DOWNLOAD Sony KP-51DS1U Service Manual ↓ Size: 14.76 MB | Pages: 112 in PDF or view online for FREE

–

 17 

–

Menu System

This feature enables you to prevent undesirable broadcasts appearing on the screen. We suggest you use this function to
prevent children from watching programmes you consider unsuitable.

Press the MENU button on the remote control to display the menu
on the screen.

Push the joystick to 

$ to select the 

 symbol, then push to 

z to

enter to the PRESET menu.

Push the joystick to 

$ or 4 to select Parental Lock, then push to z.

Push the joystick to 

$ or 4 to select the programme number with

the channel you wish to block, then press the OK button.

The 

 symbol appears before the programme position to

indicate this programme is now blocked.
To unblock the programme, press the OK button again. The 
symbol disappears.

Repeat step 4 if you wish to block other channels.

Press the MENU button to exit and return to the normal TV screen.

S

RM 892

PROGR

MENU

VIDEO

TV

S

RM 892

PROGR

MENU

VIDEO

TV

Menu System

You can programme this projection TV to skip any unwanted programme numbers when they are selected with the
PROGR +/- buttons. To cancel this function afterwards, proceed in the same way as described below by selecting the
appropriate TV system (I or DIG) instead of "- - -" in step 5.

Press the MENU button on the remote control to display the menu
on the screen.

Push the joystick to 

$ to select the 

 symbol, then push to 

z to

enter to the PRESET menu.

Push the joystick to 

$ or 4 to select Manual Programme Preset,

then push to 

z.

Push the joystick to 

$ or 4 to select the programme position you

want to skip, then push to 

z to enter to the SYS column.

Push the joystick to 

$ to select “- - -”, then press the OK button to

store.

Repeat steps 4 and 5 to skip other unused programme positions.

Press the MENU button to exit and return to the normal TV screen.

–

 18 

–

S

RM 892

PROGR

MENU

VIDEO

TV

Menu System

Names for analogue channels (TV Broadcasts) are usually taken automatically from Teletext if available. You can however
name a channel  or an input video source using up to five characters (letters or numbers). Using this function, you can
easily identify which channel (TV Broadcasts) or video source you are watching.

Press the MENU button on the remote control to display the menu
on the screen.

Push the joystick to 

$ to select the 

 symbol, then push to 

z to

enter to the PRESET menu.

Push the joystick to 

$ or 4 to select Manual Programme Preset,

then push to 

z.

Push the joystick to 

$ or 4 to select the programme number with

the analogue channel you wish to name.

Push the joystick to 

z repeatedly until the first element of the

 column is highlighted.

Push the joystick to 

$ or 4 to select a letter or number (select “-” for

a blank), then push to 

z to confirm this character. Select the other

four characters in the same way.

After selecting all the characters, press the OK button.

Repeat steps 4 to 7 if you wish to label other channels.

Press the MENU button to exit and return to the normal TV screen.

With this feature you can view subtitles (if available) on the TV screen when watching digital channels. When watching
analogue channels you can view subtitles via teletext.

Press the MENU button on the remote control to display the menu
on the screen.

Push the joystick to 

$ to select the 

 symbol, then push to 

z to

enter to the PRESET menu.

Push the joystick to 

$ or 4 to select Digital Subtitles, then push to

z .

Push the joystick to 

Z or z to select the language in which you wish

the subtitles to appear. You can choose from English, Welsh or
Gaelic

.

      When you wish to cancel subtitles, set to Off.

Press the OK button to confirm your selection.

Press the MENU button to exit and return to the normal TV screen.

Menu System

S

RM 892

PROGR

MENU

VIDEO

TV

–

 19 

–

S

RM 892

PROGR

MENU

VIDEO

TV

Press the MENU button on the remote control to display the menu
on the screen.

Push the joystick to 

$ to select the

 

 

 symbol, then push to 

z

button to enter to the VIDEO CONNECTION menu screen.

Push the joystick to 

$ or 4 button to highlight:

 (input source for the TV screen) or

(output source available for 

:2 and :3 Euro AV

connectors).

Push the joystick to 

z to confirm.

Push the joystick to 

Z or z repeteadly to select the desired source:

TV Screen TV, AV1, RGB, AV2, YC2 or AV3

Output

 or AUTO

Then press the OK button to confirm.

If you select "AUTO", the output signal will always be the same
one that is displayed on the screen.

If you have connected a decoder, please remember to change
back the Output to "TV" for correct unscrambling.

Press the MENU button to exit and return to the normal TV screen.

  The selected signal is available for your optional equipment connected to

Menu System

Using this function you can record on your VCR any signal coming from an external equipment connected to the Euro AV
connectors 

:2 or :3 placed on the rear of the projection TV.

In that case you have to select the output source as described below (if your VCR support Smartlink, this procedure is not
necessary).

Press the MENU button on the remote control to display the menu
on the screen.

Push the joystick to 

$ to select the 

 symbol, then push to 

z to

enter to the PRESET menu screen.

Push the joystick to 

$ or 4 to select AV Label Preset, then push

to 

z.

Push the joystick to 

$ or 4 to select the input source you wish to

name (eg AV2), then push to 

z to highlight the first element of the

 column.

Push the joystick to 

$ or 4 to select a letter or number (select “-” for

a blank) then push to 

z to confirm this character. Select the other

four characters in the same way.

After selecting all the characters, press the OK button.

Repeat steps 4 to 6 if you wish to label other input sources.

Press the MENU button to exit and return to the normal TV screen.

  Whenever the equipment with the labeled input is selected for use, the

Menu System

This function enables you to designate a name to the optional equipment you have connected to the sockets of this
projection TV. This name can be up to 5 characters (letters or numbers).

S

RM 892

PROGR

MENU

VIDEO

TV

–

 20 

–

Press the 

 button on the remote control to display the electronic

programme guide (EPG) on the screen.

You may see the message "EPG INFORMATION IS
TEMPORARILY UNAVAILABLE" whilst waiting for the EPG
to appear on screen.

Push the joystick to 

$, 4, Z or z to move the on-screen cursor

around the guide.

Press the 

 button again to exit and return to the normal TV

screen.

You can alter the type of information presented on the EPG by
changing data in each of the EPG columns. You can for example
display information for all sports programmes being shown
tomorrow from 5.00pm onward.

Press the 

 button on the remote control to display the EPG on the

TV screen.

Push the joystick to 

Z or z to highlight the date column, then push

to 

4 or $ to select your chosen date.

Push the joystick to 

Z or z to highlight the time column, then push

to 

4 or $ to select your chosen time.

Press the OK button. The EPG will display programme information
according to the date and time you selected.

Push the joystick to 

z to highlight programme type column, then

push to 

4 or $ to select   Films, 

 News, 

 Lifestyle, 

 Sport,

 Children Programmes,     Entertainment or 

 Education.

Push the joystick to 

Z or z to update the programme information

accordingly. If you selected tomorrow's date, 17:00 and 

 Sport,

you should now be able to view all the sports programmes being
shown tomorrow from 5.00 pm onwards.

Press the 

 button to exit and return to the normal TV screen.

The electronic Programme Guide (EPG) is a guide which provides programme information for all digital channels
supporting EPG. When looking for information you can search by theme (sports, art, etc.), date or time (e.g. broadcasts
between 8 and 9 pm). When you have found a programme you can go directly to this programme, use the timer to remind
you of it or preset your VCR with Smartlink.

Electronic Programme Guide (EPG)

S

RM 892

PROGR

MENU

VIDEO

TV

 

 

 

2

4

5

1

3

1

1

3

4

– –

12

12

 

 

 

2

4

5

1

3

1

1

3

4

– –

12

12

Press the 

 button on the remote control to display the programme

guide on the screen.

Push the joystick to 

Z or z to highlight the programme column,

then push to 

4 or $ to select your desired programme.

Press the OK button. If the programme is currently being broadcast,
it will be displayed on your TV. If not, the TIMER menu will be
displayed on the TV screen.

At the bottom of the timer page you can see the symbols
(back to EPG),                (to record a programme) or              (to set the
programme to switch on automatically).

Push the joystick to 

Z or z to select one of these symbols then press

the OK button to confirm your selection. The EPG appears on
screen with the relevant icon appearing next to the programme you
selected in step 2.

If you wish to cancel a recording, select the relevant programme and
press the OK button. A menu is displayed on screen requesting you
to select Return if you wish to continue to record the programme or
Delete

 if you wish to cancel the recording request.

After making your selection, press the OK button to confirm. The
record icon disappears from the EPG if Delete was selected in step
6.

If you have finished viewing programmes on your TV, press the TV

  button before the timer recording starts to leave your projection

TV in standby mode for the timer settings to be activated. If,
however, you wish to continue watching other programmes after
setting the timer, you can do so by changing programmes in the
normal way. If you are watching another programme when the
timer is due to start, a display will appear on screen advising you
that, if you change channels, you automatically cancel the
recording.

If you do not wish to cancel or view the recording, press the TV 
button whilst one of the displays are still on screen to leave your
projection TV in standby mode. The standby indicator on the front
of the set will flash to show that the timer record operation is active.
If, however, you choose to change programmes, you automatically
cancel the recording.

Notes: • If your video recorder (VCR) is not Smartlink-compatible,

you will need to set your VCR to switch on and off
automatically after setting the timer on the EPG.

• If you want to change channel once a digital programme has

started recording, select the channel by using the remote
control buttons as normal. The message "STOP
RECORDING" will be displayed on screen. Either do nothing
to allow the recording to continue or select the required
channel once more while the message is still displayed on
screen. The recording will then be cancelled.

Electronic Programme Guide (EPG)

S

RM 892

PROGR

MENU

VIDEO

TV

Return

Event Rec

Wake up

 

 

 

2

4

5

1

3

1

1

3

4

12

12

12

12