DOWNLOAD Sony KV-28FS20U Service Manual ↓ Size: 10.06 MB | Pages: 74 in PDF or view online for FREE

13

You have already tuned the TV automatically using the instructions at the start of this manual. You can however carry out this
operation manually, adding channels to the TV, one at a time.

1. Press the MENU button on the remote control to display 

the menu on the TV screen. 

2. Press the 

V

 or 

v

 buttons to select the 

 symbol on the 

TV screen then press the 

b 

button to enter the PRESET 

menu.

3. Press the 

V

 or 

v

 buttons to select ‘Manual Programme 

Preset’ on the menu screen then press the 

b 

button to enter 

the ‘MANUAL PROGRAMME PRESET’ menu.

4. Press the 

V

 or 

v

 buttons to select a programme number for 

your channel (eg PROGR 1 for BBC1) then press the 

b 

button to enter.

5. Press the 

V

 or 

v

 buttons to select the TV broadcast system 

or a video input source (AV1, AV2 ...) then press the 

b 

button to confirm.

6. Select the first number digit of ‘CHAN’ (channel) then the 

second number digit of ‘CHAN’ with the number buttons 
on the remote control
or
Press the 

V

 or 

v

 buttons to search for the next available 

channel.

7. If you do not wish to store this channel on the programme 

number you selected, press the 

V

 or 

v

 buttons on the 

remote control to continue searching for the desired 
channel.

8. If this is the channel you wish to store, press the OK 

button.

9. Repeat steps 4-8 if you wish to store more channels, then 

press the MENU button to remove the menu from the TV 
screen.

. . . . . . . . .

. . . . . . . . .

Teletext is an information service transmitted by most TV stations.

1. When viewing channels, press a number button on the 

remote control to select the channel which carries the 
teletext service you wish to receive.

2. Press the 

 button on the remote control to switch on 

teletext.

3. Input the three digits of the page number you require 

using the numbered buttons on the remote control. If you 
make a mistake, type in any three digits to complete the 
number then re-enter the correct page number.

4. Press the 

 button to switch off teletext.

Note: Teletext errors may occur if the broadcasting 

signals are weak.

Press the 

 button on the remote control once in teletext

mode or twice in TV mode to superimpose teletext on to the
TV screen. Press the 

 button once more to cancel.

Press the 

 or 

 buttons to select the previous or next

page.

Press the 

 button to freeze the page. Press again to cancel

the freeze.

Press the 

 button to reveal information. Press again to

conceal the information.

(only available if the TV station broadcasts Fastext signals)
When the colour coded menu appears at the bottom of a page,
press the colour button (green, red, yellow or blue) on the
control to access the corresponding page.

Programme

News

Sport

Weather

  25

153

101

  98

Programme

News

Sport

Weather

  25

153

101

  98

Programme

News

Sport

Weather

  25

153

101

  98

Programme 

News

Sport

Weather

  25

153

101

  98

14

I

PAL
NTSC 3.58, 4.43 (only Video In)

UHF:B21-B69

FD Trinitron WIDE
Approx 71cm (28inches) (Approx 66cm picture measured diagonally), 102° deflection

  21-pin Euro connector (CENELEC standard) including audio/video
  input, RGB input, TV audio/video output.

/

  21-pin Euro connector (CENELEC standard) including audio/video

   input, S-video input, Monitor audio/video output.

 Audio outputs - phono jacks

 Video input -phono jacks 
 Audio inputs - phono jacks
  S video input - 4 pin DIN
 Headphones jack - minijack stereo

Left/Right: 2x20W 

(music 

power) 

Sub woofer: 

20W (music power)

Centre

1x10W (music power)

Surround

2x5W (music power)

123W

Approx. 761x496x525mm

Approx. 44.0kg

RM-887 remote control (1)
IEC designated size AA battery (2)
Centre speaker (1)
Surround speaker (2)

Teletext, Smartlink

 1

 2

s

 2

 3
 3

s

Here are some simple solutions to problems which may affect the picture and sound.

No picture (screen is dark), no sound

•

Plug the TV in.

•

Press the 

 button on the front of the TV.

•

If the 

 indicator is on press the 

 button or a numbered 

button on the remote control.

•

Check the aerial connection.

•

Turn the TV off for 3 or 4 seconds and then turn it on again 
using the 

 button on the front of the TV.

Poor or no picture (screen is dark), but 
good sound.

•

Using the MENU system, select the Picture
Adjustment display. Adjust the brightness, picture and colour 
balance levels.

•

From the Picture Adjustment display select Reset to return to 
the factory settings.

Poor picture quality when watching 
an RGB video source.

•

Press the 

 button repeatedly on the remote control until 

the RGB symbol 

 is displayed on the screen.

Good picture, no sound

•

Press the 

 button on the remote control.

•

If 

 is displayed on the screen, press the 

 button on the 

remote control.

No colour on colour programmes

•

Using the MENU system, select the Picture Adjustment 
display and adjust the colour setting.

•

From the Picture Adjustment display select Reset to return to 
the factory settings. 

Distorted picture when changing 
programmes or selecting Teletext

•

Turn off any equipment connected to the scart connectors on 
the rear of the TV.

Remote control does not function

•

Replace the batteries.

The standby indicator 

 on the TV 

flashes

•

Contact your nearest Sony service centre.

No Sound

•

Check that the button marked  

 on the rear of the TV is 

not pressed in. 

/

15

  3   Rear Cover

  1   1 Screw (BTVP 4x16) 

  2   8 Screws 
       (BTVTP  4x16)

  1   Snap off from main bracket

  2   Insert into heatsink

 1  Clip bracket into Beznet

16

  1   Remove CN301 before removing A board

   A Board

   A board

 BE-3E Extension Board