DOWNLOAD Sony KV-XG29M85 Service Manual ↓ Size: 5.61 MB | Pages: 74 in PDF or view online for FREE

–

 17 

–

Additional Information

23

If you find any problem while viewing your TV, please check the following guide. If
any problem persists, contact your Sony dealer.

• Check the antenna cable and connection

on the TV, VCR and on the wall.

• Press SELECT until “MANUAL

PROGRAM” appears on the screen, then
preset the channel again.

• Check the antenna type (VHF/UHF).

Contact a Sony dealer for advice.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Try using a booster.

• Turn off or disconnect the booster if it is

in use.

• If the sound of some channels are noisy,

select the channel, then select the
appropriate TV system (“TV SYS”).

• Check the power cord, antenna and the

VCR connections.

• Press 1 (power).

• Press ! (main power) on the TV to turn

off the TV for about five seconds, then
turn it on again.

• Connection is loose or

the cable is damaged.

• Channel presetting is

inappropriate or
incomplete.

• The antenna type is

inappropriate.

• The antenna direction

is inappropriate.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The TV system setting

is inappropriate.

• The power cord,

antenna or VCR is not
connected.

• The TV is not turned

on.

4

11

–

–

–

–

11

4

14

13

Additional Information

24

• Press 2 + to increase the volume level.

• Press % to cancel the muting.

• Do not use a hair dryer or other

equipment near the TV.

• Adjust the antenna direction for

minimum interference. Contact a Sony
dealer for advice.

• Use a highly directional antenna.

• Use the fine tuning (FINE) function.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Turn off or disconnect the booster if it is

in use.

• Press SELECT until “COLOR” appears

on the screen, then press + or – to adjust
the color level.

• Press SELECT until “COL SYS” appears

on the screen, then check the color
system setting (usually set this to
“AUTO”).

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Keep external speakers or other electrical

equipment away from the TV. Do not
move the TV while the TV is turned on.
Press ! (main power) on the TV to turn
off the TV for about 15 minutes, then turn
it on again.

• The volume level is too

low.

• The sound is muted.

• There is local

interference from cars,
neon signs, hair
dryers, power
generators, etc.

• Broadcast signals are

reflected by nearby
mountains or buildings.

• The antenna direction

is inappropriate.

• Use of a booster is

inappropriate.

• The color level setting

is too low.

• The color system

setting is
inappropriate.

• The antenna direction

is inappropriate.

• The magnetic

disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.

13

14

–

–

–

12

–

–

17

12

–

–

–

 18 

–

Additional Information

25

20

4

–

–

12

–

14

12

22

—

—

—

• Check the antenna cable and connection

on the TV, VCR, and at the wall.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Try using a booster.
• Use the fine tuning (FINE) function.

• Keep external speakers or other electrical

equipment away from the TV.

• Press SELECT until “PIC ROTATION”

appears on the screen, then press + or –
to adjust the picture position until it is
optimal.

• Use the fine tuning (FINE) function.

• Contact your nearest Sony service center.

—

—

—

• The channel carries no

Teletext broadcast.

• Connection is loose or

the cable is damaged.

• The antenna direction

is inappropriate.

• Signal transmission is

too low.

• The magnetic

disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.

• There is interference

from external sources,
e.g.,heavy
machineries, nearby
broadcast station.

• Your TV may need

service.

• Changes in room

temperature
sometimes make the
TV cabinet expand or
contract, making a
noise. This does not
indicate a malfunction.

• The TV’s demagnetizing

function is working.
This does not indicate a
malfunction.

1

Additional Information

26

PROGR

SELECT

 AUTO
PROGR

2

(MONO)

Preset channels automatically.

5

Select the desired item.

11

Select program number.

13

Turn off completely or

13

turn on the TV.
Adjust volume.

13

Select TV or video input.

14

Headphone jack.

–

AUTO PROGR
SELECT

PROGR +/–

!

2 

+/–

t

i

–

 19 

–

Additional Information

27

ONE-PUSH  AUTOMATIC  PROGRAMING

2

Preset channels automatically.

5

Select the desired item.

11

Select program number.

13

Turn off completely or turn on

13

the TV.
Adjust volume.

13

Select TV or video input.

14

Headphone jack.

–

AUTO PROGR
SELECT

PROGR +/–

!

2 

+/–

t

i

Additional Information

28

The names/symbols of
buttons on the remote are
indicated in different colors to
represent the available
functions.

White

Green

For general TV
operations

For Teletext
operations

TV

1

2

3

4

6

7

8

9

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

-

2

SELECT
+/–
PROGR +/–
0 – 9, -
2

 +/–

1

t

a

%

JUMP
Timer operations

PIC MODE
SOUND MODE
FAVORITE
Stereo/bilingual operations
(Not used for these model)

A/B

Teletext operations

x

 

(red, green,
yellow, blue)

Select the desired item.

11

Adjust value.

11

Select program number.

13

Input numbers.

13

Adjust volume.

13

Turn off temporarily or

14

turn on the TV.
Select TV or video input.

14

Display the TV program.

14

Mute the sound.

14

Display on-screen information.

14

Jump to previous channel.

14

Set TV to turn on automatically.

15

Set TV to turn off automatically.

15

Select picture mode.

16

Select sound mode.

16

Display favorite channels.

18

Select stereo/bilingual mode.

–

Display Teletext broadcast.

20

Enlarge the Teletext display.

21

Reveal concealed information.

21

Stop Teletext display from

21

scrolling.
Display Teletext service contents.

21

Show TV screen while

21

waiting for Teletext page.
Access a FASTEXT menu.

21

– 20 –

1 3D Speaker box assy

Red wire

Black wire

2 Eight screws
     (+BVTP 4 

× 16)

3 Three screws
     (+BVTP 4 

× 16)

1 Rear cover

1 Eight screws
  (+BVTP 4 

× 16)

4 Four screws
  (+BVTP 3 

× 12)

3 Four screws
  (+BVTP 3 

× 16)

5 Bracket, speaker

2 Speaker
 (15 

× 6.5cm)

1 Chassis assy

Undress necessary wires that creates tension while
placing the chassis into Service Position.