DOWNLOAD Sony KV-HF21M50 Service Manual ↓ Size: 2.42 MB | Pages: 63 in PDF or view online for FREE

– 9 –

4

Using Your New TV

VIDEO

VIDEO IN

VIDEO OUT

AUDIO

L(MONO)

R

1

If you wish to connect a VCR, see the “Connecting a VCR” diagram below.

To … 1
(video input)

To watch the video, press … 

 (see page 12).

To ˘
(antenna)

5

Using Your New TV

Notes
• If you connect a monaural VCR, connect the yellow plug to 

 (the

yellow jack) and the black plug to  -L (MONO) (the white jack).

• If you connect  a VCR  to the ˘ (antenna) terminal, preset the signal

output from the VCR to the program number 0 on the TV.

• When no signal is input to the connected video equipment, the TV screen

becomes blue.

Note
• Do not use old batteries nor use different types of batteries together.

Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.

Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 9).

Note
• During automatic channel presetting, your TV screen will indicate “B/G”,

“I”, “D/K” or “M” for the TV system.

ONE-PUSH  AUTOMATIC  PROGRAMING

ONE-PUSH  AUTOMATIC  PROGRAMMING

– 10 –

6

Using Your New TV

You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.

To watch the picture of the connected equipment, press … 

 (see page 12).

Connecting a camcorder/video game equipment
using the … (video input) jacks

Note
• You can also connect video equipment to the … 1 (video input) jacks at

the rear of your TV.

To… 2
(video input)

ONE-PUSH  AUTOMATIC  PROGRAMING

2

6

Using Your New TV

You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.

To watch the picture of the connected equipment, press … 

 (see page 12).

Connecting a camcorder/video game equipment
using the … (video input) jacks

Note
• You can also connect video equipment to the … 1 (video input) jacks at

the rear of your TV.

Connecting audio/video equipment using the Ú
(monitor output) jacks

Note
• When connecting a monaural VCR, connect the yellow plug to 

 (the

yellow jack) and the black plug to   -L (MONO) (the white jack).

L(MONO)

1

ONE-PUSH  AUTOMATIC  PROGRAMING

ONE-PUSH  AUTOMATIC  PROGRAMING

2

To… 2
(video input)

To Ú
(monitor
output)

– 11 –

7

Using Your New TV

To prevent the TV from falling, secure the TV using one of the following methods:

A

With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.

B

Put the cord or chain through the clamps to secure the TV against a wall or
pillar.

Note
• Use only the supplied screws. Use of other screws may damage the TV.

A

B

8

Using Your New TV

You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.

TV

1

2

3

4

6

7

8

9

÷

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

Á

u

.

ONE-PUSH  AUTOMATIC  PROGRAMING

Press U to turn on the TV.

Press AUTO PROGR.

Note
• During automatic channel presetting, your TV screen will indicate “B/G”,

“I”, “D/K” or “M” for the TV system.

(1) Press SELECT until “AUTO PROGRAM” appears.

(2) Press + or –.

The on-screen display will start flashing.

(3) Press PROGR +/– or the number buttons until the desired program number

appears.

(4) Press + or –.

– 12 –

10

Using Your New TV

If the color is abnormal when receiving programs through the ˘ (antenna) terminal
or the … (video input) jack

(1) Press SELECT until “COL SYS” appears.

(2) Press + or – to select the appropriate color system until the color is optimal.

Tip
• Normally set “COL SYS” to “AUTO”.

Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.

Press SELECT until “MANUAL PROGRAM” appears.

Press + or –.

Press PIC MODE.

Press SELECT.

Preset the channel automatically or manually.

Tip
• You can also use SELECT and . +/– on the TV to preset channels and

skip program numbers.

The fine tuning (FINE) function may help to reduce the following problems: double
images and lines moving across the TV screen.

You can use the fine tuning function as below:
1) Select the program number you want to adjust.
2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
3) Press + or – on the remote control once.
4) Press 

 

 to display “FINE” on the screen.

5) Press + or – continuously until the above problems are minimized.

The + or – icon on the screen flashes while tuning.

6) Press SELECT to return to normal screen.

9

Using Your New TV

Press SELECT until
“MANUAL PROGRAM”
appears.

Press + or –.

Press PROGR +/– or the
number buttons until the
desired program number
appears.

Press + or – until the
desired channel picture
appears.

Press SELECT.

If the picture or sound is abnormal when receiving programs through the ˘ (antenna)
terminal

(1) Press SELECT until “TV SYS” appears.

(2) Press + or – to select the appropriate TV system until the picture or sound quality

is optimal.

PROGR

SELECT

SELECT