DOWNLOAD Sony XBR-55X850B / XBR-65X850B Service Manual ↓ Size: 6.38 MB | Pages: 35 in PDF or view online for FREE

XBR-55X850B/65X850B 29

Rear Cover (4)

Stand to TV (4)

 

Holder Side (1), Bracket Wall (2), K Board (2), 

Tuner Board (4), Main Board (7), Bracket RC Up (4)

Cover Under (1), Reflector SP (4), Rear Cover (3), 

Smart Core (2), Bracket RC (2), Back Cover (SC) (1)

 

 

SCREW, ORNAMENTAL M6X12

SCREW, +PSW M3X6 W12

SCREW (+PSW) (M3X6)

SCREW, +BVTP 4X12 TYPE2 IT-3

2-580-607-01

NA

4-256-393-01

2-990-421-41

2-580-639-01

Rear Cover (10)

SCREW, +PSW M5X12

4-268-126-02

4-159-298-01

SCREW, +PSW M4X10 

Camera Module (1), AC Cover (1)

2-580-600-11

SCREW, +PSW M4X8

Holder Neck (8), Bracket Stand Left (3), 

Bracket Stand Right (3), Bracket Vesa (4)

Base Bracket Top (1), Bracket SP (4), Main Plate (8), 

Power Suply Board (5) 

Rear Cover (4)

Stand to TV (4)

Holder Side (1), Bracket Wall (2), K Board (2), 

Tuner Board (4), Main Board (7), Bracket RC Up (1)

Cover Under (1), Reflector SP (4), Rear Cover (3), 

Smart Core (2), Bracket RC (2), Back Cover (SC) (1)

Rear Cover (11)

Camera Module (1), AC Cover (1)

Holder Neck (8), Bracket Stand Left (3), 

Bracket Stand Right (3), Bracket Vesa (4)

Base Bracket Top (1), Bracket SP (4), Main Plate (8), 

Power Suply Board (5) 

SCREW, +PSW M3X6 W12

4-256-393-11

XBR-55X850B/65X850B 30

 

 

2-580-607-01 

SCREW, +PSW M5X12

 

 

 

(SCREWS TO ATTACH TABLE TOP STAND TO LCD TV) 

  

 

For product protection and safety reasons, Sony strongly recommends

 

 

 

that you use the screws provided with the TV.

 

 

 

CAUTION: These screws cannot be used to secure the TV

 

 

 

to the Wall Mount Brackets.

 

 

4-533-569-12 

MANUAL, INSTRUCTION

 

 

1-845-283-11 

IR BLASTER

 

 

X-2586-996-1 

PASSIVE 3D GLASSES (SINGLE KIT)

  

 

 

 

4-535-586-01 

BADGE, XBR LOGO

 

 

4-489-736-61 

CUSHION 1025A

 

 

4-538-934-01 

CUSHION 1825A

 

 

4-539-345-01 

CUSHION 525B

 

 

3-299-071-08 

FLYER, SAFETY

 

 

4-452-919-01 

GASKET (SC)

 

 

4-487-105-01 

SHEET, THERMAL (AYU2, A)

 

 

4-457-451-01 

SHEET, THERMAL (BAF)

 

 

3-674-673-22 

STOPPER (A)

 

 

7-600-031-97 

TAPE (3M 1350FB-1) 15MMX66M BLK

 

 

7-600-031-96 

TAPE (3M 1350FW-1) 15MMX66M WHT

 

 

4-414-470-01 

 SUPPORT BELT KIT

 

 

 

(XBR-55X850B ONLY)

 

 

4-443-737-02 

 SUPPORT BELT KIT

 

 

 

(XBR-65X850B ONLY)

 

 

1-492-758-11 

REMOTE COMMANDER (RMF-YD003)

 

 

1-492-766-11 

REMOTE COMMANDER (RM-YD102)

XBR-55X850B/65X850B A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5. 

If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.

b. 

and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6. 

If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED. 

XBR-55X850B/65X850B A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5. 

If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.

b. 

and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6. 

If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED.