Sony XBR-85X950B Service Manual ▷ View online
XBR-85X950B 13
SECTION 3 - REPAIR INFORMATION
REPAIRING THE TV
If the latest Software does not correct the issue, complete the following:
1. Verify the television has the symptom the customer indicated.
2. Replace part causing the symptom.
3. Install the latest version of Software (Required for ALL repairs).
4. Perform the required service adjustments and checks.
5. Verify the repair resolved the issue.
REMOVING THE CAMERA MODULE AND TABLE-TOP
STAND LEFT AND RIGHT
1.
Place TV in a standing position on a flat surface. Then locate and
remove 1 screw from the Camera Module to lift as shown and detach
from TV.
remove 1 screw from the Camera Module to lift as shown and detach
from TV.
2.
Place TV face down on a flat and soft surface to locate Stand Right and
Left.
Left.
3. Locate and remove the screws as shown to detach the Right and
Left Stand.
REMOVING THE REAR COVER
1. Locate the Cover, Terminal Side and lift as shown to detach.
Cover,
Terminal
Side
Cover,
Terminal
Side
2. Locate the Cover, Terminal Rear and lift as shown to detach.
Cover,
Terminal
Rear
Cover,
Terminal
Rear
3. Locate and remove all screws from the Rear Cover.
XBR-85X950B 14
SECTION 3 - REPAIR INFORMATION
8. Remove 1 screw from the AC, Inlet Assembly to detach as shown.
AC, Inlet Assembly
AC, Inlet Assembly
CAUTION: Do not hit or press the clips located on the Back Chassis
while installing and/or replacing new parts. Pressure on the clips may
detach them from the Back Chassis.
Please refer to the illustration below for clip location.
detach them from the Back Chassis.
Please refer to the illustration below for clip location.
Clip
Covered Clip
Covered Clip
9. Remove 2 screws from the Bracket, AC Inlet to detach the AC Inlet.
Bracket, AC Inlet
Bracket, AC Inlet
AC, Inlet
AC, Inlet
4. Release all clips and remove screws from the Rear Cover, Left to lift as
shown and detach.
Rear Cover, Left
Rear Cover, Left
5. Release all clips and remove screws from the Rear Cover, Right to lift as
shown and detach.
Rear Cover, Right
Rear Cover, Right
6. Remove screws from the Rear Cover, Center to lift as shown
and detach.
Rear Cover,
Center
Rear Cover,
Center
7. Release all clips and remove screws from the Rear Cover, Bottom to lift
as shown and detach.
Rear Cover, Bottom
Rear Cover, Bottom
XBR-85X950B 15
SECTION 3 - REPAIR INFORMATION
REPLACING THE MAIN BOARD AND TUNER BOARD
The Main Board and Tuner Board used in this model are available for
repair. For Part Number information refer to
repair. For Part Number information refer to
Section 4 - Exploded View/Part
Number Information on page 22.
1. Slide the Side Bracket as shown to detach from the Main Board.
Side
Bracket
Side
Bracket
2. Locate and disconnect all connectors. Then remove all screws from
the Main Board Plate to detach.
3. Locate the K0 Board and remove 4 screws, then lift as shown to detach.
K0 Board
K0 Board
4. Locate and remove 4 screws from the Tuner Board, release the clip and
lift as shown to detach.
Tuner Board
Tuner Board
5. Locate and remove all screws from the Main Board, then lift as shown
to detach.
Main Board
Main Board
6. Install the new Main Board, K0 Board and/or Tuner Board, screws and
all connectors.
7. Update the Software.
After ALL repairs UPDATE the SOFTWARE to the latest version.
Instructions are included with the Software package on the
Instructions are included with the Software package on the
Sony
Authorized Service Portal
website.
a. Insert the USB device with the latest Software into one of the TVs’
USB ports.
b. Connect TV to AC power.
c. Wait at least 20 seconds.
d. Press Power
I/0
on the TV to turn it ON.
e. Wait until the Software update is completed.
8. To access
Service Mode, turn TV ON and OFF again then press
the following buttons within 1 second of each other:
DISPLAY
Channel
5
Volume
+
Power
I/0
9. When the
DIGITAL Menu appears, press
2
until
002 MODEL category
displays.
XBR-85X950B 16
SECTION 3 - REPAIR INFORMATION
10. Press
1
until
001 DEST item displays.
DIGITAL
SERVICE
002 MODEL
001 DEST
001 DEST
ATSC_UC_BASE
CAUTION: If the incorrect Destination Data Value is selected, it may
corrupt the Sofware requiring a Main Board replacement.
corrupt the Sofware requiring a Main Board replacement.
11. Select the correct destination of the TV, press
3
to increase or
6
to decrease the data value (Use the table below for reference).
Model Name
Destination
Data Value
XBR-85X950B
US/CND
ATSC_UC_BASE
ATSC-LTN_BASE
ATSC-LTN_BASE
XBR-85X950B
LA/MX
12. Press
MUTING
then
0
to save the changes.
DIGITAL
SERVICE
002 MODEL
001 DEST
WRITE
ATSC_UC_BASE
13. Press
1
until
002 MODELNAME displays.
DIGITAL
SERVICE
002 MODEL
002 MODELNAME
_________
14. Press
3
until the model displayed matches the model of the TV.
CAUTION: The Model Name can only be selected once. Be sure
to verify the information is correct before saving the changes.
to verify the information is correct before saving the changes.
15. Press
MUTING
then
0
to save the changes.
DIGITAL
SERVICE
002 MODEL
002 MODELNAME
XBR-85X950B
WRITE
16. Locate the Serial Number for the TV on the side of the Rear Cover.
MODEL NO
XBR-85X950B
SERIAL NO
1800001
17. Press
1
until
003 SERIAL item displays.
DIGITAL
SERVICE
002 MODEL
003 SERIAL
18. Press
0
to display the
Serial Number Edit option.
DIGITAL (MODEL)
SERVICE
SerialNumberEdit
*1 SerialNumber
Click on the first or last page to see other XBR-85X950B service manuals if exist.