DOWNLOAD Sony KV-XA34M66 Service Manual ↓ Size: 16.98 MB | Pages: 127 in PDF or view online for FREE

–

 25 

–

35

Additional Information

• Check the antenna cable and connection

on the TV, VCR and on the wall.

• Display the “CH PRESET” menu and

select “MANUAL PROGRAM” to preset
the channel again.

• Check the antenna type (VHF/UHF).

Contact a Sony dealer for advice.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Try using a booster.

• Display the “CH PRESET” menu and

select “MANUAL PROGRAM”. Then,
select “

 SENS: LOW”.

• Turn off or disconnect the booster if it is

in use.

• If the sound of all the channels are noisy,

display the “CH PRESET” menu and
check the TV system (“TV SYS”) setting,
then select “AUTO PROGRAM” to preset
the channels again.

• If the sound of some channels are noisy,

select the channel, then display the “CH
PRESET” menu and select the appropriate
TV system (“TV SYS”).

• Check the power cord, antenna and the

VCR connections.

• Press ?/1 (power).

• Press ! (main power) on the TV to turn

off the TV for about five seconds, then
turn it on again.

If you find any problem while viewing your TV, please check the following guide. If
any problem persists, contact your Sony dealer.

• Connection is loose or

the cable is damaged.

• Channel presetting is

inappropriate or
incomplete.

• The antenna type is

inappropriate.

• The antenna direction

is inappropriate.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The TV system setting

or channel presetting
is inappropriate or
incomplete.

• The power cord,

antenna or VCR is not
connected.

• The TV is not turned

on.

4

31

–

–

–

31

–

31

31

4

9

9

36

Additional Information

• Press 2 + to increase the volume level.

• Press % to cancel the muting.

• Press A/B until a good sound is heard.

(KV–XA34M66 only)

• Do not use a hair dryer or other

equipment near the TV.

• Adjust the antenna direction for

minimum interference. Contact a Sony
dealer for advice.

• Use a highly directional antenna.

• Use the fine tuning (“FINE”) function.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Turn off or disconnect the booster if it is

in use.

• Display the “PICTURE” menu and select

“ADJUST” of “PICTURE MODE”, then
adjust the “COLOR” level.

• Display the “SETUP” menu and check the

color system (“COLOR SYS”) setting
(usually set this to “AUTO”).

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Keep external speakers or other electrical

equipment away from the TV. Do not
move the TV while the TV is turned on.
Press ! (main power) on the TV to turn
off the TV for about five minutes, then
turn it on again.

• Press A/B until “AUTO” appears on the

screen.

• The volume level is

too low.

• The sound is muted.

• Broadcast signal has a

transmission problem.

• There is local

interference from cars,
neon signs, hair
dryers, power
generators, etc.

• Broadcast signals are

reflected by nearby
mountains or
buildings.

• The antenna direction

is inappropriate.

• Use of a booster is

inappropriate.

• The color level setting

is too low.

• The color system

setting is
inappropriate.

• The antenna direction

is inappropriate.

• The magnetic

disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.

• The stereo reception

setting is
inappropriate.

10

10

17

–

–

–

33

–

–

24

29

–

–

17

–

 26 

–

37

Additional Information

• Check the antenna cable and connection

on the TV, VCR and on the wall.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Press A/B until a good sound is heard.

          —

• Check the antenna cable and connection

on the TV, VCR and on the wall.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Try using a booster.

• Use the fine tuning (“FINE”) function.

• Keep external speakers or other electrical

equipment away from the TV.

• Display the “SETUP” menu and adjust

“PIC ROTATION” so that the picture is
aligned to the TV screen.

• Use the fine tuning (“FINE”) function.

• Contact your nearest Sony service center.

—

 —

• Connection is loose or

the cable is damaged.

• The antenna direction

is inappropriate.

• Broadcast signal has a

transmission problem.

• The channel carries no

Teletext broadcast.

• Connection is loose or

the cable is damaged.

• The antenna direction

is inappropriate.

• Signal transmission is

too low.

• The magnetic disturbance

from external speakers or
other equipment, or the
direction of the earth’s
magnetic field may affect
the TV.

• There is interference

from external sources,
e.g., heavy
machineries, nearby
broadcast station.

• Your TV may need

service.

• Changes in room

temperature
sometimes make the
TV cabinet expand or
contract, making a
noise. This does not
indicate a malfunction.

• The TV’s demagnetizing

function is working.
This does not indicate
a malfunction.

The 1 indicator on

4

–

17

19

4

–

–

33

–

29

33

34

–

–

–

 27 

–

38

Additional Information

Incorrect antenna direction may cause:

For better viewing, please check the following connections.

• Snowy

• Distorted

• Noisy/

picture

picture

distorted
sound

Wrong type of antenna
may cause:

• No picture

• Snowy picture

Loose connection may
cause:

• Snowy picture

• Distorted sound

Too strong signal level
may cause:

• Distorted picture

• Noisy sound

39

Additional Information

P166 SECTEXT   166   FR1  MAR   03:59:09

Fom Singapore

To PARIS

To OSAKA

To ROMA

To SYDNEY

Day   Dep/Arr       Flight    Alrcraft

1.6   220/0588     SQ28       747
   2   2130/1225   PA115      L15 
   3   2115/1330   SQ26       747

2.7   2130/0745   SQ24       747
   4   2300/0915   AZ487     747

2.5   1000/1715   SQ6         747
4.6   0930/2015   CX522     L10 

   1   2210/0610   SQ21A    747 
   2   2100/0835   SQ21A    747

Loose connection may
cause:

• Snowy picture

• Distorted sound

• No picture

For more information, please see
Troubleshooting

 on page 35 or consult

your dealer for guidance.

Loose connection may cause:

• no power

• no picture with no sound

• Missing

Teletext
characters

• Double

image
picture

–

 28 

–

40

Additional Information

L (MONO)

R

3

PROGR

MENU

AUTO
PROGR

ENTER

SELECT

L(MONO)

3

PROGR

MENU

AUTO

PROGR

ENTER

SELECT

Preset channels automatically.

5

Turn off completely or

9

turn on the TV.
Select program number.

9

Standby indicator.

9

Adjust volume.

10

Select TV or video input.

10

Wake Up indicator.

11

Stereo/Bilingual indicator.

17

Display the menu.

23

Headphones jack.

–

AUTO PROGR

!

PROGR +/–

1

2

t

(KV-XA34M66 only)

MENU

i

38

Additional Information

10

10
10
11
11
11
11
11
11

12
12
13
13
14

15
16
16
16
16

17

–

18
19
19
19
19
19

19
19

19

22
22
22

The names/symbols of buttons
on the remote are indicated in
different colors to represent the
available functions.

White

Green

Yellow

For general TV
operations

For Teletext
operations

For PIP operations

Turn off temporarily or turn

on the TV.
Select program number.
Input numbers.
Adjust volume.
Select TV or video input.
Display the TV program.
Mute the sound.
Display on-screen information.
Jump to previous program number.

Set TV to turn on automatically.
Set TV to turn off automatically.
Select picture mode.
Select sound mode.
Display favorite channels.

Display a sub screen.
Swap main and sub screens.
Freeze the sub screen.
Select video input for the sub screen.
Change program number in the sub

screen.
Select surround mode.

Select stereo/bilingual mode.

Display Teletext broadcast.
Enlarge the Teletext display.
Reveal concealed information.
Stop Teletext page from scrolling.
Display Teletext service contents.
Show TV screen while waiting

for Teletext page.
Input Teletext page number.
Display the next or previous page.
Access a FASTEXT menu.

Display the menu.
Select and adjust item.
Confirm selected item.

?/1

PROGR +/–
0 – 9, -
2

 +/–

t

a

%

JUMP
Timer operations

PIC MODE
SOUND MODE
FAVORITE

PIP operations

V/v

(PIP PROGR +/–)

SURROUND
Stereo/bilingual operations

(KV-XA34M66 only)

A/B
Teletext operations

0 – 9
PROGR +/–

 

(red, green,

yellow, blue)

Menu operations

MENU
V/b/v/B
ENTER