DOWNLOAD Sony SLV-D940PAZ / SLV-D940PEA / SLV-D940PME Service Manual ↓ Size: 12.55 MB | Pages: 122 in PDF or view online for FREE

2-9

2

CONNECTOR WAFER

1

CABLE FLAT

3

CONNECTOR WAFER

1) Remove the Gear Worm wheel 1.

Fig. 2-16 Gear Worm Wheel Removal

1) Remove the Drum connecting part of Cable Flat 1 from Connector

Wafer 2.

2) Remove the Loading Motor connecting part of Cable Flat 1 from

Connector Wafer 3.

Fig. 2-17 Cable Flat Removal

1

GEAR WORM WHEEL

2-10

1

SCREW

2

BRAKET GEAR

4

GEAR JOINT 1

3

GEAR JOINT 2

2

MOTOR LOADING ASS`Y

1

SCREW

1) Remove the Screw 1.
2) Remove the Motor Loading Ass’y 2.

Fig.2-18 Motor Loading Ass’y Removal

1) Remove the Screw 1.
2) Remove the Bracket Gear 2.
3) Remove the Gear Joint 2 3.
4) Remove the Gear Joint 1 4.

1) Be sure to align dot mark of Gear Joint 1 1 with dot mark of

Gear Joint 2 2 as shown Fig 2-20.
(Refer to Timing point1)

2) Confirm the Timing Point 2 of the Gear Joint 2 2  and Slider

Cam 3.

Fig. 2-19 Bracket Gear, Gear Joint 1,2 Removal

Fig. 2-20 Gear Joint 1,2 Assembly

1

GEAR JOINT1

2

GEAR JOINT2

3

SLIDER CAM

TIMING POINT 1

TIMING POINT 2

2-11

1) Remove the Belt Pulley. (Refer to Fig. 2-38)
2) Remove the Gear Loading Drive 1 after releasing Hook [A] in

the direction arrow as shown in detail drawing.

3) Remove the Slider Cam 2.
4) Remove the Lever Load S 3, Link Load S 5 & Lever Load T 4,

Link Load T 6.

Fig. 2-21 Gear Loading Drive, Slider Cam,

Lever Load S, T Ass’y Removal

1) When reinstalling, be sure to align dot of Lever T Load Ass’y 1

with dot of Lever S Load Ass’y 2 as shown in drawing, (Refer to
Timing Point 1).

2) Insert the Pin A,B,C,D into the Slider Cam 3 hole.
3) Be sure to align dot of Lever T Load 1 and dot of Gear Loading

Drive 4, (Refer to Timing Point 2).

4) Aline dot of Gear Loading drive 4 with mark of Slider Cam 3 as

shown in drawing (Refer to Timing Point 3).

Fig. 2-22 Gear Loading Drive, Slider Cam,

Lever Load S, T Ass’y Assembly

1

GEAR LOADING DRIVE

3

LEVER LOAD S

4

LEVER LOAD T

2

SLIDE CAM

HOOK(A)

5

 LINK LOAD S

6

 LINK LOAD T

2

LEVER S LOAD ASS'Y

1

LEVER T  LOAD ASS'Y

TIMING POINT 1

2

 LEVER S LOAD S ASS'Y 

1

 LEVER T LOAD ASS'Y

PIN A

PIN C

PIN B

PIN D

3

 SLIDER CAM

TIMING POINT 2

TIMING POINT 3

4

 GEAR LOADING DRIVE

2-12

1

SPRING TENTION LEVER

2

LEVER TENTION A

3

BAND BRAKE ASS

STOPPER

MARK[B]

"A"

1) Remove the Lever Pinch Drive 1, Lever Tension Drive 2.

Fig. 2-23 Lever Pinch Drive,

Lever Tension Drive Removal

1) Remove the Lever Brake S Ass’y (Refer to Fig 2-25).
2) Remove the Spring Tension Lever 1.
3) Rotate stopper of Main Base in the direction of arrow “A”.
4) Lift the Lever Tension Ass’y 2 & Band Brake Ass’y 3.

1) When replacing the Lever Tension Ass’y 2, be sure to apply Grease

on the post.

2) Take care not to touch stain on the felt side, and not to be folder

and broken Band Brake Ass’y

3) After Lever Tension Ass’y seated, Rotate stopper of Main Base to

the Mark[B].

Fig. 2-24 Lever Tension Ass’y,

Band Brake Ass’y Removal

1

LEVER PINCH DRIVE 

2

LEVER TENSION DRIVE