DOWNLOAD Sony SLV-D500P (serv.man2) Service Manual ↓ Size: 14.16 MB | Pages: 125 in PDF or view online for FREE

2-7

"B"

"A"

1

LEVER FL DOOR

2

HOOK

1) Pull the Holder FL Cassette Ass’y 1 to the eject position.
2) Pull the Holder FL Cassette Ass’y 1 as grasping the Holder FL

Cassette Ass’y 1 and Lever FL Cassette-R 2 in the same time to
release hooking from Main Base until the Boss [A] of Holder FL
Cassette Ass’y 1 is taken out from the Rail [B].

3) Lift the Holder FL Cassette Ass’y 1, in this time, you have to

grasp the Lever FL Cassette-R 2 Continuously until the Holder
FL Cassette Ass’y 1 is taken out completely.

 Be sure to insert Lever FL Cassette-R 2 in the direction of

“A” to prevent separation and breakage of the Lever FL Cassette-
R 2 at disassembling and reassembling.

Fig. 2-11 Holder FL Cassette Ass’y Removal

1) Release the Hook 2 and Remove the Lever FL Door 1 in the

direction of arrow “A”.

Fig. 2-12 Lever FL Door Removal

1

HOLDER FL 
CASSETTEE ASS'Y

BOSS [A]

RAIL [B]

2

LEVER FL CASSETTEE -R

"A"

2-8

1

SLIDER FL DRIVE

2

GEAR FL CAM

1) Pull the Slider FL Drive 1 to the front direction.
2) Remove the Slider FL Drive 1 in the direction of arrow. (Refer to

Fig. 2-13)

3) Remove the Gear FL cam 2.

 When reinstalling be sure to reassemble Slider FL drive 1

after you insert the Boss of Lever FL ARM-R in Groove of Slider FL
drive 1.

 Align the Gear FL Cam 1 with the Gear worm wheel

Post as shown drawing.
(Refer to Timing point)

Fig. 2-13 Slider FL Drive Removal

Fig. 2-14 Gear FL Cam, Gear Worm

1) Push the hole “A” in the direction of arrow “B” use the pin.(about

Dia. 2.5)

2) Pull out the Lever FL Arm Ass’y 1 from  the Boss of Main Base.
3) Remove the Lever FL Arm Ass’y 1 in the direction of arrow “C”.

Fig. 2-15 Lever FL Arm Ass’y Removal

1

GEAR FL CAM

GEAR WORM WHEEL

POST

TIMING POINT

1

LEVER FL ARM ASS'Y

"C"

"B"

PIN

HOLE "A"

2-9

3

CONNECTOR WAFER

2

CONNECTOR WAFER

1

CABLE FLAT

1

GEAR WORM WHEEL

1) Remove the Gear Worm wheel 1.

Fig. 2-16 Gear Worm Wheel Removal

1) Remove the Drum connecting part of Cable Flat 1 from Connector

Waffer 2.

2) Remove the Loading Motor connecting part of Cable Flat 1 from

Connector Waffer 3.

Fig. 2-17 Cable Flat Removal

2-10

1

GEAR JOINT1

2

GEAR JOINT2

3

SLIDER CAM

TIMING POINT 1

TIMING POINT 2

2

MOTOR LOADING ASS`Y

1

SCREW

1

SCREW

2

BRAKET GEAR

4

GEAR JOINT 1

3

GEAR JOINT 2

1) Remove the screw 1.
2) Remove the Motor Loading Ass’y 2.

Fig.2-18 Motor Loading Ass’y Removal

1) Remove the SCREW 1.
2) Remove the Bracket Gear 2.
3) Remove the Gear Joint 2 3.
4) Remove the Gear Joint 1 4.

1) Be sure to align dot mark of Gear Joint 1 1 with dot mark of

Gear Joint 2 2 as shown Fig 2-20.
(Refer to Timing point1)

2) Confirm the Timing Point 2 of the Gear Joint 2 2  and Slider

Cam 3.

Fig. 2-19 Bracket Gear, Gear Joint 1,2 Removal

Fig. 2-20 Gear Joint 1,2 Assembly