DOWNLOAD Sony KP-44PX2 / KP-44PX2U Service Manual ↓ Size: 29.34 MB | Pages: 96 in PDF or view online for FREE

In it’s default condition this remote control will operate the basic functions of this Sony TV, Sony DVDs and most Sony VCRs. To 

control VCRs and DVDs of other manufacturers (and some Sony VCR models), please complete the following steps:

• Before you start, look up the 3 digit code for your brand of DVD or VCR from the list below. On those brands that have 

more than one code, enter the first code number.

• Sony will endeavour to update the software according to market changes. Therefore, please refer to code table included 

with the remote control for latest code set.

Press the Media Selector button on the remote control repeatedly until the required green light (VCR 

or DVD) is lit.

   If Media Selector is on TV position, code numbers will not be stored.

Before the green light goes out, press and hold the yellow button for approximately 6 seconds until the 

green light starts flashing.

Whilst the green light is flashing, enter all three digits of the code for your brand of VCR or DVD using 

the number buttons on the remote control. 

 If your selected code is entered correctly, all three green lights will be lit momentarily.

Turn on your VCR or DVD and check that the main functions work.

• If your device is not working or some of the functions do not work please check that you entered 

the correct code set or try the next code listed against the brand. 

• Your brand codes may be lost if weak batteries are not replaced within a few minutes. To reset 

your brand of DVD or VCR please repeat the above steps. A small label is added inside the 

battery door to allow you to record your brand codes.

• Not all brands are covered and not all models of every brand may be covered.

SONY (VHS)

301, 302, 303, 308, 309

SONY

001

SONY (BETA)

303, 307, 310

AIWA

021

SONY (DV)

304, 305, 306

DENON

018, 027, 020, 002

AIWA

325, 331, 351

GRUNDIG

009, 028, 023, 024, 016, 003

AKAI

326, 329, 330

HITACHI

025, 026, 015, 004

DAEWOO

342, 343

JVC

006, 017

GRUNDIG

358, 355, 360, 361, 320, 351

KENWOOD

008

HITACHI

327, 333, 334

LG

015, 014

JVC

314, 315, 322, 344, 352, 353, 354, 348, 349 

LOEWE

009, 028, 023, 024, 016, 003

LG

332, 338

MATSUI

013, 016

LOEWE

358, 355, 360, 361, 320, 351

ONKYO

022

MATSUI

356, 357

PANASONIC

018, 027, 020, 002

ORION

328

PHILIPS

009, 028, 023, 024, 016, 003

PANASONIC

321, 323

PIONEER

004

PHILIPS

311, 312, 313, 316, 317, 318, 358, 359 

SAMSUNG

011, 014

SAMSUNG

339, 340, 341, 345

SANYO

007

SANYO

335, 336

SHARP

019, 027

SHARP

324

THOMSON

012

THOMSON

319, 350

TOSHIBA

003

TOSHIBA

337

YAMAHA

018, 027, 020, 002

For the best picture quality, try to position the projection TV so that you can view the screen from within the areas shown
below.

20º

20º

60º

60º

minimum distance 1.7 m

(Optimum viewing position)

(Optimum viewing position)

minimum distance 1.7 m

TV system: 
Depending on your country selection:
B/G/H, D/K, L, I

Colour system:
PAL
SECAM, NTSC 3.58, 4.43 (only Video In)

Channel Coverage:
VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K: R1-R12, 

R21-R69

L:

F-2F-10, B-Q, F21-F69

I:

UHF B21-B69

Projected picture size:
44” (approx. 112 cm. measured diagonally)

/

21-pin scart connector (CENELEC standard)  

including audio/video input, RGB input, TV 

audio/video output.

/

  21-pin Scart connector (CENELEC standard)  

including audio / video input, RGB input, 

monitor audio/video output.

 

/

  21-pin Scart connector (CENELEC standard) 

including audio / video input, S video input,

 

selectable audio / video output and Smartlink 

interface.

     

audio outputs (Left/Right) - phono jacks 

S Video input – 4 pin DIN

   video input – phono jack

   audio input – phono jacks

       

headphones jack 

2 x 30 W (music power)
2 x 15 W (RMS)

Power Consumption:
225 W

Standby Power Consumption:
< 0.7 W 

Dimensions (w x h x d) :
approx. 1100 x 1160 x 536 mm.

Weight:
approx. 61 Kg.

Accessories supplied:
1 Remote Control (RM-938)
2 Batteries (IEC designated, AA size) 

Other features:
•Digital Comb Filter (High resolution).
• 100 Hz picture, Digital Plus.
• Teletext, Fastext, TOPtext (250 page 

TEXT  memory).

• NICAM.
• Sleep Timer.
• SmartLink (direct link between your  

projection TV set and a compatible VCR. 
For more information on SmartLink, 
please refer to the Instruction Manual of 
your VCR).

• TV system autodetection.
• Dolby Virtual.
• BBE.
• PIP.
• Auto Format.
• ACI (Auto Channel Installation).

S

S

  (SMARTLINK)

 

 

Here are some simple solutions to problems which may affect the picture and sound.

If you continue to experience problems, have your projection TV serviced by qualified personnel.

 

Never open the casing yourself.

No picture (screen is dark) and no sound.

Poor or no picture (screen is dark), but good 
sound.

No picture or no menu information from 
equipment connected to the Scart connector.

Good picture, no sound.

No colour on colour programmes.

When you switch on the TV the last channel 
you were watching before switching the TV 
off does not appear.

Undefined picture with different colour on 
the outlines of the images.

Noisy picture when viewing a TV channel.

No unscrambling or unstable picture whilst 
viewing a scrambled channel with a decoder 
connected through the Scart connector  

/

.

Distorted picture when changing 
programmes or selecting teletext.

Wrong characters appear when viewing 
teletext.

Wrong characters appear when viewing 
NexTView.

Brightness level of the picture is notoriously 
decreased when viewing a teletext page.

Remote control does not function.

The standby indicator 

 on the projection  

TV flashes.  

S

• Check the aerial connection.
• Plug the TV in and press the 

 button on the front of the projection TV. 

• If the standby indicator 

 is on, press TV 

 button on the remote control. 

• Using the menu system, select the “Picture Adjustment” menu and select “Reset” to 

return to the factory settings.

• Check that the optional equipment is on and press the 

 button repeatedly on the 

remote control until the correct input symbol is displayed on the screen. 

• Press the  

 + button on the remote control. 

• Check that “TV Speakers” is “On” in the “Sound Adjustment” menu.
• Check that headphones are not connected.

• Using the menu system, select the “Picture Adjustment” menu and select “Reset” to 

return to factory settings.

• This is not a malfunction. Press the number buttons on the remote control to select the 

desired channel.

• Adjust the colour registration. For more details, please refer to “Adjusting Colour 

Registration (Convergence)” section on page 10.

• Using the menu system, select the “Manual Programme Preset” menu and adjust Fine 

Tuning (AFT) to obtain better picture reception.

• Using the menu system, select the “Noise Reduction” option in the “Picture 

Adjustment” menu and select “Auto” to reduce the noise in the picture.

• Using the menu system, select the “Features” menu. Then enter to “Detail Set Up” 

option and set “AV3 Output” to “TV”.

• Check that the Decoder is not connected on the scart 

/

.

• Turn off any equipment connected to the Scart connector on the rear of the projection 

TV.

• Using the menu system, enter to the “Language/Country” menu and select the 

country in which you operate the projection TV set. For Cyrillic languages, we 
recommend to select Russia country in the case that your own country does not 
appear in the list.  

• Use the menu system to enter the “Language/Country” menu (see page 14) and select 

the same language that NexTView is broadcast in.

• This is not a malfunction. After 5 minutes viewing the same teletext page and without 

any button being pressed, the projection TV automatically decreases the brightness 
level to avoid any damage to the picture tube. To reset the brightness level, press any 
button of the remote control.

• Check that the Media Selector on the remote control is set  to the device you are using 

(VCR, TV or DVD).

• If the remote control does not operate the VCR or DVD even when the Media Selector 

has been set correctly. Enter the necessary code set as explained in the “Remote 
Control Configuration for VCR/DVD” chapter on page 23.

• Replace the batteries.

• Contact your nearest Sony service centre.