Sony KV-XA34M60 Service Manual ▷ View online
–
21
–
KV
-XA34M60
-XA34M60
RM-954
31
Additional Information
• Press 2 + to increase the volume level.
• Press % to cancel the muting.
• Press A/B until a good sound is
heard.
• Do not use a hair dryer or other
equipment near the TV.
• Adjust the antenna direction for
minimum interference. Contact a Sony
dealer for advice.
dealer for advice.
• Use a highly directional antenna.
• Use the fine tuning (“FINE”) function.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Turn off or disconnect the booster if it is
in use.
• Display the “PICTURE” menu and select
“ADJUST” of “PICTURE MODE”, then
adjust the “COLOR” level.
adjust the “COLOR” level.
• Display the “SETUP” menu and check the
color system (“COLOR SYS”) setting
(usually set this to “AUTO”).
(usually set this to “AUTO”).
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Keep external speakers or other electrical
equipment away from the TV. Do not
move the TV while the TV is turned on.
Press ! (main power) on the TV to turn
off the TV for about five minutes, then
turn it on again.
move the TV while the TV is turned on.
Press ! (main power) on the TV to turn
off the TV for about five minutes, then
turn it on again.
• Press A/B until “AUTO” appears on the
screen.
• The volume level is
too low.
• The sound is muted.
• Broadcast signal has a
transmission problem.
• There is local
interference from cars,
neon signs, hair
dryers, power
generators, etc.
neon signs, hair
dryers, power
generators, etc.
• Broadcast signals are
reflected by nearby
mountains or
buildings.
mountains or
buildings.
• The antenna direction
is inappropriate.
• Use of a booster is
inappropriate.
• The color level setting
is too low.
• The color system
setting is
inappropriate.
inappropriate.
• The antenna direction
is inappropriate.
• The magnetic
disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
• The stereo reception
setting is
inappropriate.
inappropriate.
Possible cause
Symptom
Solutions
Page
11
11
16
–
–
–
28
–
–
21
24
–
–
16
Good picture
No sound
Dotted lines or
stripes
Double images or
“ghosts”
No color
Abnormal color
patches
TV cannot receive
stereo broadcast
signal.
continued
32
Additional Information
Possible cause
Symptom
Solutions
4
–
16
–
24
28
29
–
–
Stereo broadcast
sound switches
on and off or
is distorted.
sound switches
on and off or
is distorted.
or
The sound switches
between monaural
and stereo
frequently.
between monaural
and stereo
frequently.
Picture slant
Lines moving across
the TV screen.
the TV screen.
The 1 indicator on
your TV flashes red
a number of times
between 3-second
intervals.
your TV flashes red
a number of times
between 3-second
intervals.
TV cabinet creaks.
A “boom” sound is
heard when the
TV is turned on.
heard when the
TV is turned on.
• Connection is loose or
the cable is damaged.
• The antenna direction
is inappropriate.
• Broadcast signal has a
transmission problem.
• The magnetic
disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
• There is interference
from external sources,
e.g., heavy
machineries, nearby
broadcast station.
e.g., heavy
machineries, nearby
broadcast station.
• Your TV may need
service.
• Changes in room
temperature
sometimes make the
TV cabinet expand or
contract, making a
noise. This does not
indicate a malfunction.
sometimes make the
TV cabinet expand or
contract, making a
noise. This does not
indicate a malfunction.
• The TV’s demagnetizing
function is working.
This does not indicate
a malfunction.
This does not indicate
a malfunction.
• Check the antenna cable and connection
on the TV, VCR and on the wall.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Press A/B until a good sound is
heard.
• Keep external speakers or other electrical
equipment away from the TV.
• Display the “SETUP” menu and adjust
“PIC ROTATION” so that the picture is
aligned to the TV screen.
aligned to the TV screen.
• Use the fine tuning (“FINE”) function.
• Contact your nearest Sony service center.
—
—
Page
Troubleshooting (continued)
–
22
–
KV
-XA34M60
-XA34M60
RM-954
34
Additional Information
Remote control
1
4
7
-/--
2
5
8
0
3
6
9
FAVORITE
SOUND
MODE
PIC MODE
ENTER
MENU
A/B
SURROUND
Button function
For general TV
operations
operations
For Teletext
operations
operations
Names/symbols of buttons
on the remote are indicated
in different colors to
represent the available
functions.
on the remote are indicated
in different colors to
represent the available
functions.
Label color
White
Green
Page
Button
Function
?/1
PROGR +/–
0 – 9, -
2
+/–
t
a
%
JUMP
Timer operations
PIC MODE
SOUND MODE
FAVORITE
SOUND MODE
FAVORITE
SURROUND
Stereo/bilingual operations
Stereo/bilingual operations
A/B
Teletext operations
(Not used for KV-XA34M60/XA29M60/XA25M63/
XA25M60)
(Not used for KV-XA34M60/XA29M60/XA25M63/
XA25M60)
0 – 9
PROGR +/–
PROGR +/–
x
(red, green,
yellow, blue)
Menu operations
MENU
+ or –
+ or –
ENTER
Turn off temporarily or
turn on the TV.
10
Select program number.
10
Input numbers.
10
Adjust volume.
11
Select TV or video input.
11
Display the TV program.
11
Mute the sound.
11
Display on-screen information.
11
Jump to previous program
number.
11
Set TV to turn on automatically.
12
Set TV to turn off automatically.
12
Select picture mode.
13
Select sound mode.
13
Display favorite channels.
14
Select surround mode.
15
Select stereo/bilingual mode.
16
Display Teletext broadcast.
–
Enlarge the Teletext display.
–
Reveal concealed information.
–
Stop Teletext display from scrolling.
–
Display Teletext service contents.
–
Show TV screen while
–
waiting for Teletext page.
Input Teletext page number.
–
Display the next or previous page.
–
Access a Fastext menu
–
Display the menu.
19
Select and adjust item.
19
Confirm selected item.
19
Overview of controls (continued)
33
Additional Information
Overview of controls
TV front panel
L (MONO)
R
3
PROGR
MENU
AUTO
PROGR
ENTER
SELECT
PROGR
MENU
AUTO
PROGR
PROGR
ENTER
SELECT
L(MONO)
3
Page
Function
Button
Preset channels automatically.
5
Turn off completely or
10
turn on the TV.
Select program number.
Select program number.
10
Standby indicator
10
Adjust volume.
11
Select TV or video input.
11
Wake Up indicator
12
Stereo/bilingual indicator.
16
Display the menu.
19
Select and adjust items.
19
Confirm selected items.
19
Headphones jack.
–
continued
AUTO PROGR
!
!
PROGR +/–
1
2
+/–
t
Menu operations
MENU
SELECT
SELECT
/
ENTER
i
– 23 –
KV
-XA34M60
-XA34M60
RM-954
SECTION 2
DISASSEMBLY
2-1. REAR COVER REMOVAL
2-2. SPEAKER REMOVAL
1
Two screws
(+BVTP 4
× 16)
2
Two screws washer head
(+P 4
× 16)
2-3. CHASSIS ASSY REMOVAL
2-4. F BRACKET REMOVAL
3
F Board bracket
4
F Board
1
Three connectors
5
Two claws
2
Two screws
(+BVTP 3
× 12)
2
Rear cover
1
Four screws
(+BVTP 4
× 16)
1
Ten screws
(+BVTP 4
× 16)
2-5. SERVICE POSITION
Note:
1. Undress necessary wires before going to Service
Position.
–
24
–
KV
-XA34M60
-XA34M60
RM-954
2-6. REPLACEMENT OF PARTS
For replacement of light guide,unscrew
them, exchange with new parts and fix
them with screws respectively.
them, exchange with new parts and fix
them with screws respectively.
One screw
(+BVTP 3
(+BVTP 3
× 12)
2-6-1. Light Guide
2-6-2. Power Button
1 Push the claw to direction
of arrow and remove
of arrow and remove
2 Spring compression
3 Power Button
2-7. HV CAP BLOCK, PWB HOLDER, DH AND
J BOARD REMOVAL
J Board
3
PWB holder
6
Terminal bracket
7
Bracket HVC
HV Cap block
5
One screw
(+BVTP 4
× 16)
4
Two screws
(+BVTP 3
× 12)
1
Two screws
(+BVTP 3
× 12)
2
One screw
(+BVTP 3
× 12)
One screw
(+BVTP 3
× 12)
DH board
2-9. D2 BOARDS REMOVAL
1
Three connectors
3
D2 board
2
One claw
2-8. TERMINAL BRACKET REMOVAL
1
J Board
4
One screw
(+BVTP 4
× 16)
3
Two screws
(+BVTP 3
× 12)
2
Two screws
(+BVTP 3
× 12)
5
Terminal bracket
6
Two claws
Click on the first or last page to see other KV-XA34M60 service manuals if exist.