DOWNLOAD Sony KV-XA25M80 Service Manual ↓ Size: 10.34 MB | Pages: 106 in PDF or view online for FREE

–

 37 

–

28

Additional Information

If you find any problem while viewing your TV, please check the following guide. If
any problem persists, contact your Sony dealer .

4

10

–

–

–

–

4

11

11

• Connection is loose or

the cable is damaged.

• Channel presetting is

inappropriate or
incomplete.

• The antenna type is

inappropriate.

• The antenna direction

is inappropriate.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The power cord,

antenna or VCR is not
connected.

• The TV is not turned

on.

• Check the antenna cable and connection

on the TV, VCR and on the wall.

• Preset the channel again.

• Check the antenna type (“VHF”/“UHF”).

Contact a Sony dealer for advice.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Try using a booster.

• Turn off or disconnect the booster if it is

in use.

• Check the power cord, antenna and the

VCR connections.

• Press POWER.

• Press POWER on the TV to turn off the TV

for about five seconds, then turn it on
again.

29

Additional Information

•The volume level is too

low.

•The sound is muted.

•Broadcast signal has a

transmission problem.

•There is local

interference from cars,
neon signs, hair dryers,
power generators, etc.

•Broadcast signals are

reflected by nearby
mountains or buildings.

•The antenna direction

is inappropriate.

•Use of a booster is

inappropriate.

•The color level setting

is too low.

•The color system

setting is inappropriate
(for video input only).

•The antenna direction

is inappropriate.

•The magnetic

disturbance from
external speakers or
other equipment, or the
direction of the earth’s
magnetic field may
affect the TV.

•The stereo reception

setting is inappropriate.

• Press VOL + to increase the volume level.

• Press MUTING to cancel the muting.

• Press MTS until a better sound is

heard.

• Do not use a hair dryer or other

equipment near the TV.

• Adjust the antenna direction for

minimum interference. Contact a Sony
dealer for advice.

• Use a highly directional antenna.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Turn off or disconnect the booster if it is

in use.

• Display the “PICTURE” menu and select

“ADJUST” of “PICTURE MODE”, then
adjust the “COLOR” level.

• Display the “SETUP” menu and check

the color system (“COLOR SYS”) setting
(usually set this to “AUTO”).

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Keep external speakers or other electrical

equipment away from the TV. Do not
move the TV while the TV is turned on.
Press POWER on the TV to turn
off the TV for about five minutes, then
turn it on again.

• Press MTS until “STEREO” appears on the

screen.

12

12

17

–

–

–

–

–

21

24

–

–

17

–

 38 

–

30

Additional Information

4

–

17

–

24

27

–

–

The 1 indicator on
your TV flashes red
a number of times
between 3-second
intervals.

• Connection is loose or

the cable is damaged.

• The antenna direction

is inappropriate.

• Broadcast signal has a

transmission problem.

• The magnetic

disturbance from

external speakers or

other equipment, or

the direction of the

earth’s magnetic field

may affect the TV.

• Your TV may need

service.

• Changes in room

temperature

sometimes make the

TV cabinet expand or

contract, making a

noise. This does not

indicate a malfunction.

• The TV’s demagnetizing

function is working.

This does not indicate

a malfunction.

• Check the antenna cable and connection

on the TV, VCR and on the wall.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

• Press MTS until a better sound is

heard.

• Keep external speakers or other electrical

equipment away from the TV.

• Display the “SETUP” menu and adjust

“PIC ROTATION” until the picture is

optimal.

• Contact your nearest Sony service center.

—

—

31

Additional Information

AUTO PROGR
POWER

CHANNEL +/–

STANDBY
VOLUME +/–
TV/VIDEO
WAKE UP
STEREO
Menu operations

MENU
SELECT 

/

RETURN

i

L

(MONO)

VIDEO

S VIDEO

VIDEO 3 INPUT

R

AUDIO

CHANNEL

MENU

VOLUME

TV/VIDEO

AUTO

PROGR

STANDBY/

STEREO/

WAKE UP

RETURN

SELECT

POWER

L(MONO)

VIDEO

S VIDEO

VIDEO 3 INPUT

R

AUDIO

CHANNEL

MENU

VOLUME

TV/VIDEO

AUTO
PROGR

RETURN

SELECT

POWER

Preset channels automatically.

5

Turn off completely or

11

turn on the TV.
Select channel number.

11

Standby indicator

11

Adjust volume.

12

Select TV or video input.

12

Wake Up indicator

13

Stereo/bilingual indicator.

17

Display the menu.

19

Select and adjust items.

19

Confirm selected items.

19

Headphone jack.

–

–

 39 

–

32

Additional Information

5

5

10

10

10

11

11

12

12

12

12

12

12

13

13

14

14

15

15

16

17

19

19

19

AUTO PROGRAM

CABLE

ADD/ERASE

0 – 9

ENTER

POWER

CH +/–

VOL +/–

VIDEO

TV

MUTING

DISPLAY

JUMP

Timer operation

WAKE UP

SLEEP

PIC MODE

SOUND MODE

Favorite Channel operations

FAVORITE

1 – 6

SURROUND

Stereo/bilingual operations

MTS

Menu operations

MENU

+, –

RETURN

Preset channels automatically.

Receive cable TV programs.

Preset channels manually.

Input numbers.

Confirm input number.

Turn off temporarily or turn on
the TV.

Select channel number.

Adjust volume.

Select TV or video input.

Display the TV program.

Mute the sound.

Display on-screen information.

Jump to previous channel
number.

Set TV to turn on automatically.

Set TV to turn off automatically.

Select picture mode.

Select sound mode.

Display favorite channels.

Select desired channel.

Select surround mode.

Select stereo/bilingual mode.

Display the menu.

Select and adjust items.

Confirm selected items.

– 40 –

1

 Two screws

(+BVTP 4 

× 16)

2

 Two screws washer head

(+P 4 

× 16)

2 Two screws
     (+BVTP 3 

× 12)

3 F Board bracket

5 Two claws

1 Three connectors

4 F board

2 Three screws
     (+BVTP 4 

× 16)

1 Eight screws
     (+BVTP 4 

× 16)

3 Rear Cover

1 3D Speaker box assy
    (KV-XA25M83 ONLY)

Black wire

Red wire

Note:
1. Disconnect the speaker connection on the right side.
2. Undress necessary wires that creates tension while

placing the chassis into Service Position.