Sony XBR-85X950B Service Manual ▷ View online
XBR-85X950B 17
SECTION 3 - REPAIR INFORMATION
19. Press
to display the
Serial Number input screen.
DIGITAL (MODEL)
SERVICE
SerialNumberEdit
*1 SerialNumber
Please Input serial number
(0000000-99999999)
_ _ _ _ _ _ _
CAUTION: The Serial Number can only be selected once. Be sure
to verify the information is correct before saving the changes.
to verify the information is correct before saving the changes.
20. Enter the Serial Number of the TV.
NOTE:
If the incorrect Serial Number is entered, press
RETURN
to go back to the Serial Number input screen and re-enter
the correct number.
the correct number.
21. Press
to save the Serial Number.
DIGITAL (MODEL)
SERVICE
SerialNumberEdit
*1 SerialNumber
1800001
1800001
WRITE
22. Press
1
until option
005 VAR_TYPE displays.
DIGITAL
SERVICE
002 MODEL
005 VAR_TYPE
23. Press
3
until option
UC displays.
DIGITAL
SERVICE
002 MODEL
005 VAR_TYPE
UC
24. Press
MUTE
then
0
to save the changes.
DIGITAL
SERVICE
002 MODEL
005 VAR_TYPE
UC
WRITE
XBR-85X950B 18
SECTION 3 - REPAIR INFORMATION
12. Clear the
Self Check screen.
a. Press Power
I/0
to exit
Service Mode.
b. Press the following buttons on the
Remote Commander within
1 second of each other:
DISPLAY
Channel
5
Volume
-
Power
I/0
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
120123132522 120123113645 --------------------- 02
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- -------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 06789
Error Count
c. To clear the error history and error count press
8
0
.
d. Press Power
I/0
to exit the
Self Check screen.
13. Cycle AC Power (Unplug and plug AC Cord from the outlet).
REPLACING THE POWER SUPPLY BOARDS
1. Locate G3 Power Supply Board, disconnect all connectors, then remove
5 screws and lift as shown to detach.
G3 Board
G3 Board
2. Remove screws and connectors from G5 Power Supply Board, then lift
as shown to detach from TV.
G5 Board
G5 Board
3. Locate the Sheet Insulation G35 and lift as shown to detach.
Sheet, Insulation
G35
Sheet, Insulation
G35
4. Locate and remove 5 screws and allconnectors from G6 Power Supply
Board, then lift as shown to detach from TV.
G6 Board
G6 Board
XBR-85X950B 19
SECTION 3 - REPAIR INFORMATION
5. Locate the Sheet Insulation G6 and lift as shown to detach.
Sheet, insulation G6
Sheet, Insulation G6
6. Install the new Power Supply Boards, Sheet Insulation, screws and
connectors.
7. Update the Software.
After ALL repairs UPDATE the SOFTWARE to the latest version.
Instructions are included with the Software package on the
Instructions are included with the Software package on the
Sony
Authorized Service Portal
website.
a. Insert the USB device with the latest Software into the TV.
b. Press
POWER
to turn on the TV.
c. Wait until the Software update is complete and the TV turns OFF.
REPLACING THE SWITCH UNIT
1. Release the clips and lift the Switch Unit to detach, then disconnect its
connector.
2. Remove 1 screw from Holder, Side SW and lift as shown to detach.
3. Install the new Switch Unit and the connector.
REMOVING THE USB ASSEMBLY
1. Locate the USB Assembly, release the clip and lift as shown to detach.
USB, Assembly
USB, Assembly
2. Release the USB connector from the Bracket, Top.
Then lift USB Holder to detach from Cable with Connector (USB)
as shown.
as shown.
USB Holder
USB Holder
Cable with
Connector
(USB)
Cable with
Connector
(USB)
XBR-85X950B 20
SECTION 3 - REPAIR INFORMATION
3. Locate the Base, Bracket Top, remove 2 screws and lift as shown
to detach.
Base,
Bracket Top
Base,
Bracket Top
REMOVING THE SPEAKERS
1. Locate and remove screws and all connectors from SWF Speaker Box
Left and Right.
SWF Speaker
Box Left
SWF Speaker
Box Left
SWF Speaker
Box Right
SWF Speaker
Box Right
2. Lift SWF Speaker Box Left and Right as shown to detach.
SWF Speaker
Box Left
SWF Speaker
Box Left
SWF Speaker
Box Right
SWF Speaker
Box Right
3. Disconnect the Speaker Box, Left connector and lift to detach.
Speaker Box, Left
Speaker Box, Left
4. Disconnect the Speaker Box, Right connector and lift to detach.
Speaker Box, Right
Speaker Box, Right
REMOVING THE SMART CORE BLOCK
1. Remove 1 screw from the Bracket, SC Left and slide it left to detach.
2. Remove 1 screw from the Bracket, SC Right and slide it right to detach.
Click on the first or last page to see other XBR-85X950B service manuals if exist.