DOWNLOAD Sony KV-XA25M31 Service Manual ↓ Size: 5.64 MB | Pages: 127 in PDF or view online for FREE

–

 29 

–

6

Using Your New TV

Place the TWEETER on top of your TV.

Bend the wire to hook it at the rear of your TV.

Connect the wires to the TWEETER terminals at the rear of your TV. The
plain wire should be connected to the 3 red terminal and the striped wire
to the # black terminal.

Notes
• Connect only the supplied TWEETER; otherwise your TV may

malfunction.

• Unplug your TV from the wall outlet when connecting the TWEETER.
• To prevent a malfunction caused by a short circuit of the terminals, make

sure that none of the TWEETER wire strands stick out, making contact
with the neighbouring speaker terminal.

You can enjoy high quality sound by connecting the TWEETER.

TWEETER

R

L

R

L

7

Using Your New TV

You can connect optional audio/video components, such as a VCR, multi disc player,
DVD, camcorder, video game or stereo system. To watch the picture of the connected
equipment, press t (see page 11).

Connecting a camcorder/video game equipment
using the t (video input) jacks

Notes
• You can also connect video equipment to the t 1, 2 or 3 (video input)

jacks at the rear of your TV.

• If both 

 (S video input) and t 3 (video input) at the front of your TV

are input at the same time, the 

 (S video input) is automatically

selected. To view the video input to t 3 (video input), disconnect the
S video cable.

• Do not connect video equipment to the t 3 (video input) jacks at the

front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.

Connecting audio/video equipment using the T
(monitor output) jacks

Note
• If you select “DVD” on your TV screen, no signal will be output at the T

(monitor output) jacks (see page 11).

t

To T
(monitor
output)

PROGR

MENU

AUTO
PROGR

ENTER

SELECT

L(MONO)

3

L (MONO)

R

3

–

 30 

–

8

Using Your New TV

• Some DVD player terminals may be labeled differently:

• Since the high quality pictures on a DVD disc contain a lot of information,

picture noise may appear. In this case, adjust the sharpness (“SHARP”) in the
“ADJUST” menu of the “PICTURE MODE” menu (see page 24).

• Connect your DVD player directly to your TV. Connecting the DVD player

through other video equipment will cause unwanted picture noise.

1 Connect R and L under 

 (component video input) on your TV to the LINE OUT,

AUDIO R and L output connectors on your DVD player.

2 Using a component video cable, connect Y, C

B

, and C

R

 under 

 (component video

input) on your TV to the COMPONENT VIDEO OUT Y, C

B

, and C

R

 output

connectors on your DVD player.

Y (green)

Y

C

B

 (blue)

C

b

, B-Y or P

B

C

R

 (red)

C

r

, R-Y or P

R

VIDEO 

R-AUDIO-L

LINE  OUT

Y 

COMPONENT VIDEO OUT

S VIDEO OUT

C

B

 

C

R

 

Connecting a DVD player using the t (video input) jacks

VIDEO 

R-AUDIO-L

LINE  OUT

 (yellow)

To t 1, 2, or 3
(video input)

9

Using Your New TV

To prevent the TV from falling, secure the TV using one of the following methods:

A

With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.

B

Put the cord or chain through the clamps to secure the TV against a wall or
pillar.

Note
• Use only the supplied screws. Use of other screws may damage the TV.

A

B

–

 31 

–

10

Using Your New TV

This section explains various functions
and operations available while watching
the TV. Most operations can be done
using the remote.

Press 

!

 to turn on the TV.

When the TV is in the
standby mode (the 

1

indicator on the TV is lit
red), press 

?/1

 on the

remote or PROGR +/– on
the TV.

Press PROGR +/– or
number buttons to select
the program number.

For double digit numbers,
press 

-

, then the number

(e.g., for 25, press 

-

,  then

2 and 5).

(1) Press and hold PROGR +/–.
(2) Release PROGR +/– when the desired program number appears.

Note
• When you select a program number quickly, the picture may be disrupted.

This does not indicate a malfunction.

%

?/1

t

a

2

V/b/v/B/ENTER

PROGR

MENU

AUTO

PROGR

ENTER

SELECT

L(MONO)

R

4

PROGR

MENU

AUTO
PROGR

ENTER

SELECT

11

Using Your New TV

Turn off temporarily

Turn off completely

Adjust the volume

Mute the sound

Watch the video input
(VCR, camcorder, etc.)

Jump back to the previous program
number

Display the on-screen information*

?/1

. The 1 indicator on the TV lights up red.

!

 on the TV.

2

 +/–.

%

.

t to select “VIDEO 1”, “VIDEO 2” , “VIDEO 3”or
“DVD”. To return to the TV program, press a.

JUMP.

.

ENTER

ENTER

ENTER

ENTER

ENTER

P I C T URE +

+MO

C

P I C T URE

I N T E L L I GEN T P I C : OF F

WI DE MODE : OF F

DE : DYNAM I

E

CO L OR S Y S : AU TO

S E T UP

PROGRAM S E T UP

P I C ROT A T I ON

NG L I SH

L ANGUAGE :

* The picture, sound, and either the program number or video input are

displayed. The on-screen display for the picture and sound information
disappears after about three  seconds.

You can change the menu language as well as the on-screen language.

For details on how to use the menu, see Introducing the menu system on page 20.

Press MENU.

Press V or v to select the
“SETUP” icon (

),

then press ENTER.

Make sure “LANGUAGE”
is selected, then press
ENTER.

Press V or v to select the
desired language (e.g.,
“

”), then press

ENTER.

The selected menu language appears.

Press MENU.

L ANGUAGE :

CO L OR S Y S :

S E T UP

PROGRAM S E

P I C ROT A T I

ENG L I SH

– 32 –

12

Using Your New TV

Press   until the desired
period of time appears.

The Wake Up timer starts
immediately after you
have set it.

Select the program number or video input you want to display when you
wake up.

Press 1 or set the Sleep timer if you want the TV to turn off automatically.

The   indicator lights up orange.

Press   until “WAKE UP TIMER: OFF” appears or turn off the TV’s
main power.

Note
• If no buttons or controls are pressed for more than two hours after the TV

is turned on using the Wake Up timer, the TV automatically goes into the
standby mode. To continue watching the TV, press any button or control
on the TV or the remote.

Press     until the desired
period of time appears.

The Sleep timer starts
immediately after you
have set it.

Press 

until “SLEEP TIMER:  OFF” appears or turn the TV off.

13

Advanced Operations

You can select picture and sound modes
and adjust the setting to your preference
in “PERSONAL” option.

Press PIC MODE
repeatedly until you get
the desired picture mode.

“DYNAMIC”

receive high contrast pictures.

“STANDARD”

receive normal contrast pictures.

“SOFT”

receive mild pictures.

“PERSONAL”

receive the last adjusted picture setting from the “ADJUST”
option in the “PICTURE” menu (see page 23).

Press SOUND MODE
repeatedly until you get
the desired sound mode.

“DYNAMIC”

listen to dynamic and clear sound that emphasizes the low and
high tones.

“DRAMA”

listen to sound that emphasizes voice and high tones.

“SOFT”

receive soft sound.

“PERSONAL ”

receive the last adjusted sound setting from the “ADJUST”
option in the “SOUND” menu (see page 25).

Tip
• You can also set the picture and sound modes using the menu (see

 on page 23 and Changing the

 on page 25).

≥

≥

≥

≥