DOWNLOAD Sony KV-SZ292M88 Service Manual ↓ Size: 9.89 MB | Pages: 119 in PDF or view online for FREE

A

8 

i

Design and specifications are subject to change without notice.

110-240 V AC, 50/60 Hz

Indicated on the rear of the TV

B/G, I, D/K, M

PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43

VHF : E2 to E12 /UHF : E21 to E69 /
CATV : S01 to S03, S1 to S41

UHF : B21 to B68 /CATV : S01 to S03, S1 to S41

VHF : C1 to C12, R1 to R12 /
UHF : C13 to C57, R21 to R60 /
CATV : S01 to S03, S1 to S41, Z1 to Z39

VHF : A2 to A13 /UHF : A14 to A79 /
CATV : A-8 to A-2, A to W+4, W+6 to W+84

75-ohm external terminal

6 W + 6 W

Input: 2

Output: 1

Phono jacks; 1 Vp-p, 75 ohms

Input: 3

Output: 1

Phono jacks; 500 mVrms

Input: 1

Phono jacks;
Y: 1 Vp-p, 75 ohms,
sync negative
C

B

: 0.7 Vp-p, 75 ohms

C

R

: 0.7 Vp-p, 75 ohms

Output: 1

Stereo minijack

29 in.

25 in.

72

64

Measured diagonally

68

60

Measured diagonally

774 

×

 590 

×

 506

704 

×

 530 

×

 506

46

35

01GB02WAR-SVApak.p65

4/19/07, 4:02 PM

2

Black

Clean the TV with a dry and soft
cloth. Do not use benzine, thinner,
or any other chemicals to clean the
TV. Do not attach anything (e.g.,
adhesive tape, cellophane tape,
glue) on the painted cabinet of the
TV. Do not scratch the picture
tube.

B

•  Dangerously high voltages are present inside the TV.
•  TV operating voltage: 110 – 240 V AC.
• Do not plug in the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries from the

remote if you are not going to use it for several days. If any liquid leaks from the
batteries and touches your skin, immediately wash it away with water.

Install the TV on a stable TV stand
and floor which can support the
TV set weight. Ensure that the TV
stand surface is flat and its area is
larger than the bottom area of the
TV.

Do not plug in too many
appliances to the same power
socket. Do not damage the power
cord.

For children’s safety, do not leave
children alone with the TV. Do not
allow children to climb onto it.

For your own safety, do not touch
any part of the TV, the power cord
and the antenna cable during
lightning storms.

Do not place any objects on the TV.
The apparatus shall not be
exposed to dripping or splashing
and that no objects filled with
liquids, such as vases, shall be
placed on the apparatus.

Do not operate the TV if any liquid
or solid object falls into it. Have it
checked immediately by qualified
personnel only.

Do not block the ventilation
openings of the TV.  Do not install
the TV in a confined space, such
as a bookcase or built-in cabinet.

Do not open the cabinet and the
rear cover of the TV as high
voltages and other hazards are
present inside the TV. Refer
servicing and disposal of the TV
to qualified personnel.

Pull the power cord out by the
plug.  Do not pull the power cord
itself. Even if your TV is turned
off, it is still connected to the AC
power source (mains) as long as
the power cord is plugged in.
Unplug the TV before moving it
or if you are not going to use it for
several days.

To prevent fire or shock hazard, do
not expose the TV to rain or
moisture.

Your TV is recommended for
home use only. Do not use the TV
in any vehicle or where it may be
subject to excessive dust, heat,
moisture or vibrations.

01GB02WAR-SVApak.p65

4/19/07, 4:02 PM

3

Black

C

To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.

Screw the band to the TV stand and to the
provided hole at the rear of your TV.

(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and

the other clamp to the provided hole at
the rear of your TV.

(1) Attach each end of a cord or chain to

the provided holders at the rear of your
TV.

(2) Securely fix the attached cord or chain

to a wall or pillar using an attachment
which can support the TV set weight.

 • Use only the supplied screws. Use of other screws may damage the TV.

01GB02WAR-SVApak.p65

4/19/07, 4:02 PM

4

Black

Confirm

Select

End

b

b

Insert the batteries (supplied) into the remote.

 • Do not use old or different types of batteries together.

Set up the TV by following the instructions of the
“Initial Setup” menu (see E).

Plug in the power cord, then press 1 on the TV to
turn it on.

 • The 1 (standby) indicator flashes green for a few seconds

when turning on the TV. This does not indicate a
malfunction.

Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.

 • You can also connect your TV to other optional

components (see F).

D

01GB02WAR-SVApak.p65

4/19/07, 4:02 PM

5

Black