Sony KV-XA21M83 Service Manual ▷ View online
– 25 –
KV
-XA21M83/XA21M93/XA51M61/XA21P80
-XA21M83/XA21M93/XA51M61/XA21P80
RM-952
KV
-XA21N93
-XA21N93
RM-915
SECTION 2-2
GENERAL
(KV-XA21N93)
The operating instruction mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
2
WARNING
• Dangerously high voltages are present inside the TV.
• Operate the TV only between 110-240 V AC.
To prevent fire or shock hazard, do not expose
the TV to rain or moisture.
the TV to rain or moisture.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
falls into it. Have it checked immediately by
qualified personnel only.
Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are
present inside the TV. Refer servicing and
disposal of the TV to qualified personnel.
TV as high voltages and other hazards are
present inside the TV. Refer servicing and
disposal of the TV to qualified personnel.
Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may
be subject to excessive dust, heat, moisture or
vibrations.
Do not use the TV in any vehicle or where it may
be subject to excessive dust, heat, moisture or
vibrations.
Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
For children’s safety, do not leave children
alone with the TV. Do not allow children to
climb onto it.
alone with the TV. Do not allow children to
climb onto it.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
power socket. Do not damage the power cord.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.
TV, the power cord and the antenna cable during
lightning storms.
Pull the power cord out by the plug. Do not pull
the power cord itself. Disconnect the TV before
moving it or if you are not going to use it for
several days.
the power cord itself. Disconnect the TV before
moving it or if you are not going to use it for
several days.
Using Your New TV
4
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R
L
1
L(MONO)
R
VIDEO
IN
MONITOR
OUT
AUDIO
VIDEO
Using Your New TV
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the Connecting a VCR diagram below.
Using Your New TV
F connector
(not supplied)
(not supplied)
Rear of TV
Connecting a VCR
To watch the video input, press VIDEO (see page 12).
: Signal flow
or
Antenna cable (not supplied)
Antenna cable (not supplied)
VIDEO (yellow)
AUDIO-L (MONO) (white)
AUDIO-R (red)
AUDIO-L (MONO) (white)
AUDIO-R (red)
To video
and audio
outputs
and audio
outputs
Audio/Video cable
(not supplied)
To 8
(antenna)
(antenna)
To antenna
output
output
: Signal flow
VCR
To VIDEO IN 1
Rear of TV
Antenna cable
(not supplied)
–
26
–
KV
-XA21M83/XA21M93/XA51M61/XA21P80
-XA21M83/XA21M93/XA51M61/XA21P80
RM-952
KV
-XA21N93
-XA21N93
RM-915
Using Your New TV
5
Using Y
our New TV
Front of TV
Notes
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
PAL, NTSC and SECAM video signals when using VIDEO IN 1 jacks at
the rear of your TV or the VIDEO 2 INPUT at the front of your TV.
the rear of your TV or the VIDEO 2 INPUT at the front of your TV.
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
yellow jack) and the black plug to AUDIO-L (MONO) (the white jack).
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
CAUTION
• Do not connect the power cord until you have completed making all other
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Step 3
Preset the channels automatically
Tips
• If you want to stop automatic channel presetting, press SELECT.
• If your TV has preset an unwanted channel or cannot preset a particular
• If you want to stop automatic channel presetting, press SELECT.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 10).
• The AUTO PROGRAM button on the remote works as the AUTO
PROGR button on the TV.
AUTO
PROGR
1
1
2
3
1
2
3
CABLE: ON
AUTO PROGRAM
SLEEP
CABLE
AUTO
PROGRAM
ADD/
ERASE
PIC MODE
POWER
CHANNEL
POWER
STANDBY/
STEREO/
WAKE UP
STEREO/
WAKE UP
SELECT
VIDEO INPUT
VOLUME
AUTO
PROGR
PROGR
R
VIDEO 2 INPUT
VIDEO L (MONO)
AUDIO
Step 2
Note
• Do not use old batteries nor use different types of batteries together.
• Do not use old batteries nor use different types of batteries together.
Insert the batteries
into the remote
into the remote
Using Your New TV
6
Connecting the 3D WOOFER
You can enjoy high quality sound by connecting the 3D WOOFER.
1
Align the front of the 3D WOOFER to corners A and B of your TV. Place the
3D WOOFER into the footholds and adjust it until it is stable.
3D WOOFER into the footholds and adjust it until it is stable.
2
Connect the wires to the 3D WOOFER (8
Ω) terminals at the rear of your TV.
The red wire should be connected to the 3 red terminal and the black wire
to the # black terminal.
to the # black terminal.
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may
• Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make
• To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring 3D WOOFER terminal.
with the neighbouring 3D WOOFER terminal.
Black
wire
wire
Red
wire
wire
WOOFER (8 )
– +
WOOFER (8 )
– +
3D WOOFER
1
2
Corner A
Corner B
–
27
–
KV
-XA21M83/XA21M93/XA51M61/XA21P80
-XA21M83/XA21M93/XA51M61/XA21P80
RM-952
KV
-XA21N93
-XA21N93
RM-915
Using Your New TV
7
Using Y
our New TV
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.
camcorder, video game or stereo system.
To watch the video input of the connected equipment, press VIDEO (see page 12).
Connecting a camcorder/video game equipment
using the video input jacks
using the video input jacks
Notes
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
PAL, NTSC and SECAM video signals when using VIDEO IN 1 jacks at
the rear of your TV or the VIDEO 2 INPUT at the front of your TV.
the rear of your TV or the VIDEO 2 INPUT at the front of your TV.
• You can also connect video equipment to the VIDEO IN 1 jacks at the rear
of your TV.
Connecting audio/video equipment using the
MONITOR OUT jacks
MONITOR OUT jacks
Note
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
yellow jack) and the black plug to AUDIO-L (MONO) (the white jack).
Front of TV
Camcorder
Video game
equipment
equipment
To video and
audio outputs
audio outputs
: Signal flow
To VIDEO 2 INPUT
or
Audio/Video cable (not supplied)
VIDEO (yellow)
AUDIO-L (MONO) (white)
AUDIO-R (red)
AUDIO-L (MONO) (white)
AUDIO-R (red)
Rear of TV
To
antenna
output
antenna
output
To video and
audio inputs
audio inputs
or
Audio system
To
audio
inputs
audio
inputs
VCR
: Signal flow
Antenna cable (not supplied)
Audio/Video cable (not supplied)
L(MONO)
R
VIDEO
IN
MONITOR
OUT
AUDIO
VIDEO
1
To
MONITOR
OUT
MONITOR
OUT
R
VIDEO 2 INPUT
VIDEO
L
(MONO)
AUDIO
CHANNEL
POWER
STANDBY/
STEREO/
WAKE UP
STEREO/
WAKE UP
SELECT
VIDEO INPUT
VOLUME
AUTO
PROGR
PROGR
R
VIDEO 2 INPUT
VIDEO L (MONO)
AUDIO
Using Your New TV
8
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
A
With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.
the TV using the provided hole.
or
B
Put the cord or chain through the clamps to secure the TV against a wall or
pillar.
pillar.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
• Use only the supplied screws. Use of other screws may damage the TV.
20
mm
mm
3.8 mm
or
A
B
–
28
–
KV
-XA21M83/XA21M93/XA51M61/XA21P80
-XA21M83/XA21M93/XA51M61/XA21P80
RM-952
KV
-XA21N93
-XA21N93
RM-915
9
Using Your New TV
Using Y
our New TV
Presetting
channels
channels
You can preset cable TV, VHF or UHF
broadcast channels using the remote and
the buttons on your TV as well.
broadcast channels using the remote and
the buttons on your TV as well.
Presetting channels automatically
1
Press POWER on the TV to
turn on the TV.
turn on the TV.
2
Press CABLE to select
“CABLE: ON”.
“CABLE: ON”.
3
Press AUTO PROGRAM.
Notes
•
•
If you select “CABLE: ON”, you will be able to receive 125 cable TV
channels.
If there are no cable TV channels, you will receive VHF broadcast
channels only.
channels.
If there are no cable TV channels, you will receive VHF broadcast
channels only.
•
If you select “CABLE: OFF”, you will be able to receive 68 VHF or UHF
broadcast channels only.
broadcast channels only.
TV
1
2
3
4
6
7
8
9
0
5
POWER
TV
DISPLAY
VIDEO
MUTING
MTS
SOUND
MODE
FAVORITE
WAKE UP
SLEEP
CABLE
AUTO
PROGRAM
ADD/
ERASE
JUMP
ENT
CH
VOL
SELECT
PIC MODE
CABLE
AUTO
PROGRAM
1
2
3
AUTO
PROGRAM
PROGRAM
CABLE: ON
CABLE
AUTO
PROGR
POWER
CHANNEL
POWER
STANDBY/
STEREO/
WAKE UP
SELECT
VIDEO INPUT
VOLUME
AUTO
PROGR
PROGR
R
VIDEO 2 INPUT
VIDEO L (MONO)
AUDIO
POWER
continued
10
Using Your New TV
Presetting the channels
manually
manually
To receive a new channel or a channel with a weak signal, preset the channel
manually.
manually.
1
Press number buttons to select the desired channel number, then press ENT.
2
Press ADD/ERASE.
“+” appears beside the
channel number, indicating
that presetting is complete.
channel number, indicating
that presetting is complete.
Disabling channel numbers
By disabling unused or unwanted channel numbers, you can skip those channel
numbers when you press CH +/–.
numbers when you press CH +/–.
1
Press CH +/– until the unused or unwanted channel numbers appears on the
screen.
screen.
2
Press ADD/ERASE.
“–” appears beside the
channel number, indicating
that disabling is complete.
channel number, indicating
that disabling is complete.
To cancel the skip setting
Preset the channel again.
ADD/
ERASE
–25
TV
1
2
3
4
6
7
8
9
0
5
SOUND
MODE
FAVORITE
WAKE UP
SLEEP
CABLE
AUTO
PROGRAM
ADD/
ERASE
JUMP
ENT
CH
VOL
SELECT
PIC MODE
+25
ADD/
ERASE
ADD/ERASE
ENT
CH +/–
Number
buttons
buttons
Presetting channels (continued)
Click on the first or last page to see other KV-XA21M83 service manuals if exist.