen.
1
Press MENU to select “PBC On.”
The menu for your selection appears.
2
Press
V/v to select the item number you want.
You can also use the number buttons to select the item number and track.
V/v
ENTER
Number
buttons
buttons
O
RETURN
MENU
H
MENU
ENTER
1
2
3
4
5
6
7
8
9
0
99
Playing VIDEO CDs with “PBC On/Off” functions
DV
D Ad
D Ad
diti
onal
O
p
p
eratio
ns
To return to the menu
Press
O RETURN.
To play using “PBC Off”
Press MENU to select “PBC Off.”
When “PBC Off” is selected, the DVD player starts continuous play. You cannot
play still pictures such as a menu.
To return to “PBC On,” press MENU to select “PBC On.”
When “PBC Off” is selected, the DVD player starts continuous play. You cannot
play still pictures such as a menu.
To return to “PBC On,” press MENU to select “PBC On.”
Tip
• Depending on the VIDEO CD, “Press ENTER” in step 3 may appear as “Press SELECT” in
the instructions supplied with the disc. In this case, press
H.
3
Press ENTER.
4
Follow the instructions in the menu for interactive operations.
Refer to the instructions supplied with the disc, as the operating procedure
may differ depending on the VIDEO CD.
may differ depending on the VIDEO CD.
ENTER
100
Quick Timer Recording
VCR Additional Operations
Quick Timer Recording
After you have started recording, you can
have the VCR stop recording automatically
after a specified duration.
have the VCR stop recording automatically
after a specified duration.
1
While recording, press
z REC.
2
Press
z REC repeatedly to set the duration time.
In SP mode
Each press advances the time in increments of 30 minutes.
In LP mode
Each press advances the time as shown below.
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording.
recording.
z
REC
x
REC
REC
0:30
1:00
4:00
4:30
Normal recording
0:30
8:00
9:00
1:00
Normal recording
101
Quick Timer Recording
VCR Ad
ditio
nal Ope
ration
s
To extend the duration
Press
z REC repeatedly to set a new duration time.
To cancel the duration
Press
z REC repeatedly until the indicator disappears and the VCR returns to
normal recording mode.
To stop while recording
Press
x.
Notes
• You cannot display the current tape time in the display window when setting the recording
duration time.
• During DVD playback, DVD-VCR does not standby even if the VCR stops recording.
1-25
102
Recording stereo and bilingual programmes
Recording stereo and bilingual
programmes
programmes
In the ZWEITON (German stereo) system
This VCR automatically receives and records stereo and bilingual programmes based
on the ZWEITON system. When a stereo or bilingual programme is received, the
STEREO indicator appears in the display window.
on the ZWEITON system. When a stereo or bilingual programme is received, the
STEREO indicator appears in the display window.
To select bilingual sound while recording
Press AUDIO to select the sound you want.
* Usually the main channel heard from both the left and right in bilingual programmes
To select stereo programme while recording
* Usually the mixed sound of left and right channels in stereo programmes
In the NICAM* system
This VCR receives and records stereo and bilingual programmes based on the
NICAM system (NICAM appears on the TV screen). When a stereo or bilingual
programme is received, the STEREO indicator appears in the display window.
NICAM system (NICAM appears on the TV screen). When a stereo or bilingual
programme is received, the STEREO indicator appears in the display window.
To record a NICAM programme, “NICAM” in the “USER SET” menu should be set
to “On” (initial setting). To check the menu setting, see page 114 for details.
to “On” (initial setting). To check the menu setting, see page 114 for details.
* not available on SLV-D980P D
To listen to
On-screen display
Display window
Main
MAIN
STEREO
Sub
SUB
STEREO
Main and sub
MAIN/SUB
STEREO
Standard sound*
MONO
STEREO
To listen to
On-screen display
Display window
Stereo
STEREO
STEREO
Left channel
LCH
STEREO
Right channel
RCH
STEREO
Standard sound*
LCH + RCH
STEREO
103
Recording stereo and bilingual programmes
VCR Ad
ditio
nal Ope
ration
s
To select the sound while recording
Press AUDIO to select the sound you want.
* Usually the mixed sound of left and right channels
* Usually the main sound (monaural)
Selecting the sound during Hi-Fi playback
Press AUDIO to select the sound you want.
* The mixed sound of left and right channels, and the normal mono audio track
Stereo programmes
To listen to
On-screen display
Display window
Stereo
NICAM, STEREO
STEREO
Left channel
NICAM, LCH
STEREO
Right channel
NICAM, RCH
STEREO
Left and right channels*
NICAM, LCH + RCH
STEREO
Bilingual programmes
To listen to
On-screen display
Display window
Main
NICAM, MAIN
STEREO
Sub
NICAM, SUB
STEREO
Main and sub
NICAM, MAIN/SUB
STEREO
Standard sound*
NICAM, MONO
STEREO
To listen to
On-screen display
Display window
Stereo
STEREO
STEREO
Left channel
LCH
STEREO
Right channel
RCH
STEREO
Mix sound*
MIX
STEREO
Mono sound
MONO
No indicator
continued
104
Recording stereo and bilingual programmes
How sound is recorded on a video tape
The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the
main track along with the picture. Monaural sound is recorded onto the normal audio
track along the edge of the tape.
main track along with the picture. Monaural sound is recorded onto the normal audio
track along the edge of the tape.
Notes
• To listen to playback sounds in stereo, you must use the Scart or AUDIO OUT connections.
• When you play a tape recorded in monaural, the sound is heard in monaural regardless of the
• When you play a tape recorded in monaural, the sound is heard in monaural regardless of the
AUDIO setting.
Stereo
Usually mixed
left/right channels
left/right channels
Bilingual
Usually main sound
Normal audio track
(monaural)
(monaural)
Hi-fi audio track
(main track)
(main track)
Stereo sound
(left/right channels)
(left/right channels)
Main (left channel)
Sub (right channel)
Sub (right channel)
105
Searching using index function
VCR Ad
ditio
nal Ope
ration
s
Searching using index function
To find a specific recording by scanning (Index scan)
The VCR automatically marks the tape with
an index signal at the point where each
recording begins. Use these signals as
references to find a specific recording.
an index signal at the point where each
recording begins. Use these signals as
references to find a specific recording.
1
Insert an indexed tape into the tape compartment.
2
Press INDEX, then press
m/M. The
VCR starts scanning each recording for five
seconds in the corresponding direction.
seconds in the corresponding direction.
3
Press
H to start playback when you find the desired point.
INDEX
H
m/M
x
REPEAT/
INDEX
INDEX SCAN
B B
:
continued
1-26
106
Searching using index function
To search a specific recording (Index search)
To stop searching
Press
x.
Note
• No index signal will be added when recording starts from recording pause. However, an
index signal will be marked if you change the programme position during recording pause.
1
Insert an indexed tape into the VCR.
2
Press INDEX, then press
m/M twice.
• To search ahead, press
M twice.
• To search backwards, press
m twice.
3
Press
m/M depending on the direction where your desired programme
is located.
Each time you press the button, the number increases or decreases up to
±20, respectively.
±20, respectively.
4
The VCR starts searching, and playback starts automatically from that
point.
point.
REPEAT/
INDEX
INDEX SEARCH
+01
B B
:
107
Adjusting the picture (tracking)
VCR Ad
ditio
nal Ope
ration
s
Adjusting the picture
(tracking)
Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape, distortion may
occur if the recording is in poor condition. In
this case, manually adjust the tracking.
tracking when playing a tape, distortion may
occur if the recording is in poor condition. In
this case, manually adjust the tracking.
During playback, press TRACKING +/– to
display the tracking meter. The distortion
should disappear as you press one of the two
buttons. To resume automatic tracking
adjustments, eject the tape and re-insert it.
display the tracking meter. The distortion
should disappear as you press one of the two
buttons. To resume automatic tracking
adjustments, eject the tape and re-insert it.
Adjusting the picture
sharpness (Smart trilogic)
sharpness (Smart trilogic)
You can automatically adjust the sharpness of
the picture.
the picture.
1
During playback, press SET UP, then press
V/v to select
V/v to select
(OPTION) and press
ENTER.
T R A C K I N G – – – – – –
– – – – – –
Tracking meter
V/v/B/b
ENTER
SET UP
O
RETURN
SET UP
ENTER
Language
Install
Auto Power Off
Screen Messages
Power Save
Screen Messages
Power Save
User Set
Clock
:English
[ Off ]
[ Off ]
[ On ]
RETURN
OPTION
SET UP
ENTER
v
V
continued
108
Adjusting the picture (tracking)
2
Press
V/v to select “User Set,” then press
ENTER.
3
Press
V/v to select “Smart Trilogic,” then
press
b.
4
Press
V/v to set “SMART TRILOGIC” to
“ON” or “OFF.”
• ON: Picture sharpness is automatically
adjusted.
• OFF: Adjust the picture sharpness
manually.
To soften the picture, press
B.
To sharpen the picture, press
b.
5
Press
O RETURN to return to the original screen.
ENTER
NICAM
Colour System
ShowView Extend
Smart Trilogic
[ Off ]
RETURN
USER SET
SET UP
v
V
b
B
[ On ]
[ On ]
[ Auto ]
ENTER
NICAM
Colour System
ShowView Extend
Smart Trilogic
RETURN
USER SET
SET UP
v
V
b
B
[ Off ]
[ On ]
[ On ]
[ Auto ]
ENTER
SHARPEN
SOFTEN
– – – – – – – – – – –
– – – – – – – – – – –
*
– – – – – – – –
PICTURE
SMART TRILOGIC : ON
ON / OFF :
V
v
B
b
RETURN
RETURN
109
Changing menu options
VCR Ad
ditio
nal Ope
ration
s
Changing menu options
1
Press SET UP when the DVD player is in stop
mode, then press
mode, then press
V/v to select
(OPTION) or
(VIDEO) and press
ENTER.
2
Press
V/v to select the option to change.
V/v/B/b
ENTER
SET UP
SET UP
ENTER
Language
Install
Auto Power Off
Screen Messages
Power Save
Screen Messages
Power Save
User Set
Clock
:English
[ Off ]
[ Off ]
[ On ]
RETURN
OPTION
SET UP
ENTER
v
V
Tape Select
Repeat Play
Repeat Play
RETURN
VIDEO SETUP
SET UP
v
V
b
B
[ E180 ]
[ Off ]
[ Off ]
ENTER
Tape Select
Repeat Play
Repeat Play
RETURN
VIDEO SETUP
SET UP
v
V
b
B
[ E180 ]
[ Off ]
[ Off ]
continued
Click on the first or last page to see other SLV-D970PB / SLV-D970PE / SLV-D970PN / SLV-D970PR / SLV-D975PE / SLV-D980PD / SLV-D980PGI service manuals if exist.