Sony KV-XS29M80 Service Manual ▷ View online
– 9 –
KV
-XS29M80/XS29M97
-XS29M80/XS29M97
RM-954
RM-953
SECTION 1-1
GENERAL
(KV-XS29M80)
The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
2
WARNING
• Dangerously high voltages are present inside the TV.
• Operate the TV only between 110 – 240 V AC. (For Hong Kong only: 220 – 240 V AC).
To prevent fire or shock hazard, do not expose
the TV to rain or moisture.
the TV to rain or moisture.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
falls into it. Have it checked immediately by
qualified personnel only.
Do not open the cabinet and the rear cover of the
TV. Refer servicing to qualified personnel.
TV. Refer servicing to qualified personnel.
Do not install the TV in hot, humid or excessively
dusty places.
dusty places.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
Do not block the ventilation openings of the TV.
as a bookcase or built-in cabinet.
Do not block the ventilation openings of the TV.
Pull the power cord out by the plug. Do not pull
the power cord itself. Disconnect the TV if you
are not going to use it for several days.
the power cord itself. Disconnect the TV if you
are not going to use it for several days.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.
TV, the power cord and the antenna cable during
lightning storms.
Install the TV in a stable position. Do not allow
children to climb onto it.
children to climb onto it.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
power socket. Do not damage the power cord.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.
Using Your New TV
4
Using Your New TV
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the “Connecting a VCR” diagram below.
Connecting a VCR
To watch the video, press … (see page 12).
KV-XS29M80/XS29M50
: Signal flow
To video
and audio
outputs
and audio
outputs
KV-XS29M93
IEC connector
(not supplied)
(not supplied)
or
: Signal flow
Antenna cable (not supplied)
Antenna cable (not supplied)
Rear of TV
To … 1, 2 or 3
(video input)
(video input)
(yellow)
-L (MONO) (white)
-R (red)
-R (red)
Audio/Video cable
(not supplied)
(not supplied)
To S video
output
output
Rear of TV
VCR
To ˘
(antenna)
(antenna)
To antenna
output
output
To
(S video input)
(S video input)
To
(S video input)
(S video input)
Rear of TV
To antenna
output
output
To ˘
(antenna)
(antenna)
Antenna cable (not supplied)
VCR
(yellow)
-L (MONO) (white)
-R (red)
-R (red)
To video
and audio
outputs
and audio
outputs
To … 1 or 2
(video input)
(video input)
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R L
1
2
L(MONO)
R
WOOFER
1
2
3
L(MONO)
R
R
L
Y
C
B
C
R
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R L
S video cable
(not supplied)
(not supplied)
Audio/Video cable
(not supplied)
(not supplied)
To S video
output
output
Antenna cable (not supplied)
: Signal flow
S video cable
(not supplied)
(not supplied)
–
10
–
KV
-XS29M80/XS29M97
-XS29M80/XS29M97
RM-954
RM-953
5
Using Your New TV
Using Y
our New TV
Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a monaural VCR, connect the yellow plug to
(the yellow
jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• If both
(S video input) and … 1 (video input) at the rear of your TV
are input at the same time, the
(S video input) is automatically
selected. To view … 1 (video input), disconnect the S video cable.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
• KV-XS29M93 only
Do not connect video equipment to the … 3 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
Step 2
Insert the batteries
into the remote
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Tips
• If you want to stop the automatic channel presetting, press MENU twice.
• If your TV has preset an unwanted channel or cannot preset a particular
• If you want to stop the automatic channel presetting, press MENU twice.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 26).
Note (KV-XS29M80/XS29M50 only)
• During automatic channel presetting, your TV screen will indicate “B/G”,
• During automatic channel presetting, your TV screen will indicate “B/G”,
“I”, ”D/K” or “M” for the TV system (TV SYS).
Front of TV
1
2
CAUTION
Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
7
Using Your New TV
Using Y
our New TV
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
DVD, camcorder, video game or stereo system.
DVD, camcorder, video game or stereo system.
To watch the picture of the connected equipment, press … (see page 12).
Connecting a camcorder/video game equipment
using the … (video input) jacks
using the … (video input) jacks
Notes
• You can also connect video equipment to the … 1 or 2 (video input) jacks
• You can also connect video equipment to the … 1 or 2 (video input) jacks
at the rear of your TV.
• If both
(S video input) and … 3 (video input) at the front of your TV
are input at the same time, the
(S video input) is automatically
selected. To view … 3 (video input), disconnect the S video cable.
• KV-XS29M93 only
Do not connect video equipment to the … 3 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
Connecting audio/video equipment using the Ú
(monitor output) jacks
(monitor output) jacks
KV-XS29M80
To S video output
Front of TV
Camcorder
Video game
equipment
equipment
To video and
audio outputs
audio outputs
: Signal flow
To
(S video
input)
(S video
input)
To
…
3
(video input)
or
Audio/Video cable (not supplied)
S video cable (not supplied)
(MONO)
continued
(yellow)
-L (MONO)
(white)
-R (red)
Rear of TV
To
antenna
output
antenna
output
To video and
audio inputs
audio inputs
or
Audio system
To
audio
inputs
audio
inputs
VCR
: Signal flow
To Ú
(monitor
output)
(monitor
output)
Antenna cable (not supplied)
Audio/Video cable
(not supplied)
(not supplied)
1
2
L(MONO)
R
–
11
–
KV
-XS29M80/XS29M97
-XS29M80/XS29M97
RM-954
RM-953
Using Your New TV
10
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
A
With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.
the TV using the provided hole.
or
B
Put the cord or chain through the clamps to secure the TV against a wall or
pillar.
pillar.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
• Use only the supplied screws. Use of other screws may damage the TV.
20
mm
mm
A
B
3.8mm
or
Using Your New TV
8
Connecting optional components (continued)
(yellow)
-L (MONO)
(white)
-R (red)
Rear of TV
To
antenna
output
antenna
output
To video and
audio inputs
audio inputs
or
Audio system
To
audio
inputs
audio
inputs
VCR
: Signal flow
To Ú
(monitor
output)
(monitor
output)
Antenna cable (not supplied)
Audio/Video cable
(not supplied)
(not supplied)
WOOFER
1
2
3
L(MONO)
R
R
L
Y
C
B
C
R
Note
• If you select “DVD” on your TV screen, no signal will be output at the Ú
• If you select “DVD” on your TV screen, no signal will be output at the Ú
(monitor output) jacks (see page 12).
Connecting a DVD player using the … (video input) jacks
KV-XS29M80
KV-XS29M93 (not used for this model.)
DVD player
Audio/Video cable
(not supplied)
(not supplied)
(yellow)
-L (MONO) (white)
-R (red)
-R (red)
To … 1, or 2
(video input)
(video input)
: Signal flow
VIDEO
R-AUDIO-L
LINE OUT
1
2
3
L(MONO)
R
Rear of TV
KV-XS29M93
VIDEO
R-AUDIO-L
LINE OUT
1
2
3
L(MONO)
R
DVD player
Audio/Video cable
(not supplied)
(not supplied)
(yellow)
-L (MONO) (white)
-R (red)
-R (red)
To … 1, 2, or 3
(video input)
(video input)
: Signal flow
Rear of TV
–
12
–
KV
-XS29M80/XS29M97
-XS29M80/XS29M97
RM-954
RM-953
11
Using Your New TV
Using Y
our New TV
Watching the TV
This section explains functions used
while watching TV. Most operations can
be done using the remote.
while watching TV. Most operations can
be done using the remote.
1
Press U to turn on the TV.
When the TV is in the
standby mode (the u
indicator on the TV is lit
red), press u on the remote
or PROGR +/– on the TV.
standby mode (the u
indicator on the TV is lit
red), press u on the remote
or PROGR +/– on the TV.
2
Press PROGR +/– or
number buttons to select
the TV program.
number buttons to select
the TV program.
For double digit numbers,
press ÷, then the number
(e.g., for 25, press ÷, then
2 and 5).
press ÷, then the number
(e.g., for 25, press ÷, then
2 and 5).
¤
u
…
;
…
;
Number buttons
JUMP
.
+/–
PROGR +/–
1
4
7
-/--
2
5
8
0
3
6
9
FAVORITE
SOUND
MODE
PIC MODE
ENTER
MENU
A/B
SURROUND
MENU
+/–/ENTER
+/–/ENTER
or
u
indicator
1
2
3
4
5
6
7
8
0
-/--
9
To select a TV program quickly
(1) Press and hold PROGR +/–.
(2) Release PROGR +/– when the desired program number appears.
(2) Release PROGR +/– when the desired program number appears.
Note
• When you select a TV program quickly, the picture may be disrupted.
• When you select a TV program quickly, the picture may be disrupted.
This does not indicate a malfunction.
continued
Using Your New TV
12
To
Turn off temporarily
Turn off completely
Adjust the volume
Mute the sound
Watch the video input
(VCR, camcorder, etc.)
(VCR, camcorder, etc.)
Jump back to the previous channel
Display the on-screen information*
Do this
Press u. The u indicator on the TV lights up red.
Press U on the TV.
Press ¸ +/–.
Press ¤.
Press … to select “VIDEO 1”, “VIDEO 2” , “VIDEO 3”
or “DVD” (KV-XS29M93 only).
To return to the TV program, press ;.
or “DVD” (KV-XS29M93 only).
To return to the TV program, press ;.
Press JUMP.
Press
.
* The picture, sound, and either the program number or video mode are
displayed. The on-screen display for the picture and sound information
disappears after about 3 seconds.
disappears after about 3 seconds.
Changing the menu language
You can change the menu language as well as the on-screen language.
For details on how to use the menu, see “Introducing the menu system” on page 19.
Additional tasks
1
Press MENU.
2
Press + or – to select the
“SET UP” icon (
“SET UP” icon (
), then
press ENTER.
3
Make sure “LANGUAGE” is
selected, then press ENTER.
selected, then press ENTER.
4
Press + or – to select the
desired language (e.g,
desired language (e.g,
“
”), then press ENTER.
The selected menu language appears.
To return to the normal screen
Press MENU.
Watching the TV (continued)
MENU
ENTER
ENTER
ENTER
+
Click on the first or last page to see other KV-XS29M80 service manuals if exist.