DOWNLOAD Sony KV-AZ21M30 Service Manual ↓ Size: 6.85 MB | Pages: 127 in PDF or view online for FREE

19

x

Some TV stations broadcast an information service called Teletext which allows
you to receive various information, such as stock market reports and news.

You can use the buttons on the remote to view Teletext.

display a Teletext

Press 

. Each time you press 

, the

page on the

screen changes as follows:

TV picture

Teletext t Teletext and TV t TV.
If there is no Teletext broadcast, “100” is
displayed at the top left corner of the
screen.

check the contents

Press 

.

of a Teletext service

An overview of the Teletext contents,
including page numbers, appears on the
screen.

select a Teletext page

Press the number buttons to enter the
three-digit page number of the desired
Teletext page. If you make a mistake,
reenter the correct page number. To
access the next or previous page, press

 or 

.

hold (pause) a

Press 

 to display the symbol “

” at

Teletext display

the top left corner of the screen. To
resume normal Teletext viewing, press

.

reveal concealed

Press 

.

information (e.g.,

To conceal the information, press the

an answer to a quiz)

button again.

enlarge the Teletext

Press 

. Each time you press 

, the

display

Teletext display changes as follows:
Enlarge upper half t Enlarge lower
half t Normal size.

stand by for a Teletext (1) Enter the Teletext page number that
page while watching

you want to refer to, then press 

.

a TV program

(2) When the page number is displayed,

press 

 to show the text.

select a FASTEXT

Press 

 (red, green, yellow and blue)

menu or the colored

that corresponds to the desired menu or

boxes

page number.

turn off Teletext

Press a.

Note
• The FASTEXT feature can be used only when the FASTEXT broadcast is available.

 

TV

1

2

3

4

6

7

8

9

0

5

PROG

A/B

RETURN

WEGA

GATE

,

20

x

You can enjoy stereo  sound or bilingual programs of NICAM and A2 stereo
systems by using the A/B button.

NICAM
stereo

NICAM
bilingual

NICAM
monaural

A2
stereo

A2
bilingual

Note
• If the stereo sound is noisy when receiving a stereo program, select “Mono”.  The sound

becomes monaural but the noise is reduced.

TV

1

2

3

4

6

7

8

9

0

5

PROG

A/B

RETURN

WEGA

GATE

NICAM

(Stereo sound)

Mono

(Regular sound)

t

t

NICAM Main

(Main sound)

NICAM Sub

(Sub sound)

Mono

(Regular sound)

t

t

t

NICAM Main

(Main sound)

Mono

(Regular sound)

t

t

Mono

(Regular sound)

Stereo

(Stereo sound)

t

t

Main

(Main sound)

Sub

(Sub sound)

t

t

21

x

You are able to listen to the FM radio stations using your TV.

To access to FM Radio mode:
Press WEGA GATE button and select “FM Radio” (see page 12).

or

Press FM button on the top control panel (see page 7).
To exit from FM Radio mode:
Press WEGA GATE button, select the desired items: “TV” or “External Inputs”,
then press 

. Select the desired TV channel or external inputs and press 

.

or

Press FM button on the top control panel.

Access to FM Radio mode.

Press V or v to search for the desired FM radio station. The preset number
and label will not be displayed.

If the station has a weak signal, press B or b to fine tune the radio frequency
manually.

Notes
• You can only operate V, v, B and b functions using the remote control buttons in FM

Radio mode.

• The available radio frequency is only for temporary listening pleasure and cannot be

stored in the memory.

• If the message “Please setup FM Radio” appears, display the “Channel Setup” menu and

select “FM Radio Setup” to preset the desired FM radio stations (see page 16).

Note
• When a FM stereo program has static noise, press A/B until “Mono” appears. There will be no

stereo effect, but the noise will be reduced.

Access to FM Radio mode.

Press WEGA GATE button and select “Settings”.
Preset the desired FM radio stations in “FM Radio
Setup” from “Channel Setup” menu (see page 16).

Exit from “Channel Setup” menu by pressing
WEGA GATE button. The selected preset FM radio
station number and label will appear on the screen.
To select the desired preset FM radio station,  press
PROG +/–.

•  You can also use the 1-9 buttons on the remote control to

directly select the desired preset FM radio station.

V, v,

B, b

TV

1

2

3

4

6

7

8

9

0

5

PROG

A/B

RETURN

WEGA

GATE

22

x

If you find any problem while viewing your TV, you can either use the “Factory
Settings” function or check the Troubleshooting guide below. If the problem
persists, contact your Sony dealer.

Press the WEGA GATE button. Choose “Settings” and go to “Setup” (

) menu.

From “Setup” menu, select “Factory Settings”. Then select “Yes” and press 

.

Your TV will go blank for a few seconds, then the “Initial Setup” menu will
appear. Your TV will be set to factory settings, but certain problems may be
solved.

• Check the antenna cable and connection on the TV, VCR and at the wall

(see page 8).

• Check the antenna setup. Contact a Sony dealer for advice.
• Display the “Channel Setup” menu and select “Manual Program” to preset

the channel again (see page 17).

• Display the “Channel Setup” menu and set the “Signal Booster” to “Auto”

from “Manual Program” (see page 17).

• Try using an external booster.

• Turn off or disconnect the external booster if it is in use.
• Display the “Channel Setup” menu and set the “Signal Booster” to “Off”

from “Manual Program” (see page 17).

• Display the “Channel Setup” menu and select the appropriate

“TV System” from “Manual Program” (see page 17).

• Check the power cord, antenna and VCR connections (see page 8).
• Press 

 ?/1

 (power) to turn on the TV (see page 10).

• Press ! (main power) on the TV to turn off the TV for about five seconds,

then turn it on again (see page 7).

• Press 2 + to increase the volume level (see page 10).

• Press 

 to cancel the muting (see page 10).

• Do not use a hair dryer or other equipment near the TV.
• Check the antenna setup. Contact a Sony dealer for advice.

• Use a highly directional antenna.
• Use the fine tuning (“Fine”) function (see page 17).
• Check the antenna setup. Contact a Sony dealer for advice.
• Turn off or disconnect the external booster if it is in use.

• Display the “Picture” menu and select “Custom” from “Picture Mode”, then

adjust the “Color” level from “Picture Adjustment” (see page 14).

• Display the “Setup” menu and check the “Color System” setting

(usually set this to “Auto”) (see page 18).

• Check the antenna setup. Contact a Sony dealer for advice.