DOWNLOAD Sony KV-XS29M80 Service Manual ↓ Size: 5.83 MB | Pages: 109 in PDF or view online for FREE

–

 21 

–

31

Additional Information

• Press ¸ + to increase the volume level.

• Press ¤ to cancel the muting.

• Press A/B until a good sound is

heard. (KV-XS29M93 only)

• Do not use a hair dryer or other

equipment near the TV.

• Adjust the antenna direction for

minimum interference. Contact a Sony
dealer for advice.

• Use a highly directional antenna.

• Use the fine tuning (“FINE”) function.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Turn off or disconnect the booster if it is

in use.

• Display the “A/V CONTROL” menu and

select “ADJUST” of “PICTURE MODE”,
then adjust the “COLOR” level.

• Display the “CH PRESET” menu and

check the color system (“COL SYS”)
setting (usually set this to “AUTO”).

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Keep external speakers or other electrical

equipment away from the TV. Do not
move the TV while the TV is turned on.
Press U (main power) on the TV to turn
off the TV for about five minutes, then
turn it on again.

• Press A/B until “AUTO” appears on the

screen.

• The volume level is

too low.

• The sound is muted.

• Broadcast signal has a

transmission problem.

• There is local

interference from cars,
neon signs, hair
dryers, power
generators, etc.

• Broadcast signals are

reflected by nearby
mountains or
buildings.

• The antenna direction

is inappropriate.

• Use of a booster is

inappropriate.

• The color level setting

is too low.

• The color system

setting is
inappropriate.

• The antenna direction

is inappropriate.

• The magnetic

disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.

• The stereo reception

setting is
inappropriate.

12

12

17

–

–

–

28

–

–

21

26

–

–

17

32

Additional Information

4

–

17

23

28

29

–

–

• Connection is loose or

the cable is damaged.

• The antenna direction

is inappropriate.

• Broadcast signal has a

transmission problem.

• The terrestrial

magnetism affects
your TV set.

• There is interference

from external sources,
e.g., heavy
machineries, nearby
broadcast station.

• Your TV may need

service.

• Changes in room

temperature
sometimes make the
TV cabinet expand or
contract, making a
noise. This does not
indicate a malfunction.

• The TV’s demagnetizing

function is working.
This does not indicate
a malfunction.

u

• Check the antenna cable and connection

on the TV, VCR and on the wall.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Press A/B until a good sound is

heard.

• Display the “SET UP” menu and adjust

“PIC ROTATION” so that the picture is
aligned to the TV screen.

• Use the fine tuning (“FINE”) function.

• Contact your nearest Sony service center.

                                  —

                                  —

–

 22 

–

33

Additional Information

(MONO)

PROGR

AUTO

PROGR

MENU

Preset channels automatically.

5

Turn off completely or

11

turn on the TV.
Select program number.

11

Adjust volume.

12

Select TV or video input.

12

Display the menu.

20

Headphones jack.

–

AUTO PROGR
!

PROGR +/–
2

 +/–

t

MENU
i

34

Additional Information

For general TV
operations

For Teletext
operations

Names/symbols of buttons
on the remote are indicated
in different colors to
represent the available
functions.

White

Green

PROGR +/–
0 – 9, ÷

.

 +/–

u

…

;

¤

JUMP

Timer operations

PIC MODE
SOUND MODE
FAVORITE
SURROUND

A/B

(KV-XS29M93 only)
Menu operations

MENU
+ or –

ENTER

Teletext operations

(Not used for KV-XS29M93/XS29M80/XS29M50)

p

 

(red, green,

yellow, blue)

Select program number.

11

Input numbers.

11

Adjust volume.

12

Turn off temporarily or

turn on the TV.

12

Select TV or video input.

12

Display the TV program.

12

Mute the sound.

12

Display on-screen information.

12

Jump to previous channel.

12

Set TV to turn on automatically.

13

Set TV to turn off automatically.

13

Select picture mode.

14

Select sound mode.

14

Display favorite channels.

15

Select surround mode.

16

Select stereo/bilingual mode.

17

Display the menu.

20

Select and adjust item.

20

Confirm selected item.

20

Display Teletext broadcast.

–

Enlarge the Teletext display.

–

Reveal concealed information.

–

Stop Teletext page from scrolling.

–

Display Teletext service contents.

–

Show TV screen while

–

waiting for Teletext page.

Access a Fastext menu

–

– 23 –

2

•  Dangerously high voltages are present inside the TV.

•  TV operating voltage: 110 – 240 V AC. (For Hong Kong only: 220 – 240 V AC).

To prevent fire or shock hazard, do not expose
the TV to rain or moisture.

Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.

Do not open the cabinet and the rear cover of the
TV. Refer servicing to qualified personnel.

Do not install the TV in hot, humid or excessively
dusty places.

Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
Do not block the ventilation openings of the TV.

Do not pull the power cord to disconnect the TV.
Pull it out by the plug. Disconnect the TV if you
are not going to use it for several days.

Install the TV in a stable position. Do not allow
children to climb onto it.

Do not plug in too many appliances to the same
power socket. Do not damage the power cord.

Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.

For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.

4

Using Your New TV

VIDEO

VIDEO IN

VIDEO OUT

AUDIO

R        L

WOOFER

If you wish to connect a VCR, see the “Connecting a VCR” diagram below.

Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.

To watch the video, press … (see page 11).

To … 1, 2 or 3
(video input)

To ˘
(antenna)

–

 24 

–

5

Using Your New TV

Notes
• If you connect a monaural VCR, connect the yellow plug to 

 (the

yellow jack) and the black plug to   -L (MONO) (the white jack).

• If you connect  a VCR  to the ˘ (antenna) terminal, preset the signal

output from the VCR to the program number 0 on the TV.

• If both 

 (S video input) and … 1 (video input) at the rear of your TV

are input at the same time, the 

 (S video input) is automatically

selected. To view … 1 (video input), disconnect the S video cable.

• Do not connect video equipment to … 3 (video input) at the front and the

rear of your TV at the same time; otherwise the picture will not be
displayed properly on the screen.

• When no signal is input to the connected video equipment, the TV screen

becomes blue.

Note
• Do not use old batteries nor use different types of batteries together.

Tip
• If you want to stop the automatic channel presetting, press MENU twice.

Note
• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 31).

6

Using Your New TV

WOOFER

(8 )

Attach the 3D WOOFER into the footholds on the top of your TV.

Connect the wires to the 3D WOOFER (8

Ω

) terminals at the rear of your TV.

The red wire should be connected to the ‘ red terminal and the black wire
to the ’ black terminal.

Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may

malfunction.

• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make

sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring speaker terminal.

You can enjoy high quality sound by connecting the 3D WOOFER.