Sony XBR-55HX950 / XBR-65HX950 Service Manual ▷ View online
XBR-55HX950/65HX950 16
SECTION 3 - FLOW CHARTS AND DIAGRAMS
NO 3D VIEWING
3D Not Working
Use video or still
camera to view IR
LED’s on IR
transmitter
IR LED’s lighting?
No
Double images
displayed on
screen?
Yes
Main Board*
No
Yes
Press “3D” button on
remote commander
and select
“Simulated 3D”
Shutter Glasses
View image with
known working
pair of shutter
glasses.
Double images
become one?
Yes
3D OK
No
3D IR Emitter
Board*
NO 3D FLOWCHART
*For Part Number information, refer to
“Section 4 - Disassembly/Part Number Information” on page 17
.
3D IR Emitter
(HEM3 Board)
(HEM3 Board)
XBR-55HX950/65HX950
17
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts of an assembly are indicated by the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
*
Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
LOOP STAND REMOVAL
XBR-55HX950 ONLY
A Remove 3 screws from the Base Loop Stand, then lift up the TV and gently place it face down onto a soft cloth.
Soft Cloth
A
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
(Check the Sony Authorized Servicer Portal at
http://www.sony.com/asp
website for any additional service related issues)
1
4-400-775-01
STAND, HEAD (MLG)
2
4-400-779-02
STAND, NECK T. S (2L)
3
4-414-292-01
COVER, ARCH PACKING
4
4-415-999-01
STAND, BASE LOOP
▲
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV.
CAUTION: These screws cannot be used to secure the TV to the Wall
Mount Brackets.
XBR-55HX950 ONLY
1
3
4
2
XBR-55HX950/65HX950
18
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
(Check the Sony Authorized Servicer Portal at
http://www.sony.com/asp
website for any additional service related issues)
XBR-65HX950 ONLY
A Lift up the TV and gently place it face down onto a soft cloth. Remove the 2 screws from the H, Cover (4LG).
B Slide up and remove the H, Cover.
C Remove the 4 screws from the Loop Stand (4LG).
D Slide and remove the Loop Stand.
A
LOOP STAND (4LG)
Soft Cloth
B
C
D
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
XBR-65HX950 ONLY
51
4-423-512-01
H, COVER (4LG)
52
4-423-932-01
STAND, LOOP (4LG)
▲
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO
LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV.
CAUTION: These screws cannot be used to secure the TV to the Wall
Mount Brackets.
▼
2-580-602-01
SCREW, +PSW M4X12
(SCREWS TO ATTACH H, COVER TO STAND LOOP)
51
52
XBR-55HX950/65HX950
19
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
(Check the Sony Authorized Servicer Portal at
http://www.sony.com/asp
website for any additional service related issues)
REAR COVER REMOVAL
REAR COVER CAUTION
The Rear Cover for these models has some sharp edges.
XBR-55HX950 ONLY
Refer to the following illustration when handling the Rear Cover.
Handle the
Rear Cover
using these
areas.
Use caution
when handling
this section.
Areas with red
have sharp
edges and are
Not reinforced.
Use caution with
these areas to
avoid damaging
the Rear Cover.
Areas with
yellow have
sharp edges.
Use caution
with these areas.
XBR-65HX950 ONLY
Refer to the following illustration when handling the Rear Cover.
Handle the
Rear Cover
using these
areas.
Use caution
when handling
this section.
Areas with red
have sharp
edges and are
Not reinforced.
Use caution with
these areas to
avoid damaging
the Rear Cover.
Areas with
yellow have
sharp edges.
Use caution
with these areas.
CAUTIONS:
The Rear Cover for these models has sharp edges, use gloves or a cloth for protection against the sharp edges.
Do not lift the Rear Cover from the bottom side, lifting the Rear Cover from the bottom side will deform and damage
The Rear Cover for these models has sharp edges, use gloves or a cloth for protection against the sharp edges.
Do not lift the Rear Cover from the bottom side, lifting the Rear Cover from the bottom side will deform and damage
the Rear Cover.
Follow the instructions below when removing the Rear Cover:
Follow the instructions below when removing the Rear Cover:
NOTE:
The Side Terminal Label, Rear Terminal Label, Left Rear Terminal Label, Under Terminal Label and Antenna Sheet (G)
The Side Terminal Label, Rear Terminal Label, Left Rear Terminal Label, Under Terminal Label and Antenna Sheet (G)
are not included with the Rear Cover and must be replaced when replacing the Rear Cover.
A To avoid damaging the AC Power Cord, remove the screw from the AC Cover and disconnect the AC Power
Cord.
Hold the
Power Supply Cord
Power Supply Cord
B
Remove the remaining screws from the Rear Cover.
22 from XBR-55HX950 Only
25 from XBR-65HX950 Only
C
Grasp the Rear Cover from inside the AC Cover opening and lift up. After loosening the bottom left corner of the Rear
Cover, gently begin to lift the Rear Cover towards the top left corner. Then using both hands, carefully lift-up the left side
of the Rear Cover.
D
After loosening the top right corner of the Rear Cover, gently begin to lift the Rear Cover towards the bottom right corner.
Then using both hands, carefully lift-up the right side to detach the Rear Cover.
CAUTION:
Lifting from the
bottom side will deform
and damage the Rear Cover
Click on the first or last page to see other XBR-55HX950 / XBR-65HX950 service manuals if exist.