DOWNLOAD Sony KV-HA14M80 (serv.man2) Service Manual ↓ Size: 3.18 MB | Pages: 53 in PDF or view online for FREE

– 9 –

TV

1

2

3

4

6

7

8

9

-

0

5

JUMP

SOUND 

MODE

 

SPACE 
SOUND

PROGR

2

J

You can automatically preset up to 100 TV channels in numerical sequence
from program number 1, or manually preset desired channels and channels
that cannot be preset automatically.

Press SELECT until “AUTO PROGRAM” appears
on the screen.

Press + or – once to enter the “AUTO
PROGRAM” mode.

The on-screen display will start flashing.

Press PROGR +/– or the number buttons until
the desired program number appears on the
screen.

Press + or – to start presetting channels
automatically.

Press SELECT until “MANUAL PROGRAM”
appears on the screen.

Press + or – once to enter the “MANUAL
PROGRAM” mode.

Press PROGR +/– or the number buttons until
the desired program number appears on the
screen.

Press + or – until the desired channel picture
appears on the screen.

To preset other channels manually, repeat steps
3 to 4.

If the picture or sound is abnormal when receiving programs through the 8 (antenna
input) terminal

(1) Press SELECT until “TV SYS” appears on the screen.

(2) Press + or – to select the appropriate TV system until the picture or sound quality

is optimal.

If the color is abnormal when receiving programs through the 8 (antenna input)
terminal or the t (video input) terminal

(1) Press SELECT until “COLOR SYS” appears on the screen.

(2) Press + or – to select the appropriate color system until the color is optimal.

 

(1) Press PROGR +/– or the number buttons until the unused or unwanted program

number appears on the screen.

(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.

(3) Press + or – once to enter the “MANUAL PROGRAM” mode.

(4) Press PIC MODE to skip the unused or unwanted program number.

(5) Press SELECT to exit the “MANUAL PROGRAM” mode.

Note
• To restore the skipped program number again, preset the channel automatically or manually.

The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.

You can use the fine tuning function as below:

(1) Select the program number you want to adjust.

(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.

(3) Press + or – once to enter the “MANUAL PROGRAM” mode.

(4) Press   to display “FINE” on the screen.

(5) Press + or – continuously until the above problems are minimized.

The + or – icon on the screen flashes while tuning.

(6) Press SELECT to exit the “MANUAL PROGRAM” mode.

K

You can customize the picture and sound by selecting the picture and sound
modes or by adjusting its settings.

You can change the sound effect by selecting the space sound mode.

  Press PIC MODE to select the desired picture
  mode.

“DYNAMIC”

view high contrast pictures.

“STANDARD”

view normal contrast pictures.

“SOFT”

view mild pictures.

  Press SOUND MODE to select the desired sound
  mode.

“9 DYNAMIC”

listen to dynamic and clear
sound that emphasizes the low
and high sound.

“9 DRAMA”

listen to sound that emphasizes
vocals and background music.

“9 SOFT”

listen to soft sound.

Press SELECT until the desired setting appears.

Each time you press SELECT, the setting item will change as follows:

Press + or – to adjust the item.

To adjust other items, repeat steps 1 to 2.

Notes
• “HUE” can be adjusted for the NTSC color system only.
• Reducing “SHARP” can also reduce picture noise.

TV

1

2

3

4

6

7

8

9

-

0

5

JUMP

SOUND 

MODE

PROGR

2

 

SPACE 
SOUND

Press SPACE SOUND.

“ON”

listen to monaural sound with a stereo-like effect.

“OFF”

turn off space sound mode.

Note
• You can also turn space sound on or off using the SELECT and + or – buttons.

– 10 –

K

You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo
systems by using the A/B button.

NICAM
stereo

NICAM
bilingual

NICAM
monaural

A2
stereo

A2
bilingual

Notes
• If the sound is distorted when receiving a monaural program through the 8 (antenna)

terminal, press A/B repeatedly until “MONO” appears on the screen.  To cancel the monaural
sound setting, press A/B again until “AUTO” appears on the screen.

• If the stereo sound is noisy when receiving a stereo program, select “MONO”.  The sound

becomes monaural, but the noise is reduced.

• Before receiving a NICAM stereo program in China, please check the NICAM broadcast

condition in your area.  When receiving a NICAM stereo program, the receiving conditions
might vary depending on area.  In addition, different strength of the NICAM broadcast signal
might affect the receiving quality.

TV

1

2

3

4

6

7

8

9

-

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

2

NICAM

(Stereo sound)

MONO

(Regular sound)

t

t

NICAM MAIN

(Main sound)

NICAM SUB
(Sub sound)

MONO

(Regular sound)

t

t

t

NICAM MAIN

(Main sound)

MONO

(Regular sound)

t

t

MONO

(Regular sound)

STEREO

(Stereo sound)

t

t

MAIN

(Main sound)

SUB

(Sub sound)

t

t

L

If you find any problem while viewing your TV, please check the following
guide.  If any problem persists, contact your Sony dealer.

The 1 (standby)

• Check the antenna cable and connection on the TV, VCR and on the wall.
• Preset the channel manually again.  (See J)
• Check the antenna setup.  Contact a Sony dealer for advice.

• Select the appropriate TV system.  (See J)

• Check the power cord, antenna and the VCR connections.
• Press ?/1 (power) or ! (main power) to turn on the TV.

• Press 2 + to increase the volume level.
• Press % to cancel the muting.

• Do not use a hair dryer or other equipment near the TV.
• Check the antenna setup.  Contact a Sony dealer for advice.

• Use the fine tuning ("FINE") function. (See J)
• Turn off or disconnect the booster if it is in use.
• Check the antenna setup.  Contact a Sony dealer for advice.

• Select the appropriate color system.  (See J)
• Adjust the color level. (See K)
• Check the antenna setup.  Contact a Sony dealer for advice.

• Keep external speakers or other electrical equipment away from the TV.

Press ! (main power) to turn off the TV for about 15 minutes, then turn it
on again to demagnetize the TV.

• Count the number of times the 1 (standby) indicator flashes.  Press !

(main power) to turn off your TV.  Contact your nearest Sony service
center.

• Changes in room temperature sometimes make the TV cabinet expand or

contract, making a noise.  This does not indicate a malfunction.

• The TV's demagnetizing function is working.  This does not indicate a

malfunction.

E

If you find any problem while viewing your TV, please check the following
guide.  If any problem persists, contact your Sony dealer.

The 1 (standby)

• Check the antenna cable and connection on the TV, VCR and on the wall.
• Preset the channel manually again.  (See I)
• Check the antenna setup.  Contact a Sony dealer for advice.
• Select the appropriate TV system.  (See I)
• Press A/B until the sound is optimal.

• Check the power cord, antenna and the VCR connections.
• Press ?/1 (power) or ! (main power) to turn on the TV.

• Press 2 + to increase the volume level.
• Press % to cancel the muting.

• Do not use a hair dryer or other equipment near the TV.
• Check the antenna setup.  Contact a Sony dealer for advice.

• Use the fine tuning ("FINE") function. (See I)
• Turn off or disconnect the booster if it is in use.
• Check the antenna setup.  Contact a Sony dealer for advice.

• Select the appropriate color system.  (See I)
• Adjust the color level. (See J)
• Check the antenna setup.  Contact a Sony dealer for advice.

• Keep external speakers or other electrical equipment away from the TV.

Press ! (main power) to turn off the TV for about 15 minutes, then turn it
on again to demagnetize the TV.

• Count the number of times the 1 (standby) indicator flashes.  Press !

(main power) to turn off your TV.  Contact your nearest Sony service
center.

• Changes in room temperature sometimes make the TV cabinet expand or

contract, making a noise.  This does not indicate a malfunction.

• The TV's demagnetizing function is working.  This does not indicate a

malfunction.

–

 11 

–

 Do not take out CRT support block while TV set in

standing position.

 Undress necessary wires that creates tension while

placing the chassis into Service Position.

1 Six screws
     (+BVTP 4 

× 16)

1 Two screws
     (+BVTP 4 

× 16)

2 Rear cover

Speaker

1

 Two screws tapping

A board

Terminal board bracket

One screw
(+BVTP 4 

× 16)

F Board

–

 12 

–

!¢ 

!¢

!£

Demagnetic coil

4 Two screws, step tapping

5 Speaker

(12 

× 5cm)

3 Speaker

(12 

× 5cm)

9 Tension

spring

!™

Chassis assy

!º Deflection

yoke

!¡

C board

8

Anode cap

Coating earth assy

!§ Picture tube

1 Cushion

6 Two screws (5)

tapping

7 Two screws (5)

tapping

2 Two screws, step tapping

!∞ Holder DGC

Cushion DGC

Cushion DGC

Beznet Hook

Two screws
(+BVTP 4x16)

PWB Bracket

CRT Support Block

CRT Support Block

•

Please make sure the TV set is not in standing position before removing necessary
CRT support located on bottom right and left.

For replacements of light guide,unscrew them,
exchange with new parts and fix them with
screws respectively.

One screw
(+BVTP 3 

× 8)

1 Push the claw to direction 
     of arrow and remove

2 Spring compression

3 Power Button