DOWNLOAD Sony XBR-65X955B Service Manual ↓ Size: 6.6 MB | Pages: 34 in PDF or view online for FREE

XBR-65X955B 29

 

 

2-580-608-01 

SCREW, +PSW M5X16

 

 

 

(SCREWS TO ATTACH TABLE TOP STAND TO LCD TV) 

  

 

For product protection and safety reasons, Sony strongly recommends

 

 

 

that you use the screws provided with the TV.

 

 

 

CAUTION: These screws cannot be used to secure the TV

 

 

 

to the Wall Mount Brackets.

 

 

1-458-628-21 

3D GLASSES (SINGLE KIT)

 

 

4-262-708-04 

CLAMPER, CABLE

 

 

4-485-653-01 

CLAMPER, CABLE (M)

 

 

4-448-554-81 

MANUAL, INSTRUCTION (FOR 3D GLASSES)

 

 

4-533-568-11 

MANUAL, INSTRUCTION

 !   

1-492-686-22 

AC ADAPTOR

 !   

1-846-092-11 

POWER SUPPLY CORD (FOR AC ADAPTOR)

 

 

4-460-760-01 

CASE, BATTERY (FOR 3D GLASSES)

 

 

4-460-761-01 

PAD, NOSE (FOR 3D GLASSES)

 

 

A-2046-293-A 

PORT REPLICATOR BR

 

 

4-463-174-01 

BADGE, XBR LOGO

 

 

4-487-523-01 

CATCH, HOOK N

 

 

4-535-073-21 

CELL CUSHION 0415A

 

 

4-484-779-01 

CUSHION 825A (FOR REAR COVER)

 

 

4-452-920-01 

GASKET (TU)

  

2-639-807-12  JOINT

 

 

4-100-136-01 

SHEET (CORE), C

 

 

4-537-540-01 

SHEET, THERMAL (DDR)

 

 

4-298-004-01 

SPACER (B)

 

 

7-600-031-97 

TAPE (3M 1350FB-1) 15MMX66M BLK

 

 

4-443-737-02 

SUPPORT BELT KIT

 

 

1-492-758-21 

ONE TOUCH REMOTE (RMF-YD003)

 

 

1-492-714-21 

REMOTE COMMANDER (RM-YD099)

XBR-65X955B A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5. 

If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.

b. 

and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6. 

If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED. 

XBR-65X955B A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5. 

If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.

b. 

and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6. 

If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED. 

XBR-65X955B A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5. 

If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.

b. 

and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6. 

If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED.