DOWNLOAD Sony KV-XA34M66 Service Manual ↓ Size: 16.98 MB | Pages: 127 in PDF or view online for FREE

–

 9 
–

4

Using Your New TV

1

2

3

R

L

Y

C

B

C

R

VIDEO

VIDEO IN

VIDEO OUT

AUDIO

R       L

To t 1, 2 or 3
(video input)

To 8
(antenna)

CAUTION
• Do not connect the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries

from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.

If you wish to connect a VCR, see the Connecting a VCR diagram below.

To watch the video input, press t (see page 10).

5

Using Your New TV

PROGR

MENU

AUTO
PROGR

ENTER

SELECT

L(MONO)

3

Notes
• If you connect a monaural VCR, connect the yellow plug to 

 (the

yellow jack) and the black plug to   -L (MONO) (the white jack).

• If you connect  a VCR  to the 8 (antenna) terminal, preset the signal

output from the VCR to the program number 0 on the TV.

• If both 

 (S video input) and … 1 (video input) at the rear of your TV

are input at the same time, the 

 (S video input) is automatically

selected. To view t 1 (video input), disconnect the S video cable.

• Do not connect video equipment to t 3 (video input) at the front and

the rear of your TV at the same time; otherwise the picture will not be
displayed properly on the screen.

• When no signal is input from the connected video equipment, the TV

screen becomes blue.

Note
• Do not use old batteries nor use different types of batteries together.

Tips
• If you want to stop the automatic channel presetting, press MENU.
• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 32).

Note
• During automatic channel presetting, your TV screen will indicate “B/G”,

“I”, “D/K” or “M” for the TV system (“TV SYS”).

–

 10 

–

6

Using Your New TV

You can connect optional audio/video components, such as a VCR, multi disc player,
DVD, camcorder, video game or stereo system. To watch the picture of the connected
equipment, press t (see page 10).

Connecting a camcorder/video game equipment
using the t (video input) jacks

Notes
• You can also connect video equipment to the t 1, 2 or 3 (video input)

jacks at the rear of your TV.

• If both 

 (S video input) and t 3 (video input) at the front of your TV

are input at the same time, the 

 (S video input) is automatically

selected. To view t 3 (video input), disconnect the S video cable.

• Do not connect video equipment to the t 3 (video input) jacks at the

front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.

Connecting audio/video equipment using the T
(monitor output) jacks

Note
• If you select “DVD” on your TV screen, no signal will be output at the T

(monitor output) jacks (see page 10).

t

To T
(monitor
output)

PROGR

MENU

AUTO
PROGR

ENTER

SELECT

L(MONO)

3

L (MONO)

R

3

7

Using Your New TV

• Some DVD player terminals may be labeled differently:

• Since the high quality pictures on a DVD disc contain a lot of information,

picture noise may appear. In this case, adjust the sharpness (“SHARP”) in the
“ADJUST” menu of the “PICTURE MODE” menu (see page 25).

• Connect your DVD player directly to your TV. Connecting the DVD player

through other video equipment will cause unwanted picture noise.

1 Connect R and L under 

 (component video input) on your TV to the LINE OUT,

AUDIO R and L output connectors on your DVD player.

2 Using a component video cable, connect Y, C

B

, and C

R

 under 

 (component video

input) on your TV to the COMPONENT VIDEO OUT Y, C

B

, and C

R

 output

connectors on your DVD player.

Y (green)

Y

C

B

 (blue)

C

b

, B-Y or P

B

C

R

 (red)

C

r

, R-Y or P

R

VIDEO 

R-AUDIO-L

LINE  OUT

Y 

COMPONENT VIDEO OUT

S VIDEO OUT

C

B

 

C

R

 

Connecting a DVD player using the t (video input) jacks

VIDEO 

R-AUDIO-L

LINE  OUT

 (yellow)

To t 1, 2, or 3
(video input)

–

 11 

–

8

Using Your New TV

To prevent the TV from falling, secure the TV using one of the following methods:

A

With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.

B

Put the cord or chain through the clamps to secure the TV against a wall or
pillar.

Note
• Use only the supplied screws. Use of other screws may damage the TV.

A

B

9

Using Your New TV

This section explains various functions
and operations available while watching
the TV. Most operations can be done
using the remote.

Press 

!

 to turn on the TV.

When the TV is in the
standby mode (the 

1

indicator on the TV is lit
red), press ?/1 on the
remote or PROGR +/– on
the TV.

Press PROGR +/– or
number buttons to select
the TV program.

For double digit numbers,
press 

-

, then the number

(e.g., for 25, press 

-

,  then

2 and 5).

(1) Press and hold PROGR +/–.
(2) Release PROGR +/– when the desired program number appears.

Note
• When you select a TV program quickly, the picture may be disrupted.

This does not indicate a malfunction.

%

t

a

2

V/b/v/B/ENTER

 1

PROGR

MENU

AUTO
PROGR

ENTER

SELECT

L(MONO)

3

PROGR

MENU

AUTO

PROGR

ENTER

SELECT

?/1

– 12 –

10

Using Your New TV

* The picture, sound, and either the program number or video mode are

displayed. The on-screen display for the picture and sound information
disappears after about 3 seconds.

You can change the menu language as well as the on-screen language.

For details on how to use the menu, see “Introducing the menu system” on page 21.

Press MENU.

Press V or v to select the
“SETUP” icon (

),

then press ENTER.

Make sure “LANGUAGE”
is selected, then press
ENTER.

Press V or v to select the
desired language (e.g.,
“

”), then press

ENTER.

The selected menu language appears.

Press MENU.

?/1

. The 1 indicator on the TV lights up red.

!

 on the TV.

2

 +/–.

%

.

t to select “VIDEO 1”, “VIDEO 2” , “VIDEO 3”or “DVD”. To
return to the TV program, press a (or t on the TV).

JUMP.

.

ENTER

ENTER

ENTER

ENTER

ENTER

P I C T URE +

+MO

C

P I C T URE

I N T E L L I GEN T P I C : OF F

WI DE MODE : OF F

DE : DYNAM I

E

CO L OR S Y S : AU TO

S E T UP

PROGRAM S E T UP

P I C ROT A T I ON

NG L I SH

L ANGUAGE :

L ANGUAGE :

CO L OR S Y S :

S E T UP

PROGRAM S E

P I C ROT A T I

ENG L I SH

Turn off temporarily

Turn off completely

Adjust the volume

Mute the sound

Watch the video input
(VCR, camcorder, etc.)

Jump back to the previous channel

Display the on-screen information*

11

Using Your New TV

You can change the menu language as well as the on-screen language.

For details on how to use the menu, see Introducing the menu system on page 20.

Press MENU.

Press V or v to select the
“SETUP” icon (

),

then press ENTER.

Make sure “LANGUAGE”
is selected, then press
ENTER.

Press V or v to select the
desired language (e.g.,
“

”), then press

ENTER.

The selected menu language appears.

Press MENU.

ENTER

ENTER

ENTER

ENTER

ENTER

P I C T URE +

+MO

C

P I C T URE

I N T E L L I GEN T P I C : OF F

WI DE MODE : OF F

DE : DYNAM I

E

CO L OR S Y S : AU TO

S E T UP

PROGRAM S E T UP

P I C ROT A T I ON

NG L I SH

L ANGUAGE :

L ANGUAGE :

CO L OR S Y S :

S E T UP

PROGRAM S E

P I C ROT A T I

ENG L I SH