Sony KV-XG29M85 Service Manual ▷ View online
KV
-XG29M85
-XG29M85
RM-952
–
9
–
–
Using Your New TV
6
Connecting the 3D WOOFER
WOOFER
(8
Ω)
3D WOOFER
Black wire
Red wire
1
2
1
Attach the 3D WOOFER into the footholds on the top of your TV.
2
Connect the wires to the 3D WOOFER (8
Ω) terminals at the rear of your TV.
The red wire should be connected to the ‘ red terminal and the black wire
to the ’ black terminal.
to the ’ black terminal.
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may
• Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make
• To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring speaker terminal.
with the neighbouring speaker terminal.
You can enjoy high quality sound by connecting the 3D WOOFER.
Rear of TV
Using Your New TV
Using Y
our New TV
7
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.
camcorder, video game or stereo system.
To watch the picture of the connected equipment, press t (see page 14).
Connecting a camcorder/video game equipment
using the t (video input) jacks
using the t (video input) jacks
Notes
• You can also connect video equipment to the t 1 or 2 (video input) jacks
• You can also connect video equipment to the t 1 or 2 (video input) jacks
at the rear of your TV.
• Do not connect video equipment to the t 2 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
not be displayed properly on the screen.
Connecting audio/video equipment using the T
(monitor output) jacks
(monitor output) jacks
2
(MONO)
ONE-PUSH AUTOMATIC PROGRAMING
Front of TV
Camcorder
Video game
equipment
equipment
To video and
audio outputs
audio outputs
(yellow)
-L (MONO)
(white)
-R (red)
Rear of TV
To
antenna
output
antenna
output
To video and
audio inputs
audio inputs
or
Audio system
To
audio
inputs
audio
inputs
VCR
: Signal flow
: Signal flow
To t 2
(video input)
(video input)
To T
(monitor
output)
(monitor
output)
or
Audio/Video cable (not supplied)
Antenna cable (not supplied)
Audio/Video cable
(not supplied)
(not supplied)
continued
–
10
–
KV
-XG29M85
-XG29M85
RM-952
Using Your New TV
Using Y
our New TV
9
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
A
With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.
the TV using the provided hole.
or
B
Put the cord or chain through the clamps to secure the TV against a wall or
pillar.
pillar.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
• Use only the supplied screws. Use of other screws may damage the TV.
20
mm
mm
A
B
3.8 mm
or
Using Your New TV
10
Presetting
channels
channels
You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
Presetting channels automatically
1
Press ! to turn on the TV.
2
Press AUTO PROGR.
Note
• During automatic channel presetting, your TV screen will indicate “B/G”,
• During automatic channel presetting, your TV screen will indicate “B/G”,
“I”, “D/K” or “M” for the TV system.
To preset channels automatically from a specified program number
(1) Press SELECT until “AUTO PROGRAM” appears.
(2) Press + or –.
The on-screen display will start flashing.
(3) Press PROGR +/– or the number buttons until the desired program number
appears.
(4) Press + or –.
1
Number buttons
SELECT
2
+/–
PROGR +/–
+ or –
PIC MODE
AUTO
PROGR
ONE-PUSH AUTOMATIC PROGRAMING
TV
1
2
3
4
6
7
8
9
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
-
2
VHF LOW B/G
KV
-XG29M85
-XG29M85
RM-952
–
11
–
Using Your New TV
Using Y
our New TV
11
or
Presetting channels manually
1
Press SELECT until
“MANUAL PROGRAM”
appears.
“MANUAL PROGRAM”
appears.
2
Press + or –.
3
Press PROGR +/– or the
number buttons until the
desired program number
appears.
number buttons until the
desired program number
appears.
4
Press + or – until the
desired channel picture
appears.
desired channel picture
appears.
5
Press SELECT.
Note
• If you preset a locked channel, that particular channel will be unlocked
• If you preset a locked channel, that particular channel will be unlocked
automatically (page 19).
To change the TV system setting
If the picture or sound is abnormal when receiving programs through the 8 (antenna)
terminal
terminal
(1) Press SELECT until “TV SYS” appears.
(2) Press + or – to select the appropriate
TV system until the picture or sound
quality is optimal.
quality is optimal.
b
SELECT
b
MANUAL PROGRAM
VHF LOW B/G
1
2
3
4
5
6
7
8
0
-/--
9
PROGR
1
SELECT
TV SYS: B/G
B/G
I
D/K
M
b
continued
Using Your New TV
12
To change the color system setting
If the color is abnormal when receiving programs through the 8 (antenna) terminal
or the t (video input) jack.
or the t (video input) jack.
(1) Press SELECT until “COL SYS” appears.
(2) Press + or – to select the appropriate
color system until the color is
optimal.
optimal.
Tip
• Normally set “COL SYS” to “AUTO”.
• Normally set “COL SYS” to “AUTO”.
Skipping program numbers
1
Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
program number appears.
2
Press SELECT until “MANUAL PROGRAM” appears.
3
Press + or –.
4
Press PIC MODE.
5
Press SELECT.
To preset the skipped program number again
Preset the channel automatically or manually.
Tip
• You can also use SELECT and
• You can also use SELECT and
2
+/– on the TV to preset channels and
skip program numbers.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems:
incomplete Teletext display double images and lines moving across the TV screen.
incomplete Teletext display double images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control once.
(4) Press
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control once.
(4) Press
to display “FINE” on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to return to normal screen.
COL SYS: AUTO
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
Presetting channels (continued)
–
12
–
KV
-XG29M85
-XG29M85
RM-952
Using Your New TV
14
Watching the TV (continued)
To
Turn off temporarily
Turn off completely
Mute the sound
Watch the video input
(VCR, camcorder, etc.)
(VCR, camcorder, etc.)
Jump back to the previous channel
Display the on-screen information*
Adjust the volume of all TV
programs automatically
programs automatically
Adjust the picture position when it
is not aligned to the TV screen
is not aligned to the TV screen
Do this
Press 1. The 1 indicator on the TV lights up red.
Press ! on the TV.
Press %.
Press t to select “VIDEO 1” or “VIDEO 2”.
To return to the TV program, press a.
To return to the TV program, press a.
Press JUMP.
Press
.
Press SELECT repeatedly until “INTELLIGENT VOL”
appears, then press + or – to select “ON”.
To cancel, select “OFF”.
appears, then press + or – to select “ON”.
To cancel, select “OFF”.
Press SELECT repeatedly until “PIC ROTATION”
appears, then press + or – to adjust the alignment of the
picture position.
appears, then press + or – to adjust the alignment of the
picture position.
The
or
icon on the screen flashes while
adjusting.
Additional tasks
* The picture, sound, and either the program number or video mode are
displayed. The on-screen display for the picture and sound information
disappears after about three seconds.
disappears after about three seconds.
Changing the on-screen display language
1
Press SELECT until
“LANGUAGE /
“LANGUAGE /
:
ENGLISH”appears on the
screen.
screen.
2
Press + or – to select
“ “.
“ “.
Tip
•
•
You can also use SELECT and 2 +/– on the TV to select the on-screen
display language.
display language.
b
b
SELECT
PIC ROTATION
LANGUAGE / : ENGLISH
LANGUAGE / :
Using Your New TV
Using Y
our New TV
13
Watching the TV
This section explains functions used
while watching the TV. Most operations
can be done using the remote.
while watching the TV. Most operations
can be done using the remote.
1
Press ! to turn on the TV.
When the TV is in the
standby mode (the 1
indicator on the TV is lit
red), press 1 on the remote
or PROGR +/– on the TV.
standby mode (the 1
indicator on the TV is lit
red), press 1 on the remote
or PROGR +/– on the TV.
2
Press PROGR +/– or the
number buttons to select
the TV program.
number buttons to select
the TV program.
For double digit numbers,
press -, then the number
(e.g., for 25, press -, then
2 and 5).
press -, then the number
(e.g., for 25, press -, then
2 and 5).
3
Press 2 +/– to adjust the
volume.
volume.
%
1
t
a
t
a
Number buttons
SELECT
2
+/–
PROGR +/–
+ or –
JUMP
or
TV
1
2
3
4
6
7
8
9
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
-
2
1
2
3
4
5
6
7
8
0
-/--
9
PROGR
ONE-PUSH AUTOMATIC PROGRAMING
continued
Click on the first or last page to see other KV-XG29M85 service manuals if exist.