Sony KV-20S90 Service Manual ▷ View online
14
Operating Instructions
Using the AUDIO menu
KV-20S90 only
MTS
Multi-Channel
TV Sound
Multi-Channel
TV Sound
STEREO:
Select when viewing a broadcast in stereo.
SAP:
Listen to bilingual or other Second Audio Programs
(SAP).
MONO:
MONO:
Select to reduce noise in areas with poor reception.
If your TV is set to SAP, all non-SAP programs will be muted. If your TV does
not have sound, check your AUDIO settings.
not have sound, check your AUDIO settings.
For direct MTS settings, press the
button on your remote control.
Using the Menus
15
Using the TIMER
menu
Except KV-13M42
DAYLIGHT
SAVING
SAVING
YES:
Select in spring to compensate for Daylight Savings.
NO:
Select in fall at the end of Daylight Savings.
CURRENT
TIME SET
TIME SET
With the menu open:
1
1
Press
.
2
Press
F or f to cycle through the days, then press
.
3
Press
F or f until the current hour is displayed, then
press
.
4
Press
F or f until the current minute is displayed, then
press
.
ON/OFF TIMER
Scheduled
viewing
Scheduled
viewing
CURRENT TIME SET must be programmed before the
ON/OFF TIMER is available.
With the menu open:
1
ON/OFF TIMER is available.
With the menu open:
1
Press
.
2
Press
F or f until the desired day or range of days is
displayed, then press
.
3
Indicate the time that you want the TV to turn on by
pressing
pressing
F or f and the
, (for hour and minutes).
4
Press
F or f to set the duration, up to 6 hours, then press
.
5
Press
F or f to set the channel and press
.
When you perform AUTO PROGRAM, all ON/OFF TIMER settings will be
cleared.
cleared.
Any loss of power will cause the ON/OFF TIMER settings to be cleared.
When the ON/OFF TIMER is programmed, the light on the front of your TV will
be turned on.
be turned on.
16
Operating Instructions
Using the SET UP
menu
PARENTAL
CONTROL
CONTROL
The PARENTAL CONTROL feature provides parents several
options for programming the TV to block shows based on their
rating, (see page 18).
options for programming the TV to block shows based on their
rating, (see page 18).
FAVORITE
CHANNEL
Quick access
to favorite
channels
CHANNEL
Quick access
to favorite
channels
With the FAVORITE CHANNEL menu open:
1
1
Press
.
2
Use the
F or f buttons to select AUTO or MANUAL,
(selecting AUTO will display the last five channels accessed
by the
by the
buttons).
3
Select the position (1-5) where you want to program a
channel. Then press
channel. Then press
.
4
Using the
F or f buttons, select the desired channel.
5
Press
, the TV will change to the channel entered.
CAPTION
VISION
Closed-
captioning
VISION
Closed-
captioning
CC1, 2, 3, 4:
Displays printed dialogue and sound effects of a
program.
TEXT1, 2, 3, 4:
TEXT1, 2, 3, 4:
Displays network/station information.
XDS
(Extended Data Services): Displays information about the
network and current program, if available.
LANGUAGE
Display all menus in your language of choice.
1
1
Point cursor at LANGUAGE and press
.
2
Using the
F or f buttons, highlight the desired language and
press
.
0
9
To use FAVORITE CHANNEL, exit all menus and press
. A window picture
will display your favorite channel numbers. Move the cursor to a channel
number and press
to view.
Press the
button to activate your CAPTION VISION setting.
Using the Menus
17
CHANNEL SET UP menu
CABLE
ON:
Select if you are receiving cable channels with a CATV
cable.
OFF:
OFF:
Select if you are using an antenna.
CHANNEL FIX
2-6:
Select when you want to control all channel selection
through a cable box. Select the appropriate channel
(usually 3 or 4) and use the cable box’s remote control for
channel selection.
VIDEO:
(usually 3 or 4) and use the cable box’s remote control for
channel selection.
VIDEO:
Select from available inputs when you have
connected video equipment (e.g. satellite receiver) and you
want your TV fixed to it.
want your TV fixed to it.
AUTO
PROGRAM
PROGRAM
Run AUTO PROGRAM whenever setting up your TV. It
will cycle through all available channels and program any
receivable channels.
will cycle through all available channels and program any
receivable channels.
CHANNEL
SKIP/ADD
SKIP/ADD
Use this feature after you run AUTO PROGRAM to skip
unwanted channels or add new ones.
1
unwanted channels or add new ones.
1
Use the
or CH +/- buttons to access the desired
channel.
2
Press
i
to SKIP or ADD (only one option will be
available).
After changing your CABLE settings, you will need to run AUTO PROGRAM.
FAVORITE CHANNEL cannot be used when CHANNEL FIX is set.
0
9
Click on the first or last page to see other KV-20S90 service manuals if exist.