Sony KV-PF14L7J Service Manual ▷ View online
–
9
–
–
KV
-PF14L7J/PF14P40
-PF14L7J/PF14P40
RM-952
4
Using Your New TV
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the “Connecting a VCR” diagram below.
Using Your New TV
IEC connector
(not supplied)
(not supplied)
To video and
audio outputs
audio outputs
VCR
(yellow)
(black)
Antenna cable (not supplied)
To … 1
(video input)
(video input)
Audio/Video cable
(not supplied)
(not supplied)
: Signal flow
To antenna
output
output
Antenna cable
(not supplied)
(not supplied)
Rear of TV
Connecting a VCR
To watch the video, press …
(see page 12).
or
: Signal flow
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
1
Rear of TV
To ˘
(antenna)
(antenna)
5
Using Your New TV
Using Y
our New TV
Preset the channels automatically
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 9).
Now You Are Ready. . .
To watch your TV, see page 11.
Notes
• If you connect a stereo VCR, connect the yellow plug to
• If you connect a stereo VCR, connect the yellow plug to
(the yellow
jack) and the white plug to (the black jack).
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
Step 2
Note
• Do not use old batteries nor use different types of batteries together.
• Do not use old batteries nor use different types of batteries together.
Step 3
CAUTION
Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
Insert the batteries
into the remote
into the remote
Front of TV
1
1
1
2
VHF
LOW
B/G
–
10
–
KV
-PF14L7J/PF14P40
-PF14L7J/PF14P40
RM-952
7
Using Your New TV
Using Y
our New TV
Securing the TV
(KV-PF21P40 only)
To prevent the TV from falling, secure the TV using one of the following methods:
A
With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.
the TV using the provided hole.
or
B
Put the cord or chain through the clamps to secure the TV against a wall or
pillar.
pillar.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
• Use only the supplied screws. Use of other screws may damage the TV.
20
mm
mm
A
B
3.8mm
or
6
Using Your New TV
Connecting optional components
You can connect optional video components, such as a VCR, multi disc player,
camcorder or video game.
camcorder or video game.
To watch the picture of the connected equipment, press …
(see page 12).
Connecting a camcorder/video game equipment
using the … (video input) jacks
using the … (video input) jacks
Note
• You can also connect video equipment to the … 1 (video input) jacks at
• You can also connect video equipment to the … 1 (video input) jacks at
the rear of your TV.
Connecting video equipment using the Ú
(monitor output) jacks
(monitor output) jacks
Note
• When connecting a stereo VCR, connect the yellow plug to
• When connecting a stereo VCR, connect the yellow plug to
(the yellow
jack) and the white plug to (the black jack).
Front of TV
Camcorder
Video game
equipment
equipment
To video and
audio outputs
audio outputs
(yellow)
(black)
Rear of TV
To
antenna
output
antenna
output
VCR
: Signal flow
To
…
2
(video input)
To Ú
(monitor
output)
(monitor
output)
or
Audio/Video cable (not supplied)
Antenna cable (not supplied)
2
1
Audio/Video cable (not supplied)
: Signal flow
To video
and audio
inputs
and audio
inputs
–
11
–
KV
-PF14L7J/PF14P40
-PF14L7J/PF14P40
RM-952
8
Using Your New TV
Presetting
channels
channels
You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
Presetting channels automatically
1
Press U to turn on the TV.
2
Press AUTO PROGR.
To preset channels automatically from a specified program number
(1) Press SELECT until “AUTO PROGRAM” appears.
(2) Press + or –.
The on-screen display will start flashing.
(3) Press PROGR +/– or the number buttons until the desired program number
appears.
(4) Press + or –.
u
Number buttons
SELECT
.
+/–
PROGR +/–
+ or –
PIC MODE
TV
1
2
3
4
6
7
8
9
÷
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
Á
VHF LOW B/G
9
Using Your New TV
Using Y
our New TV
Presetting channels manually
1
Press SELECT until
“MANUAL PROGRAM”
appears.
“MANUAL PROGRAM”
appears.
2
Press + or –.
3
Press PROGR +/– or the
number buttons until the
desired program number
appears.
number buttons until the
desired program number
appears.
4
Press + or – until the
desired channel picture
appears.
desired channel picture
appears.
5
Press SELECT.
To change the color system setting
If the color is abnormal when receiving programs through the ˘ (antenna) terminal
or the … (video input) jack
or the … (video input) jack
(1) Press SELECT until “COL SYS”
appears.
(2) Press + or – to select the appropriate
color system until the color is
optimal.
optimal.
Tip
• Normally set “COL SYS” to “AUTO”.
• Normally set “COL SYS” to “AUTO”.
continued
MANUAL PROGRAM
SELECT
VHF LOW B/G
or
1
2
3
4
5
6
7
8
0
-/--
9
PROGR
1
SELECT
COL SYS: AUTO
AUTO
PAL
NTSC 3.58
NTSC 4.43
–
12
–
KV
-PF14L7J/PF14P40
-PF14L7J/PF14P40
RM-952
11
Using Your New TV
Using Y
our New TV
Watching the TV
This section explains functions used
while watching the TV. Most operations
can be done using the remote.
while watching the TV. Most operations
can be done using the remote.
1
Press U to turn on the TV.
When the TV is in the
standby mode (the u
indicator on the TV is lit
red), press u on the remote
or PROGR +/– on the TV.
standby mode (the u
indicator on the TV is lit
red), press u on the remote
or PROGR +/– on the TV.
2
Press PROGR +/– or the
number buttons to select
the TV program.
number buttons to select
the TV program.
For double digit numbers,
press ÷, then the number
(e.g., for 25, press ÷, then
2 and 5).
press ÷, then the number
(e.g., for 25, press ÷, then
2 and 5).
3
Press
¸
+/– to adjust
the volume.
¤
u
…
;
;
Number buttons
SELECT
.
+/–
PROGR +/–
+ or –
JUMP
or
continued
TV
1
2
3
4
6
7
8
9
÷
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
Á
1
2
3
4
5
6
7
8
0
-/--
9
PROGR
10
Using Your New TV
Skipping program numbers
1
Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
program number appears.
2
Press SELECT until “MANUAL PROGRAM” appears.
3
Press + or –.
4
Press PIC MODE.
5
Press SELECT.
To preset the skipped program number again
Preset the channel automatically or manually.
Tip
• You can also use SELECT and
• You can also use SELECT and
¸
+/– on the TV to preset channels and
skip program numbers.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems: double
images and lines moving across the TV screen.
images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control once.
(4) Press
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control once.
(4) Press
to display “FINE” on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to return to normal screen.
Presetting channels (continued)
Click on the first or last page to see other KV-PF14L7J service manuals if exist.