DOWNLOAD Sony KV-XA21M83 Service Manual ↓ Size: 8.79 MB | Pages: 90 in PDF or view online for FREE

–

 9 
–

Using Your New TV

5

Note
• Do not use old batteries nor use different types of batteries together.

Notes
• If you connect a monaural VCR, connect the yellow plug to 

 (the

yellow jack) and the black plug to  -L (MONO) (the white jack).

• If you connect a VCR  to the 8 (antenna) terminal, preset the signal

output from the VCR to the program number 0 on the TV.

• When no signal is input from the connected video equipment, the TV

screen becomes blue.

CAUTION
• Do not connect the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries

from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.

Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 10).

Note (except KV-XA21P80/XA51M61)
• During automatic channel presetting, your TV screen will indicate

“B/G” , “I”, “D/K” or “M” for the TV system.

AUTO

PROGR

1

VHF  LOW   B/G

2

L(MONO)

R

PROGR

SELECT

AUTO
PROGR

!

Using Your New TV

6

You can enjoy high quality sound by connecting the 3D WOOFER.

Align the front of the 3D WOOFER to corners A and B of your TV. Place the
3D WOOFER into the footholds and adjust it until it is stable.

Connect the wires to the 3D WOOFER (8

Ω) terminals at the rear of your TV.

The red wire should be connected to the 3 red terminal and the black wire
to the # black terminal.

Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may

malfunction.

• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make

sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring 3D WOOFER terminal.

–

 10 

–

Using Your New TV

7

You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.

To watch the video input of the connected equipment, press t (see page 13).

Connecting a camcorder/video game equipment
using the t (video input) jacks

Note
• You can also connect video equipment to the t 1 (video input) jack at

the rear of your TV.

Connecting audio/video equipment using the T
(monitor output) jacks

Note
• If you connect a monaural VCR, connect the yellow plug to 

 (the yellow

jack) and the black plug to  -L (MONO) (the white jack).

To T
(monitor output)

L(MONO)

R

1

t

L(MONO)

R

2

L(MONO)

R

PROGR

SELECT

AUTO
PROGR

2

Using Your New TV

8

To prevent the TV from falling, secure the TV using one of the following methods:

A

With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.

B

Put the cord or chain through the clamps to secure the TV against a wall or
pillar.

Note
• Use only the supplied screws. Use of other screws may damage the TV.

A

B

–

 11 

–

Using Your New TV

9

You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.

Press ! to turn on the TV.

Press AUTO PROGR.

Note (except KV-XA21P80/XA51M61)
• During automatic channel presetting, your TV screen will indicate “B/G” ,

“I”, “D/K” or “M” for the TV system.

(1) Press SELECT until “AUTO PROGRAM” appears.

(2) Press + or –.

The on-screen display will start flashing.

(3) Press PROGR +/– or the number buttons until the desired program number

appears.

(4) Press + or –.

~

/1

2

TV

1

2

3

4

6

7

8

9

-

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

2

!

AUTO

PROGR

2

L(MONO)

R

PROGR

SELECT

AUTO
PROGR

AUTO

PROGR

!

Using Your New TV

10

Press SELECT until
“MANUAL PROGRAM”
appears.

Press + or –.

Press PROGR +/– or the
number buttons until the
desired program number
appears.

Press + or – until the
desired channel picture
appears.

Press SELECT.

Note (except KV-XA21P80)
• If you preset a locked program number, that particular program number

will be unlock automatically (see page 18).

If the picture or sound is abnormal when receiving programs through the 8 (antenna)
terminal

(1) Press SELECT until “TV SYS” appears.

(2) Press + or – to select the appropriate

TV system until the picture or sound
quality is optimal.

SELECT

PROGR

SELECT

–

 12 

–

Using Your New TV

11

If the color is abnormal when receiving programs through the 8 (antenna) terminal
or the t (video input) jack.

(1) Press SELECT until “COLOR SYS” appears.

(2) Press + or – to select the appropriate

color system until the color is
optimal.

Tip
• Normally set “COLOR SYS” to “AUTO”.

Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.

Press SELECT until “MANUAL PROGRAM” appears.

Press + or –.

Press PIC MODE.

Press SELECT.

Preset the channel automatically or manually.

Tip
• You can also use SELECT and 

2

 +/– on the TV to preset channels and

skip program numbers.

The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control once.
(4) Press 

 to display “FINE” on the screen.

(5) Press + or – continuously until the above problems are minimized.

The + or – icon on the screen flashes while tuning.

(6) Press SELECT to return to normal screen.

Using Your New TV

12

This section explains functions used
while watching the TV. Most operations
can be done using the remote.

Press ! to turn on the TV.

When the TV is in the
standby mode (the 1
indicator on the TV is lit
red), press 

?/

1

 on the

remote or PROGR +/– on
the TV.

Press PROGR +/– or the
number buttons to select
the program number.

For double digit numbers,
press -, then the number
(e.g., for 25, press -,  then
2 and 5).

Press 2 +/– to adjust the
volume.

 1

%

?/

1

t

a

2

2

L(MONO)

R

PROGR

SELECT

AUTO
PROGR

PROGR

SELECT

AUTO

PROGR

!

TV

1

2

3

4

6

7

8

9

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

-

2

!

PROGR