Sony KV-XA25M31 Service Manual ▷ View online
–
13
–
KV
-XA25M61/XA25
-XA25M61/XA25
M31/XA25M90/XA25M80/XA25M50
RM-954
KV
-XA25M87/XA25M84/XA25M86
-XA25M87/XA25M84/XA25M86
RM-953
11
Using Your New TV
Using Y
our New TV
Setting the Wake Up timer
1
Press
until the desired
period of time appears.
The Wake Up timer starts
immediately after you
have set it.
immediately after you
have set it.
2
Select the program number or video input you want to display when you
wake up.
wake up.
3
Press 1 or set the Sleep timer if you want the TV to turn off automatically.
The
indicator on the TV lights up orange.
To cancel the Wake Up timer
Press
until “WAKE UP TIMER: OFF” appears or turn off the
TV’s main power.
Note
• If no buttons or controls are pressed for more than two hours after the TV
• If no buttons or controls are pressed for more than two hours after the TV
is turned on using the Wake Up timer, the TV automatically goes into the
standby mode. To continue watching the TV, press any button or control
on the TV or the remote.
standby mode. To continue watching the TV, press any button or control
on the TV or the remote.
Setting the Sleep timer
Press
until the desired
period of time appears.
The Sleep timer starts
immediately after you
have set it.
immediately after you
have set it.
To cancel the Sleep timer
Press
until “SLEEP TIMER: OFF” appears or turn the TV off.
WAKE UP TIMER:10M
WAKE UP TIMER:OFF
WAKE UP TIMER:12H00M
After 10 minutes
No Wake Up Timer
After 12 hours
SLEEP TIMER:30M
SLEEP TIMER:60M
SLEEP TIMER:OFF
SLEEP TIMER:90M
After 30 minutes
No Sleep Timer
After 60 minutes
After 90 minutes
12
Advanced Operations
Advanced Operations
SOUND MODE
Selecting the
picture and sound
modes
picture and sound
modes
You can select picture and sound modes
and adjust the setting to your preference
in “PERSONAL” option.
and adjust the setting to your preference
in “PERSONAL” option.
Selecting the picture mode
Press PIC MODE
repeatedly until you get
the desired picture mode.
repeatedly until you get
the desired picture mode.
Select
To
“DYNAMIC”
receive high contrast pictures.
“STANDARD”
receive normal contrast pictures.
“SOFT”
receive mild pictures.
“PERSONAL”
receive the last adjusted picture setting from the “ADJUST”
option in the “PICTURE” menu (see page 21).
option in the “PICTURE” menu (see page 21).
Selecting the sound mode
Press SOUND MODE
repeatedly until you get
the desired sound mode.
repeatedly until you get
the desired sound mode.
Select
To
“DYNAMIC”
listen to dynamic and clear sound that emphasizes the low and
high tones.
high tones.
“DRAMA”
listen to sound that emphasizes voice and high tones.
“SOFT”
receive soft sound.
“PERSONAL”
receive the last adjusted sound setting from the “ADJUST”
option in the “SOUND” menu (see page 23).
option in the “SOUND” menu (see page 23).
Tip
• You can also set the picture and sound modes using the menu (see
• You can also set the picture and sound modes using the menu (see
Changing the “PICTURE” setting
on page 21 and Changing the
“SOUND” setting
on page 23).
PIC MODE
PERSONAL
SOFT
STANDARD
DYNAMIC
≥
DYNAMIC
≥
DRAMA
≥
SOFT
≥
PERSONAL
FAVORITE
SOUND
MODE
PIC MODE
ENTER
MENU
A/B
SURROUND
PIC MODE
SOUND
MODE
–
14
–
KV
-XA25M61/XA25
-XA25M61/XA25
M31/XA25M90/XA25M80/XA25M50
RM-954
KV
-XA25M87/XA25M84/XA25M86
-XA25M87/XA25M84/XA25M86
RM-953
13
Advanced Operations
1
Press FAVORITE.
2
Press the number button
from 1 to 6 to select the
desired favorite channel.
from 1 to 6 to select the
desired favorite channel.
Tip
• To program your favorite channels, see Adjusting each program number
• To program your favorite channels, see Adjusting each program number
settings (PROGRAM SETUP)
on page 26.
Viewing your
favorite channels
favorite channels
You can display and select six of your
favorite channels directly from your TV
screen.
favorite channels directly from your TV
screen.
Number
buttons
buttons
FAVORITE
1
4
7
-/--
2
5
8
0
3
6
9
FAVORITE
SOUND
MODE
PIC MODE
ENTER
MENU
A/B
SURROUND
FAVORITE
1
1
2
3
4
5
6
Advanced Operations
14
Advanced Operations
Press SURROUND
repeatedly until you
receive the desired
surround sound.
repeatedly until you
receive the desired
surround sound.
Listening with
surround sound
surround sound
The surround feature enables you to
enjoy the sound effects of a concert hall
or movie theater.
enjoy the sound effects of a concert hall
or movie theater.
Select
To
“TruSurround”
listen to the surround sound that spreads out to the rear of a room.
“OFF”
turn off the surround sound.
Tip
• You can also select the surround option using the menu (see Changing the
• You can also select the surround option using the menu (see Changing the
“SOUND” setting
on page 23).
The surround of your TV is categorized as TruSurround.
TM
is a trademark of SRS Labs, Inc. SRS and the SRS symbol are
registered trademarks of SRS Labs, Inc. in the United States and selected foreign
countries. SRS and TruSurround are incorporated under license from SRS Labs,
Inc. and are protected under United States Patent Nos. 4,748,669 and 4,841,572
with numerous additional issued and pending foreign patents.
countries. SRS and TruSurround are incorporated under license from SRS Labs,
Inc. and are protected under United States Patent Nos. 4,748,669 and 4,841,572
with numerous additional issued and pending foreign patents.
SURROUND
FAVORITE
SOUND
MODE
PIC MODE
ENTER
MENU
A/B
SURROUND
SURROUND: OFF
SURROUND: TruSurround
SURROUND
–
15
–
KV
-XA25M61/XA25
-XA25M61/XA25
M31/XA25M90/XA25M80/XA25M50
RM-954
KV
-XA25M87/XA25M84/XA25M86
-XA25M87/XA25M84/XA25M86
RM-953
16
Advanced Operations
When receiving an A2 program
Receiving area for NICAM and A2 programs
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select
“MONO”. The sound becomes monaural, but the noise is reduced.
If the sound is distorted when receiving a monaural program
through the 8 (antenna) terminal
through the 8 (antenna) terminal
Press A/B repeatedly until “MONO” appears on the screen.
To cancel the monaural sound setting, press A/B again until
“AUTO” appears on the screen.
“AUTO” appears on the screen.
Notes
• The “MONO” or “AUTO” setting is memorized for each program
• The “MONO” or “AUTO” setting is memorized for each program
number.
• You cannot receive stereo broadcast signal when the TV is in the “MONO”
setting. Normally set the TV to “AUTO”.
Broadcasting
On-screen display (Selected sound)
A2 stereo
A2 bilingual
System
NICAM
A2
Receiving area
Hong Kong, Singapore, New Zealand, Malaysia,
Thailand, etc.
Thailand, etc.
Australia, Malaysia, Thailand, etc.
STEREO
MONO
(Stereo sound)
(Regular sound)
MAIN
SUB
(Main sound)
(Sub sound)
MONO
AUTO
Enjoying stereo or bilingual programs (continued)
15
Advanced Operations
Broadcasting
On-screen display (Selected sound)
NICAM stereo
NICAM bilingual
NICAM monaural
Enjoying stereo or
bilingual
programs
bilingual
programs
You can enjoy stereo sound or bilingual
programs of NICAM and A2 stereo
systems.
programs of NICAM and A2 stereo
systems.
Press A/B repeatedly until you
receive the sound you want.
receive the sound you want.
The on-screen display changes
to show the selected sound.
The
to show the selected sound.
The
indicator on the TV
lights up red when receiving
any stereo or bilingual
program.
any stereo or bilingual
program.
When receiving a NICAM program
A/B
-/--
0
FAVORITE
SOUND
MODE
PIC MODE
ENTER
MENU
A/B
SURROUND
NICAM
MONO
(Stereo sound)
(Regular sound)
NICAM
MAIN
MONO
(Main sound)
(Regular sound)
NICAM
SUB
(Sub sound)
NICAM
MAIN
MONO
(Main sound)
(Regular sound)
NICAM
PROGR
MENU
AUTO
PROGR
PROGR
ENTER
SELECT
L(MONO)
3
indicator
continued
(Except KV-XA25M50/XA25M80)
–
16
–
KV
-XA25M61/XA25
-XA25M61/XA25
M31/XA25M90/XA25M80/XA25M50
RM-954
KV
-XA25M87/XA25M84/XA25M86
-XA25M87/XA25M84/XA25M86
RM-953
17
Advanced Operations
Viewing Teletext
TV stations broadcast an information
service called Teletext via some TV
channels. Teletext allows you to receive
various information, such as shares
market or news.
service called Teletext via some TV
channels. Teletext allows you to receive
various information, such as shares
market or news.
Displaying Teletext
1
Select a TV channel that carries the Teletext broadcast you want to watch.
2
Press
to display the
text.
A Teletext page (normally
the index page) is
displayed. If there is no
Teletext broadcast, “100” is
displayed at the top left
corner of the screen.
the index page) is
displayed. If there is no
Teletext broadcast, “100” is
displayed at the top left
corner of the screen.
To turn off Teletext
Press
a
.
t
a
A/B
b
P166 SECTEXT 166 FR1 MAR 03:59:09
From Singapore
To PARIS
To OSAKA
To ROMA
To SYDNEY
Day Dep/Arr Flight Alrcraft
1.6 220/0588 SQ28 747
2 2130/1225 PA115 L15
3 2115/1330 SQ26 747
3 2115/1330 SQ26 747
2.7 2130/0745 SQ24 747
4 2300/0915 AZ487 747
4 2300/0915 AZ487 747
2.5 1000/1715 SQ6 747
4.6 0930/2015 CX522 L10
4.6 0930/2015 CX522 L10
1 2210/0610 SQ21A 747
2 2100/0835 SQ21A 747
2 2100/0835 SQ21A 747
1
4
7
-/--
2
5
8
0
3
6
9
FAVORITE
SOUND
MODE
PIC MODE
ENTER
MENU
A/B
SURROUND
?/1
continued
(Except KV-XA25M90/XA25M80)
18
Advanced Operations
Additional Teletext tasks
To
display a Teletext page on the TV
picture
picture
check the contents of a Teletext service
select a Teletext page
hold (pause) a Teletext display
reveal concealed information
(e.g., an answer to a quiz)
(e.g., an answer to a quiz)
enlarge the Teletext display
wait for a Teletext page while watching
a TV program
a TV program
* You can also select a Teletext page that appears in the colored columns at
the bottom of the screen using the corresponding color-coded buttons on
the remote.
the remote.
Using FASTEXT
This feature allows you to quickly access a Teletext page that uses
FASTEXT. When a FASTEXT program is broadcasted, the colored
menus appear at the bottom of the screen. The colors of the menus
correspond to the red, green, yellow, and blue color-coded buttons
on the remote.
FASTEXT. When a FASTEXT program is broadcasted, the colored
menus appear at the bottom of the screen. The colors of the menus
correspond to the red, green, yellow, and blue color-coded buttons
on the remote.
To access a FASTEXT menu
Press the color-coded button on the remote corresponding to the
menu you want. The menu page appears on the screen after several
seconds.
menu you want. The menu page appears on the screen after several
seconds.
Do this
Press
.
Each time you press
, the screen changes as
follows: Teletext n Teletext and TV n TV.
Press
.
An overview of the Teletext contents and page
numbers appear on the screen.
numbers appear on the screen.
Press the number buttons to enter the three-digit
page number of the desired Teletext page.* If you
make a mistake, reenter the correct page number. To
access the next or previous page, press PROGR +/–.
page number of the desired Teletext page.* If you
make a mistake, reenter the correct page number. To
access the next or previous page, press PROGR +/–.
Press
to display the symbol “j” at the top left
corner of the screen. To resume normal Teletext
operation, press
operation, press
or
.
Press
.
To conceal the information, press the button again.
Press
.
Each time you press
, the Teletext display
changes as follows: Enlarge upper half n Enlarge
lower half n Normal size.
lower half n Normal size.
1 Enter the Teletext page number that you want to
refer to, then press
.
2 When the page number is displayed, press
to
show the text.
Viewing Teletext (continued)
Click on the first or last page to see other KV-XA25M31 service manuals if exist.