DOWNLOAD Sony KV-29FS13 Service Manual ↓ Size: 11.48 MB | Pages: 110 in PDF or view online for FREE

The PDF of this service manual is not designed to be printed from cover to cover. The pages vary in size, and must therefore be printed in sections 
based on page dimensions. 

Data that does NOT INCLUDE schematic diagrams are formatted to 8.5 x 11 inches and can be printed on standard letter-size and/or A4-sized paper. 

The schematic diagram pages are provided in two ways, full size and tiled.  The full-sized schematic diagrams are formatted on paper sizes between 
8.5” x 11”  and 18” x 30” depending upon each individual diagram size.  Those diagrams that are LARGER than 11” x 17” in full-size mode have been 
tiled for your convience and can be printed on standard 11” x 17” (tabloid-size) paper, and reassembled. 

If you have access to a large paper plotter or printer capable of outputting the full-sized diagrams, output as follows:

1) Note the page size(s) of the schematics you want to output as indicated in the middle window at the bottom of the viewing screen.

2) Go to the File menu and select Print Set-up. Choose the printer name and driver for your large format printer.  Con fi rm that the printer settings 

are set to output the indicated page size or larger.

3) Close the Print Set Up screen and return to the File menu. Select “Print...”  Input the page number of the schematic(s) you want to print in the 

print range window.  Choose OK.

Schematic pages that are larger than 11” x 17” full-size are provided in a 11” x 17” printable tiled format near the end of the document. These can be 
printed to tabloid-sized paper and assembled to full-size for easy viewing.

If you have access to a printer capable of outputting the tabloid size (11” x 17”) paper, then output the tiled version of the diagram as follows:

1) Note the page number(s) of the schematics you want to output as indicated in the middle window at the bottom of the viewing screen.

2) Go to the File menu and select Print Set-up. Choose the printer name and driver for your printer.  Con fi rm that the plotter settings are set to output 

11” x 17”, or tabloid size paper in landscape (  

  ) mode.

3) Close the Print Set Up screen and return to the File menu. Select “Print...”  Input the page number of the schematic(s) you want to print in the 

print range window.  Choose OK.

To print just a particular section of a PDF, rather than a full page, access the Graphics Select tool in the Acrobat Reader tool bar. 

1) To view the Graphics Select Tool, press and HOLD the mouse button over the Text Select Tool which looks like:                                                                                      

This tool will expand to reveal to additional tools.                                                                                                                                                                                                                                                
Choose the Graphics Select tool by placing the cursor over the button on of the far right that looks like: 

2) After selecting the Graphics Select Tool, place your cursor in the document window and the cursor will change to a plus (+) symbol. Click and 

drag the cursor over the area you want to print. When you release the mouse button, a marquee (or dotted lined box) will be displayed outlining 
the area you selected.

3) With the marquee in place, go to the fi le menu and select the “Print...” option.  When the print window appears, choose the option under the section 

called “Print Range” which says “Selected Graphic”.  

Select OK and the output will print only the area that you outlined with the marquee. 

 

 

 

            (continued 

>)

T

All of the text within the service manual PDF is content searchable. This means that you can enter any text, word, phrase or reference number that 
appears in the manual, and the PDF software will search, fi nd and move the cursor to the location where you requested text fi rst appears. This feature 
can be particularly useful in locating components on a specifi c schematic or printed wire circuit board (PWB) diagrams.

Follow these steps to effectively locate a component on a schematic diagram:

1) Locate the schematic you want to search by clicking on the corresponding bookmark on the left side of the screen. The view on the right of the 

screen will then jump to the desired schematic page.

2) Magnify the diagram to at least 400% before conducting a component search. This will enable you to easily view the reference number when 

it is highlighted on screen. To do this, click on the magnifying glass button on the tool bar at the top of the screen. Move the cursor over the 
diagram and RIGHT click you mouse. Select the 400% magnifi cation option on the pop-up menu.  Click on the button with the icon of  the open 
hand to deactivate the magnifi cation tool

3) Search the diagram (or the entire manual) by clicking on the binocular button tool at the top of the screen.  The “Find” window will appear and 

allow you to type in your desired text. Type in a reference designator, such as R502, and click on the “Find” button.  If the component is not on the 
diagram, but is listed anywhere else in the manual, the cursor will jump to the fi rst location the text is found in the fi le.  To fi nd another instance of 
that same text, click on the binocular button again and select “Find Again.”   

 

 

 

 

    

 

 

 

 

 

 

 

 

 

 

 

All of the text within the service manual PDF is content searchable. This means that you can enter any text, word, phrase or reference number that 
appears in the manual, and the PDF software will search, fi nd and move the cursor to the location where you requested text fi rst appears. This feature 
can be particularly useful in locating components on a specifi c schematic or printed wire circuit board (PWB) diagrams.

Follow these steps to effectively locate a component on a schematic diagram:

1) Locate the schematic you want to search by clicking on the corresponding bookmark on the left side of the screen. The view on the right of the 

screen will then jump to the desired schematic page.

2) Magnify the diagram to at least 400% before conducting a component search. This will enable you to easily view the reference number when 

it is highlighted on screen. To do this, click on the magnifying glass button on the tool bar at the top of the screen. Move the cursor over the 
diagram and RIGHT click you mouse. Select the 400% magnifi cation option on the pop-up menu.  Click on the button with the icon of  the open 
hand to deactivate the magnifi cation tool

3) Search the diagram (or the entire manual) by clicking on the binocular button tool at the top of the screen.  The “Find” window will appear and 

allow you to type in your desired text. Type in a reference designator, such as R502, and click on the “Find” button.  If the component is not on the 
diagram, but is listed anywhere else in the manual, the cursor will jump to the fi rst location the text is found in the fi le.  To fi nd another instance of 
that same text, click on the binocular button again and select “Find Again.”   

 

 

 

 

    

 

 

 

 

 

 

 

 

 

 

 

All of the text within the service manual PDF is content searchable. This means that you can enter any text, word, phrase or reference number that 
appears in the manual, and the PDF software will search, fi nd and move the cursor to the location where you requested text fi rst appears. This feature 
can be particularly useful in locating components on a specifi c schematic or printed wire circuit board (PWB) diagrams.

Follow these steps to effectively locate a component on a schematic diagram:

1) Locate the schematic you want to search by clicking on the corresponding bookmark on the left side of the screen. The view on the right of the 

screen will then jump to the desired schematic page.

2) Magnify the diagram to at least 400% before conducting a component search. This will enable you to easily view the reference number when 

it is highlighted on screen. To do this, click on the magnifying glass button on the tool bar at the top of the screen. Move the cursor over the 
diagram and RIGHT click you mouse. Select the 400% magnifi cation option on the pop-up menu.  Click on the button with the icon of  the open 
hand to deactivate the magnifi cation tool

3) Search the diagram (or the entire manual) by clicking on the binocular button tool at the top of the screen.  The “Find” window will appear and 

allow you to type in your desired text. Type in a reference designator, such as R502, and click on the “Find” button.  If the component is not on the 
diagram, but is listed anywhere else in the manual, the cursor will jump to the fi rst location the text is found in the fi le.  To fi nd another instance of 
that same text, click on the binocular button again and select “Find Again.”