Sony KV-20S90 Service Manual ▷ View online
Connecting Your TV
5
TV and Cable Box
1
Connect the coaxial cable from your cable service to the IN jack on
your cable box.
your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
cable box to the VHF/UHF IN jack on the TV.
cable box to the VHF/UHF IN jack on the TV.
To view channels from your cable box, tune your TV to channel 3 or 4 (as set
on the rear panel of your cable box) and use the cable box’s remote control to
change channels.
on the rear panel of your cable box) and use the cable box’s remote control to
change channels.
If you will be controlling all channel selection through your cable box, you
should consider using the CHANNEL FIX feature by setting your TV to channel
3 or 4, (see page 17).
should consider using the CHANNEL FIX feature by setting your TV to channel
3 or 4, (see page 17).
Rear of TV
Cable Box
6
Operating Instructions
TV, VCR, and Cable box
1
Connect the coaxial cable from your cable service to the IN jack on
your cable box.
your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
cable box to the IN jack on your VCR.
cable box to the IN jack on your VCR.
3
Connect a coaxial cable (not supplied) from OUT on your VCR to
VHF/UHF jack on your TV.
VHF/UHF jack on your TV.
Optional Connection
If your VCR is equipped with video outputs, you can get better picture
quality by connecting Audio/Video cables (not supplied) from AUDIO
and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
quality by connecting Audio/Video cables (not supplied) from AUDIO
and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
If you will be controlling all channel selection through your cable box, you
should consider using the CHANNEL FIX feature by setting your TV to channel
3 or 4, (see page 17).
should consider using the CHANNEL FIX feature by setting your TV to channel
3 or 4, (see page 17).
You can use the
button to switch between the VHF/UHF and VIDEO
inputs.
OUT
IN
3
Rear of TV
VCR
Cable Box
Connecting Your TV
7
Connecting a Camcorder
Using Audio/Video cables (not supplied), connect AUDIO and VIDEO
OUT on your camcorder to AUDIO and VIDEO IN on your TV.
OUT on your camcorder to AUDIO and VIDEO IN on your TV.
Connecting Headphones
Connect your headphones to the
jack on the front of your TV.
For model KV-13M42, this connection can be made to the Audio/Video input
located on the rear of the TV.
located on the rear of the TV.
Front A/V Panel
A/V output
L
(MONO)
-AUDIO-R
VIDEO
VIDEO
INPUT
Front A/V Panel
9
Using the Remote Control and Basic Functions
Using the Remote Control and
Basic Functions
This section shows you how to use more advanced buttons on the remote control
and how to use the on-screen menus.
and how to use the on-screen menus.
.
Button
Description
Press when you want to turn the TV on
and off.
and off.
Turns the TV off automatically in
approximately 30, 60 or 90 minutes. Cancel
by pressing until SLEEP OFF appears.
approximately 30, 60 or 90 minutes. Cancel
by pressing until SLEEP OFF appears.
Instantly turns off the sound. Press again
or press
or press
to restore sound.
Cycles through the available video inputs.
Press once to show current time, (if set)
and channel number. Press again to
activate CAPTION VISION settings, if
available. To cancel, press again until
DISPLAY OFF appears.
and channel number. Press again to
activate CAPTION VISION settings, if
available. To cancel, press again until
DISPLAY OFF appears.
Cycles through the Multi-Channel TV
Sound (MTS) options: STEREO, SAP
(Second Audio Programming) and
MONO, (KV-20S90 only).
Sound (MTS) options: STEREO, SAP
(Second Audio Programming) and
MONO, (KV-20S90 only).
Press for channel selection, the channel
will change after 2 seconds.
will change after 2 seconds.
Press after selecting a channel using the
buttons to immediately activate
selection.
Alternates back and forth between the last
two channels selected with the
two channels selected with the
buttons.
Displays the on-screen menu. Press again
to exit the menu at any time.
to exit the menu at any time.
Activates highlighted selections in the
on-screen menu.
on-screen menu.
The remote control shown (RM-Y155) is for KV-20S90. For KV-13M42 and
KV-20M42 models, your remote control does not have the MTS button.
KV-20M42 models, your remote control does not have the MTS button.
JUMP
ENTER
SLEEP
POWER
MUTING
MTS
CH
VOL
RESET
SELECT
MENU
RM-Y155
TV
0
9
0
9
0
9
Click on the first or last page to see other KV-20S90 service manuals if exist.