DOWNLOAD Sony KV-AR292M50 Service Manual ↓ Size: 13.44 MB | Pages: 127 in PDF or view online for FREE

3

Install the TV on a stable TV stand and floor which
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.

Do not plug in too many appliances to the same
power socket.  Do not damage the power cord.

Pull the power cord out by the plug.  Do not pull
the power cord itself.  Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.

To prevent fire or shock hazard, do not expose the
TV to rain or moisture.

01GB02WAR-MIX.p65

12/17/03, 12:18 PM

3

Black

4

x

To prevent the TV from falling, use the supplied  screws, clamps and band to
secure the TV.

Screw the band to the TV stand and to the
provided hole at the rear of your TV.

(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and

the other clamp to the provided hole at
the rear of your TV.

(1) Attach each end of a cord or chain to

the provided holders at the rear of
your TV.

(2) Securely fix the attached cord or chain

to a wall or pillar using an attachment
which can support the TV set weight.

Note
• Use only the supplied screws.  Use of other screws may damage the TV.

01GB02WAR-MIX.p65

12/17/03, 12:18 PM

4

Black

5

Getting Started ..................................... 6
Setting up your TV
(“Initial Setup”) .................................... 7

TV front and rear panels ..................... 8
Using the remote control and
basic functions ...................................... 9

Selecting the picture and sound
modes .................................................. 11
Viewing Teletext ................................. 12

Introducing the menu system .......... 13

Changing the “Picture” setting ........ 16

Changing the “Sound” setting ......... 18

Changing the “Timer” setting .......... 20

Changing the “Channel Setup”
setting .................................................. 21

Changing the “Setup” setting .......... 23

Connecting optional components ... 24
Troubleshooting ................................. 26
Specifications ...................... Back cover

01GB03TOC-MIX.p65

12/17/03, 12:18 PM

5

Black

6

Installation

x

b

b

Insert the batteries (supplied) into the remote.

Note
• Do not use old or different types of batteries together.

Set up the TV by following the instructions of the
“Initial Setup” menu (see page 7).

Plug in the power cord, then press ! on the TV to
turn it on.

Note
• The 1 (standby) indicator flashes green for a few seconds

when turning on the TV. This does not indicate a
malfunction.

Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.

Tip
• You can also connect your TV to other optional components

(see page 24).

01GB04INS-MIX.p65

12/17/03, 12:19 PM

6

Black