Sony KV-AZ21M30 Service Manual ▷ View online
Sony KV-AZ21M61 Group P5 (
GB
, CT, MY)_2-653-914-11 (1)
15
x
Changing the “Sound” setting
The “Sound” menu allows you to adjust the sound settings.
1
Press WEGA GATE and select “Settings”.
2
Press V or v to select the “Sound” icon ( ), then press
.
3
Press V or v to select the desired item (e.g., “Sound Mode”), then press
.
Select
To
“Sound Mode”
choose either “Dynamic” (low and high tones), “Standard”
(voice and high tones) or “Custom”*.
(voice and high tones) or “Custom”*.
“Balance”
Press v or B to emphasize the left speaker.
Press V or b to emphasize the right speaker.
Press V or b to emphasize the right speaker.
“Intelligent Volume”
adjust the volume of all program numbers and video inputs
automatically.
Press V or v to select “On”, then press
automatically.
Press V or v to select “On”, then press
.
To cancel, select “Off”, then press
.
“Surround”
choose either “TruSurround”(surround sound
that spreads out to the rear of a room), “WOW”** (full, deep
bass sound), “Simulated” (stereo-like monaural sound) or
“Off”.
that spreads out to the rear of a room), “WOW”** (full, deep
bass sound), “Simulated” (stereo-like monaural sound) or
“Off”.
* You can adjust the setting to your personal preference in the “Sound Adjustment”
option only when the “Custom” mode is selected.
** BBE High Definition Sound is fully activated maximizing the sound effect in the WOW
mode.
Note
• “Intelligent Volume” is not selectable when “TruSurround” is selected.
• “Intelligent Volume” is not selectable when “TruSurround” is selected.
Adjusting the “Sound Adjustment” items under “Custom”
mode
mode
The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings
of “Custom” mode in the menu.
of “Custom” mode in the menu.
1
Make sure that “Adjust” is selected, then press
.
Selecting “Reset” will set your TV to the factory settings.
2
Press B or b to select the desired sound frequency, then press V or v to
adjust the setting and press
adjust the setting and press
.
The adjusted settings will be received when you select “Custom”.
Notes
• Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency
• Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency
will affect lower pitched sound.
• You may display the settings directly by using button on the remote control (see page 10).
Sony KV-AZ21M61 Group P5 (
GB
, CT, MY)_2-653-914-11 (1)
16
x
Changing the “Channel Setup”
setting
setting
The “Channel Setup” menu allows you to preset channels automatically,
manually preset channels, sort or edit the channels and preset FM Radio
stations.
manually preset channels, sort or edit the channels and preset FM Radio
stations.
1
Press WEGA GATE and select “Settings”.
2
Press V or v to select the “Channel Setup” icon (
), then press
.
3
Press V or v to select the desired item (e.g., “Auto Program”), then press
.
Select
To
“Auto Program”
preset channels automatically.
“Manual Program”
manually preset desired channels and channels that cannot
be preset automatically (see Presetting channels manually
in page 17).
be preset automatically (see Presetting channels manually
in page 17).
“Program Sorting/Edit”
change the order in which the channels appear on the screen,
label the program number, skip the program number and
block unwanted programs.
(see step 3 of the section “Initial Setup” in page 5).
label the program number, skip the program number and
block unwanted programs.
(see step 3 of the section “Initial Setup” in page 5).
“FM Radio Setup”*
preset up to nine FM radio stations.
You can manually preset each FM radio station that can be
received in your area and then store the radio frequency of
the desired FM radio stations.
(1) Press V or v to select the desired FM radio station
You can manually preset each FM radio station that can be
received in your area and then store the radio frequency of
the desired FM radio stations.
(1) Press V or v to select the desired FM radio station
position, then press
.
(2) Press V or v to search the FM radio stations.
Searching stops automatically when a station is tuned in.
If the station has a weak signal, press B or b to fine tune
the radio frequency manually, then press
If the station has a weak signal, press B or b to fine tune
the radio frequency manually, then press
to store the
FM radio station.
(3) You may edit the FM radio station label. Press V or v to
select alphanumeric characters for the label, then press
.
(4) Repeat steps (1) through (3) to preset other FM radio
stations.
* The “FM Radio Setup” feature is only available in FM
Radio mode. To enable this feature, access to FM Radio
mode by using WEGA GATE system (see page 12) or
pressing the FM button on the top control panel (see page
7), then preset your desired FM radio stations according to
the steps mentioned above.
mode by using WEGA GATE system (see page 12) or
pressing the FM button on the top control panel (see page
7), then preset your desired FM radio stations according to
the steps mentioned above.
Notes
• If you preset a blocked program number, that program number will be unblocked
• If you preset a blocked program number, that program number will be unblocked
automatically.
• If you sort a blocked program, that program will remain blocked.
Sony KV-AZ21M61 Group P5 (
GB
, CT, MY)_2-653-914-11 (1)
17
01
Presetting channels manually
1
After selecting “Manual Program”, select the program
number to which you want to preset a channel.
number to which you want to preset a channel.
(1) Make sure “Program” is selected, then press
.
(2) Press V or v until the program number you want
to preset appears on the menu, then press
.
2
Select the desired channel.
(1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press
.
(2) Press V or v until the desired channel’s broadcast appears on the TV screen,
then press
.
3
If the sound of the desired channel is abnormal, select the appropriate TV
system.
system.
(1) Press V or v to select “TV System”, then press
.
(2) Press V or v until the sound becomes normal, then press
.
4
If you are not satisfied with the picture and sound quality, you may be able
to improve them by using the “Fine” tuning feature.
to improve them by using the “Fine” tuning feature.
(1) Press V or v to select “Fine”, then press
.
(2) Press V or v to select “Manual”, then press
.
(3) Press V,v,B or b until the picture and sound quality are optimal, then press
.
The + or – icon on the menu flashes while tuning.
5
If the TV signal is too strong (picture distorted; picture with lines; signal
interference) or weak (snowy picture), you may be able to improve the
picture quality by setting the “Signal Booster” feature.
interference) or weak (snowy picture), you may be able to improve the
picture quality by setting the “Signal Booster” feature.
(1) Press V or v to select “Signal Booster”, then press
.
(2) Press V or v to select either “Off” (for picture distorted; picture with lines;
signal interference) or “Auto” (for snowy picture), then press
.
Sony KV-AZ21M61 Group P5 (
GB
, CT, MY)_2-653-914-11 (1)
18
x
Changing the “Setup” setting
The “Setup” menu allows you to change the menu language, adjust the picture
position, label the connected equipment, select the color system, set the wake up
timer beep and reset your TV to factory settings.
position, label the connected equipment, select the color system, set the wake up
timer beep and reset your TV to factory settings.
1
Press WEGA GATE and select “Settings”.
2
Press V or v to select the “Setup” icon (
), then press
.
3
Press V or v to select the desired item (e.g., “Language”), then press
.
Select
To
“Language”
change the menu language.
Press V or v to select either “English” or “
Press V or v to select either “English” or “
” (Chinese), then
press
.
“Picture Rotation”
adjust the picture position when it is not aligned with the TV
screen.
Press B or b to adjust the picture position, then press
screen.
Press B or b to adjust the picture position, then press
.
“Video Label”
label the connected equipment.
(1) Select “Video Input” and press
(1) Select “Video Input” and press
. Press V or v to select the
input you want to label, then press
.
(2) Select “Label” and press
, then press V or v to select
the label options: “Video 1”/“Video 2”/“DVD”, “VCR”,
“SAT”, “Game” or “Edit”*.
“SAT”, “Game” or “Edit”*.
* You may edit the video label to your favorite name. Press V or v
to select alphanumeric characters for the label, then press
to select alphanumeric characters for the label, then press
.
“Color System”
select the color system.
Press V or v to select either “Auto”, “PAL”, “SECAM”,
“NTSC3.58” or “NTSC4.43”, then press
Press V or v to select either “Auto”, “PAL”, “SECAM”,
“NTSC3.58” or “NTSC4.43”, then press
. Normally, set this to
“Auto”.
“Wake Up Timer
allow your TV to emit beeping sound when TV switches on
Beep”
automatically using wake up timer.
Press V or v to select “On”, then press
.
To cancel, select “Off”, then press
.
“Factory Settings”
reset your TV to factory settings.
Press
Press
and press V or v to select “Yes”, then press
.
To cancel, select “No”, then press
.
Notes
• Color system is not selectable in FM Radio mode.
• To ensure the beeping sound can be heard, you must set an appropriate volume level on your
• Color system is not selectable in FM Radio mode.
• To ensure the beeping sound can be heard, you must set an appropriate volume level on your
TV and make sure the TV is not in mute condition.
• To stop the beeping sound, press any buttons on the remote control or top control panel.
• If no button is pressed for three minutes, the beeping sound will automatically go off.
• If no button is pressed for three minutes, the beeping sound will automatically go off.
Click on the first or last page to see other KV-AZ21M30 service manuals if exist.