Sony KV-PG21P10 Service Manual ▷ View online
– 9 –
KV-PG21P10
RM-952
J
Presetting channels
You can automatically preset up to 100 TV channels in numerical sequence
from program number 1, or manually preset desired channels and channels
that cannot be preset automatically.
from program number 1, or manually preset desired channels and channels
that cannot be preset automatically.
Presetting channels automatically
from a specified program number
from a specified program number
1
Press SELECT until “AUTO PROGRAM” appears
on the screen.
on the screen.
2
Press + or – once to enter the “AUTO
PROGRAM” mode.
PROGRAM” mode.
The on-screen display will start flashing.
3
Press PROGR +/– or the number buttons until
the desired program number appears on the
screen.
the desired program number appears on the
screen.
4
Press + or – to start presetting channels
automatically.
automatically.
Presetting channels manually
1
Press SELECT until “MANUAL PROGRAM”
appears on the screen.
appears on the screen.
2
Press + or – once to enter the “MANUAL
PROGRAM” mode.
PROGRAM” mode.
3
Press PROGR +/– or the number buttons until
the desired program number appears on the
screen.
the desired program number appears on the
screen.
4
Press + or – until the desired channel picture
appears on the screen.
appears on the screen.
5
To preset other channels manually, repeat steps
3 to 4.
3 to 4.
TV
1
2
3
4
6
7
8
9
-
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
2
Number
buttons
SELECT
PROGR +/–
+ or –
PIC MODE
Presetting channels (continued)
To change the color system setting
If the color is abnormal when receiving programs through the 8 (antenna) terminal
or the t (video input) jack
or the t (video input) jack
(1) Press SELECT until “COLOR SYSTEM” appears on the screen.
(2) Press + or – to select the appropriate color system until the color is optimal.
AUTO
PAL
NTSC3.58
NTSC4.43
To skip program numbers
(1) Press PROGR +/– or the number buttons until the unused or unwanted program
number appears on the screen.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – once to enter the “MANUAL PROGRAM” mode.
(4) Press PIC MODE to skip the unused or unwanted program number.
(5) Press SELECT to exit the “MANUAL PROGRAM” mode.
Note
• To restore the skipped program number again, preset the channel automatically or manually.
• To restore the skipped program number again, preset the channel automatically or manually.
To use the fine tuning function
The fine tuning (FINE) function may help to reduce the following problems: double
images and lines moving across the TV screen.
images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – once to enter the “MANUAL PROGRAM” mode.
(4) Press to display “FINE” on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to exit the “MANUAL PROGRAM” mode.
I
Setting the timers
You can turn on and off your TV by using the and buttons respectively.
Setting the Wake Up timer
1
Press until the desired period of time
appears on the screen.
appears on the screen.
The Wake Up timer starts immediately after you
have set it.
have set it.
2
Select the TV channel or video input you want
to wake up to.
to wake up to.
3
Press \/1, or set the Sleep timer if you want
the TV to turn off automatically.
the TV to turn off automatically.
The indicator on the TV lights up orange when
the TV goes into standby mode.
the TV goes into standby mode.
Setting the Sleep timer
Press until the desired period of time
appears on the screen.
appears on the screen.
The Sleep timer starts immediately after you have
set it.
set it.
Notes
• You can also cancel the Wake Up and Sleep timers by turning off the TV’s main power.
• If no buttons or controls are pressed for more than two hours after the TV is turned on using
• You can also cancel the Wake Up and Sleep timers by turning off the TV’s main power.
• If no buttons or controls are pressed for more than two hours after the TV is turned on using
the Wake Up timer, the TV automatically goes into standby mode.
TV
1
2
3
4
6
7
8
9
-
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
2
TV
1
2
3
4
6
7
8
9
-
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
2
qa
0
qs
qd
qd
qf
qg
qh
qj
qk
ql
8
9
7
6
5
4
3
2
1
H
Remote control
WAKE UP TIMER:0H10M
WAKE UP TIMER:OFF
WAKE UP TIMER:12H00M
(After 10 minutes)
(No Wake Up timer)
(After 12 hours)
SLEEP TIMER:30M
SLEEP TIMER:60M
SLEEP TIMER:OFF
SLEEP TIMER:90M
(After 30 minutes)
(No Sleep timer)
(After 60 minutes)
(After 90 minutes)
\
/1
Button
Function
1
?/1
Turn off temporarily or
turn on the TV.
turn on the TV.
2
a
Display the TV program.
3
JUMP
Jump to previous
channel.
channel.
4
PROGR +/–
Select program number.
5
2
+/–
Adjust volume.
6
SELECT
Select the desired item.
7
PIC MODE
Select picture mode.
9
+/–
Adjust items.
0
Display on-screen
information.
information.
qa
%
Mute the sound.
qd
t
Select TV or video input.
qf
0 – 9, ÷
Input numbers.
Timer operations
qj
Set TV to turn on
automatically.
automatically.
qk
Set TV to turn off
automatically.
automatically.
qg
SOUND MODE
Not function for your TV.
qh
A/B
Not function for your TV.
Teletext operations
8
x
(red, green,
yellow, blue)
0
qs
qd
Not function for your TV.
qh
qj
qk
ql
FAVORITE
Not function for your TV.
See
–
–
–
–
–
–
K
–
–
–
–
–
–
–
I
I
–
–
–
–
– 10 –
KV-PG21P10
RM-952
K
Customizing the picture
You can customize the picture by selecting the picture mode or by adjusting its
settings.
settings.
Selecting the picture mode
Press PIC MODE to select the desired picture mode.
Select
To
“DYNAMIC”
view high contrast pictures.
“STANDARD”
view normal contrast pictures.
“SOFT”
view mild pictures.
Adjusting the picture setting
1
Press SELECT until the desired setting appears.
Each time you press SELECT, the setting item will
change as follows:
change as follows:
2
Press + or – to adjust the item.
3
To adjust other items, repeat steps 1 to 2.
Notes
• “HUE” can be adjusted for the NTSC color system only.
• Reducing “SHARPNESS” can also reduce picture noise.
• “HUE” can be adjusted for the NTSC color system only.
• Reducing “SHARPNESS” can also reduce picture noise.
TV
1
2
3
4
6
7
8
9
-
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
2
PIC MODE
SELECT
+ or –
PICTURE
COLOR
BRIGHT
HUE
SHARPNESS
L
Adjusting the picture position
B
KV-PG21P10 only
If the picture is slanting, you can adjust the picture position using the
“PIC ROTATION” function until it is optimal.
“PIC ROTATION” function until it is optimal.
1
Press SELECT repeatedly until “PIC ROTATION”
appears on the screen.
appears on the screen.
2
Press + or – to adjust the picture position.
The
+
or icon on the screen flashes while
adjusting.
Note
• To reduce the slanting picture, keep external speakers or other electrical equipment away
• To reduce the slanting picture, keep external speakers or other electrical equipment away
from the TV.
FAVORITE
+ or –
SELECT
NICAM
(Stereo sound)
MONO
(Regular sound)
t
t
NICAM MAIN
(Main sound)
NICAM SUB
(Sub sound)
(Sub sound)
MONO
(Regular sound)
t
t
t
NICAM MAIN
(Main sound)
MONO
(Regular sound)
t
t
MONO
(Regular sound)
STEREO
(Stereo sound)
t
t
M
Enjoying stereo or bilingual
programs
programs
B
Not function for your TV
You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo
systems by using the A/B button.
systems by using the A/B button.
Notes
• If the stereo sound is noisy when receiving a stereo program, select “MONO”. The sound
• If the stereo sound is noisy when receiving a stereo program, select “MONO”. The sound
becomes monaural, but the noise is reduced.
• If the sound is distorted when receiving a monaural program through the 8 (antenna)
terminal, press A/B repeatedly until “MONO” appears on the screen. To cancel the monaural
sound setting, press A/B again until “AUTO” appears on the screen.
sound setting, press A/B again until “AUTO” appears on the screen.
MAIN
(Main sound)
SUB
(Sub sound)
t
t
When receiving a NICAM program
Broadcasting
On-screen display (Selected sound)
NICAM
stereo
stereo
NICAM
bilingual
bilingual
NICAM
monaural
monaural
When receiving an A2 program
Broadcasting
On-screen display (Selected sound)
A2
stereo
stereo
A2
bilingual
bilingual
TV
1
2
3
4
6
7
8
9
-
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
2
A/B
N
Viewing Teletext
B
Not function for your TV
Some TV stations broadcast an information service called Teletext which
allows you to receive various information, such as stock market reports and
news.
allows you to receive various information, such as stock market reports and
news.
You can use the buttons on the remote to view Teletext.
To
Do this
display a Teletext
Press
. Each time you press
, the
page on the
screen changes as follows:
TV picture
Teletext t Teletext and TV t TV.
If there is no Teletext broadcast, “100” is
displayed at the top left corner of the
screen.
If there is no Teletext broadcast, “100” is
displayed at the top left corner of the
screen.
check the contents
Press .
of a Teletext service
An overview of the Teletext contents,
including page numbers, appears on the
screen.
including page numbers, appears on the
screen.
select a Teletext page Press the number buttons to enter the
three-digit page number of the desired
Teletext page. If you make a mistake,
reenter the correct page number. To
access the next or previous page, press
PROGR +/–.
Teletext page. If you make a mistake,
reenter the correct page number. To
access the next or previous page, press
PROGR +/–.
hold (pause) a
Press
to display the symbol “z” at
Teletext display
the top left corner of the screen. To
resume normal Teletext viewing, press
resume normal Teletext viewing, press
or
.
reveal concealed
Press
.
information (e.g.,
To conceal the information, press the
an answer to a quiz)
button again.
enlarge the Teletext
Press
. Each time you press
, the
display
Teletext display changes as follows:
Enlarge upper half t Enlarge lower half
t Normal size.
Enlarge upper half t Enlarge lower half
t Normal size.
stand by for a Teletext 1 Enter the Teletext page number that
page while watching
page while watching
you want to refer to, then press
.
a TV program
2 When the page number is displayed,
press
to show the text.
select a FASTEXT
Press
x
(red, green, yellow and blue)
menu or the colored
that corresponds to the desired menu or
boxes
page number.
turn off Teletext
Press a.
Note
• The FASTEXT feature can be used only when the FASTEXT broadcast is available.
• The FASTEXT feature can be used only when the FASTEXT broadcast is available.
TV
1
2
3
4
6
7
8
9
-
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
2
(red,
green,
yellow,
blue)
a
Good morning!
Good morning!
Slanting Optimal
– 11 –
KV
-PG21P10
-PG21P10
RM-952
2-6. TERMINAL BRACKET REMOVAL
SECTION 2
DISASSEMBLY
2-1. REAR COVER REMOVAL
2-2. SPEAKER REMOVAL
2-3. CHASSIS ASSY REMOVAL
1 Seven screws
(+BVTP 4
× 16)
1 Rear Cover
1 Four screws
(BVTP 3
× 12)
CRT SUPPORT BLOCK
Speaker
Push claw
2-5. SERVICE POSITION
Caution:
Do not take out CRT support block while TV set in
standing position.
Note:
Undress necessary wires that creates tension while
placing the chassis into Service Position.
2-4. F BOARD REMOVAL
1 One screw
(+BVTP 4
× 16)
2 Terminal Bracket
F Board
– 12 –
KV
-PG21P10
-PG21P10
RM-952
2-7. REPLACEMENT OF PARTS
For replacements of light guide,unscrew them,
exchange with new parts and fix them with
screws respectively.
exchange with new parts and fix them with
screws respectively.
2-7-2. Replacement of Power Button
2-7-1. Replacement of Light Guide
2-8. PICTURE TUBE REMOVAL
Note:
•
The picture tube for Oceania model is upside down, and the position for the anode
cap and the tension spring are changed accordingly.
cap and the tension spring are changed accordingly.
•
Please make sure the TV set is not in standing position before removing necessary
CRT support located on bottom right and left.
CRT support located on bottom right and left.
One screw
(+BVTP 3
(+BVTP 3
× 12)
1
Push to direction of arrow
and remove
and remove
!™
!£
8
Demagnetic coil
4 Four screws
(BVTP 3
× 12)
!º
Two screws
(Tapping 5+
Crown Washer)
(Tapping 5+
Crown Washer)
3 Speaker
(5
× 9cm)
6 Tension
spring
7
Chassis assy
5 Deflection
yoke
2
CV board
1
Anode cap
Coating earth assy
!∞
Picture tube
!¢ Cushion
9 Two screws
(Tapping 5 +
Crown Washer)
Crown Washer)
!¡
Holder DGC
Cushion DGC
Cushion DGC
A Board
CRT Support Block
Slim Beznet
CRT Support Block
Screw
Location
Location
Beznet
hook
hook
Click on the first or last page to see other KV-PG21P10 service manuals if exist.