Sony KV-XA29M67 Service Manual ▷ View online
–
17
–
KV
-XA29M67/XA29M97/XA34M67/XA34M97
-XA29M67/XA29M97/XA34M67/XA34M97
RM-953
22
Adjusting Your Setup (MENU)
How to use the menu
You can use the buttons on the remote
and on the TV as well to display the
menu and adjust the settings.
and on the TV as well to display the
menu and adjust the settings.
1
Press MENU to display the
menu.
menu.
2
Press V or v to select the
desired item.
desired item.
3
Press ENTER to confirm
your selection and go to
the next menu level.
your selection and go to
the next menu level.
Other menu operations
To
Press
Adjust the setting value
V,b,v or B
Move to the next/previous menu level
b or B
Cancel the menu
MENU
Tips
• If you want to exit from Menu Level 2 to Menu Level 1, press V or v until
• If you want to exit from Menu Level 2 to Menu Level 1, press V or v until
the return icon (
) is highlighted, then press ENTER.
• Some of the menu items can be operated directly using the remote
buttons.
• The MENU, ENTER, and SELECT
/
buttons on the TV can also be used
for the operations above.
Notes
• If more than 60 seconds elapse between entries, the menu screen
• If more than 60 seconds elapse between entries, the menu screen
automatically disappears.
PROGR
MENU
AUTO
PROGR
ENTER
SELECT
R
T V
CH PRE S E T
S Y S : B / G
MANUA L PROGRAM
AM
+ + +
O PROG
AU T
V/b/v/B/ENTER
MENU
Front of TV
RAM
T V
MANUA L PROG
S Y S :
MA
N
UA L PRO
B / G
GRAM
AU T
RAM
O PROG
ENTER
ENTER
0
/
FAVORITE
PIP PROGR
PIP PROGR
ENTER
P I C T URE +
+MO
C
P I C T URE
I N T E L L I GEN T P I C : OF F
WI DE MODE : OF F
DE : DYNAM I
Introducing the menu system (continued)
23
Adjusting Your Setup (MENU)
I N T E L L I GEN
P ER
P I C T URE
SONA L
W I DE
SOF T
PICTURE
MODE
MODE
: S T ANDARD
AD J US T
C
DYNAM I
FAVORITE
PIP PROGR
PIP PROGR
ENTER
MENU
Changing the
“PICTURE” setting
“PICTURE” setting
The “PICTURE” menu allows you to
change the picture settings.
change the picture settings.
1
Press MENU.
2
Make sure the “PICTURE”
icon (
icon (
) is selected,
then press ENTER.
3
Press V or v to select the
desired item (e.g.,
“PICTURE MODE” ),
then press ENTER.
desired item (e.g.,
“PICTURE MODE” ),
then press ENTER.
Select
To
“PICTURE MODE”
choose either “DYNAMIC”, “STANDARD”, “SOFT” ,
“PERSONAL”*, or “ADJUST”.
“PERSONAL”*, or “ADJUST”.
“WIDE MODE”
change the picture size when receiving wide-mode (16:9)
picture signal.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
picture signal.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
“INTELLIGENT PIC”
optimize picture quality.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
* When the “PERSONAL” mode is selected, you can receive the last
adjusted picture settings from the “ADJUST” items (see page 24).
Note
• For details on the options under “PICTURE MODE”, see page 13.
• For details on the options under “PICTURE MODE”, see page 13.
To return to the normal screen
Press MENU.
ENTER
ENTER
ENTER
V/b/v/B/ENTER
P I C T URE MO
C
P I C T URE
I N T E L L I GEN T P I C : OF F
W I DE MODE : OF F
DE :
DYNAM I
contiuned
–
18
–
KV
-XA29M67/XA29M97/XA34M67/XA34M97
-XA29M67/XA29M97/XA34M67/XA34M97
RM-953
24
Adjusting Your Setup (MENU)
80
COLOR
Adjusting the “ADJUST” items under “PICTURE MODE”
1
Press V or v to select the
desired item (e.g.,
“COLOR”), then press
ENTER.
desired item (e.g.,
“COLOR”), then press
ENTER.
2
Adjust the value according to the following table, then press ENTER.
For
Press v/B to
Press V/b to
“PICTURE”
decrease picture contrast
increase picture contrast
“COLOR”
decrease color intensity
increase color intensity
“BRIGHT”
darken the picture
brighten the picture
“HUE”*
increase red picture tones
increase green picture tones
“SHARP”
soften the picture
sharpen the picture
* You can adjust “HUE” for the NTSC color system only.
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “PERSONAL”.
Tip
• For details on the menu system and how to use the menu, refer to
• For details on the menu system and how to use the menu, refer to
Introducing the menu system
on page 20.
ENTER
ENTER
Changing the “PICTURE” setting (continued)
25
Adjusting Your Setup (MENU)
FAVORITE
PIP PROGR
PIP PROGR
ENTER
MENU
Changing the
“SOUND” setting
“SOUND” setting
The “SOUND” menu allows you to
change the sound settings.
change the sound settings.
1
Press MENU.
2
Press V or v to select the
“SOUND” icon ( ),
then press ENTER.
“SOUND” icon ( ),
then press ENTER.
3
Press V or v to select the
desired item (e.g.,
“SOUND MODE”),
then press ENTER.
desired item (e.g.,
“SOUND MODE”),
then press ENTER.
Select
To
“SOUND MODE”
choose either “DYNAMIC”, “DRAMA”, “SOFT”,
“PERSONAL”*, or “ADJUST”.
“PERSONAL”*, or “ADJUST”.
“SURROUND”
choose either “TruSurround” or “OFF”.
“INTELLIGENT VOL”
adjust the volume of all program numbers and video inputs
automatically.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
automatically.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
* When the “PERSONAL” mode is selected, you can received the last
adjusted sound settings from the “ADJUST” option (see page 26).
Tip
• For details on the options under “SOUND MODE” and “SURROUND”,
• For details on the options under “SOUND MODE” and “SURROUND”,
see pages 13 and 17 respectively.
To return to the normal screen
Press MENU.
V/b/v/B/ENTER
ENTER
ENTER
SOUND MODE
+
SOUND
I N T E L L I GEN T VO L : OF F
SURROUND : OF F
:
DYNAM I C
+
P ER
SOUND
SONA L
I N T E L L I GEN SOF T
S
S
URROUND : O
OUND MODE
DRAMA
AD J US T
C
DYNAM I
ENTER
ENTER
continued
–
19
–
KV
-XA29M67/XA29M97/XA34M67/XA34M97
-XA29M67/XA29M97/XA34M67/XA34M97
RM-953
26
Adjusting Your Setup (MENU)
Adjusting the “ADJUST” items under “SOUND MODE”
1
Press V or v to select the
desired item
(e.g., ”BALANCE“),
then press ENTER.
desired item
(e.g., ”BALANCE“),
then press ENTER.
2
Adjust the value according to the following table, then press ENTER.
For
Press v/B to
Press V/b to
“BASS”
decrease the bass
increase the bass
“TREBLE”
decrease the treble
increase the treble
“BALANCE”
increase the left speaker’s volume
increase the right speaker’s volume
“BBE”
select “HIGH” for higher enhancement of sound clarity;
select “LOW” for lower enhancement of sound clarity;
select “OFF” to turn off the BBE sound
select “LOW” for lower enhancement of sound clarity;
select “OFF” to turn off the BBE sound
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “PERSONAL”.
Tip
• For details on the menu system and how to use the menu, refer to
• For details on the menu system and how to use the menu, refer to
Introducing the menu system
on page 20.
BALANCE
00
ENTER
ENTER
Changing the “SOUND” setting (continued)
27
Adjusting Your Setup (MENU)
Changing the
“PIP” setting
“PIP” setting
The “PIP” menu allows you to display a
sub screen, change the sub screen
position and exchange pictures between
the main and sub screens.
sub screen, change the sub screen
position and exchange pictures between
the main and sub screens.
1
Press MENU.
2
Press V or v to select the
“PIP” icon (
“PIP” icon (
), then
press ENTER.
3
Press V or v to select the
desired item (e.g., “PIP”),
then press ENTER.
desired item (e.g., “PIP”),
then press ENTER.
P I P
SWA P
P I P : OF F
POS I T I ON :
7
8
0
-/--
9
FAVORITE
SOUND
MODE
SURROUND
PIP PROGR
PIP PROGR
ENTER
MENU
V/b/v/B/ENTER
ENTER
ENTER
ENTER
ENTER
O N
OF F
+
P I P
SWA P
P I P :
POS I T I ON :
Select
To
“POSITION”
change the position of the sub screen.
Press V or v to select the desired position, then press ENTER.
Press V or v to select the desired position, then press ENTER.
“PIP”
display a sub screen within the main picture.
Press V or v to select “ON”, then press ENTER.
To cancel, press
Press V or v to select “ON”, then press ENTER.
To cancel, press
or select “PIP : OFF”, then press ENTER.
“SWAP”
exchange pictures between main screen and sub screen.
To return to the normal screen
Press MENU.
Tip
• For details on the menu system and how to use the menu, refer to
• For details on the menu system and how to use the menu, refer to
Introducing the menu system
on page 20.
–
20
–
KV
-XA29M67/XA29M97/XA34M67/XA34M97
-XA29M67/XA29M97/XA34M67/XA34M97
RM-953
28
Adjusting Your Setup (MENU)
Changing the
“SETUP” setting
“SETUP” setting
The “SETUP” menu allows you to
change the menu language, adjust the
picture position, adjust the program
number setting and select color system.
change the menu language, adjust the
picture position, adjust the program
number setting and select color system.
1
2
3
4
5
6
7
8
0
-/--
9
FAVORITE
PIP PROGR
PIP PROGR
ENTER
MENU
Number buttons
V/b/v/B/ENTER
1
Press MENU.
2
Press V or v to select
“SETUP” icon (
“SETUP” icon (
),
then press ENTER.
3
Press V or v to select
the desired item (e.g.,
“COLOR SYS”), then
press ENTER.
the desired item (e.g.,
“COLOR SYS”), then
press ENTER.
Select
To
“LANGUAGE”
change the menu language (see Changing the menu language
on page 11).
on page 11).
“PIC ROTATION”
adjust the picture position when it is not aligned to the TV screen.
Press V, b, v or B to adjust the picture position, then press ENTER.
Press V, b, v or B to adjust the picture position, then press ENTER.
“PROGRAM SETUP”
adjust each program number settings. (see Adjusting each
program number settings (PROGRAM SETUP)
program number settings (PROGRAM SETUP)
on page 29).
“COLOR SYS”
change the color system. Normally, set this to “AUTO”.
To return to the normal screen
Press MENU.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
E
CO L OR S Y S : AU TO
S E T UP
PROGRAM S E T UP
P I C ROT A T I ON
NG L I SH
L ANGUAGE :
L ANGUAGE : E
CO L OR S Y S : N T S
S E T UP
C 3 . 5 8
PROGRAM S E S ECAM
P I C ROT A T I P A L
AU TO
N T SC 4 . 4 3
29
Adjusting Your Setup (MENU)
Adjusting each program number settings (PROGRAM SETUP)
1
Select “PROGRAM SETUP” from the “SETUP” menu.
2
Select “PR” and press
ENTER. Press V or v to
select the desired
program number you
want to adjust, then
press ENTER.
ENTER. Press V or v to
select the desired
program number you
want to adjust, then
press ENTER.
3
Press V or v to select
the desired item (e.g.,
”CHILD LOCK”), then
press ENTER.
the desired item (e.g.,
”CHILD LOCK”), then
press ENTER.
Select
To
“PR”
select the desired program number.
“SKIP”
skip unwanted or unused program number.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
“CHILD LOCK”
prevent children from watching this selected program number.
Press V or v to select “ON”, then press ENTER.
The lock symbol ( ) appears on the screen.
To cancel, select “OFF”, then press ENTER.
If you preset a locked program number, that program number will
be unlocked automatically.
Press V or v to select “ON”, then press ENTER.
The lock symbol ( ) appears on the screen.
To cancel, select “OFF”, then press ENTER.
If you preset a locked program number, that program number will
be unlocked automatically.
“FAVORITE CH”
program favorite channels for direct selection.
Press V or v to select one of the six favorite channel numbers
(if you decide not to make any changes, select “ ”),
then press ENTER.
To view the selected favorite channel, refer page 14.
Press V or v to select one of the six favorite channel numbers
(if you decide not to make any changes, select “ ”),
then press ENTER.
To view the selected favorite channel, refer page 14.
4
To continue adjusting other program numbers, press V or v to select “PR”,
then repeat step 2 and 3.
then repeat step 2 and 3.
To return to the normal screen
Press MENU.
UP
F A VOR I T E CH : – –
PROGRAM S E T
CH I L D L OCK : OF F
S K I P : OF F
PR :
1 4
ENTER
ENTER
ENTER
ENTER
UP
F A VOR I T E C
: – –
PROGRAM S E T
CH I L D L OCK
:
S K I P : ON
PR : 1 4
O N
OF F
Click on the first or last page to see other KV-XA29M67 service manuals if exist.