DOWNLOAD Sony KP-43T70 / KP-46C70 / KP-48S70 / KP-53N74 / KP-53S70 / KP-61S70 Service Manual ↓ Size: 9.41 MB | Pages: 99 in PDF or view online for FREE

– 9 –

The operating instructions mentioned here are partial abstracts from the
Operating Instructions Manual. The page numbers of the Operating
Instruction Manual remain as in the manual. (Part no : 3-866-565-11)

Names of the buttons on the remote control are
presented in different colors to represent the
available functions.

Transparent .... Press to select the component

you want to control; e.g. VTR
(VCR)/MDP/DVD Player,
SAT (satellite receiver)/
CABLE, or projection TV.

Green ............... Buttons relevant to power

operations, like turning the
projection TV, SAT/CABLE, or
VTR (VCR)/MDP/DVD Player
on or off

White ............... TV/VTR (VCR)/MDP/DVD

Player/SAT (satellite
receiver)/CABLE operation
buttons

Yellow .............. PIP operation buttons
Blue .................. SAT operation buttons
Green ............... S-Link operation buttons
Pink .................. DVD Player operation buttons

m

N

M

x

z

X

V

v

B

b

• Operate the projection TV only on 120 V

AC.

• The plug is designed, for safety purposes,

to fit into the wall outlet only one way. If
you are unable to insert the plug fully
into the outlet, contact your dealer.

• If any liquid or solid object should fall

inside the cabinet, unplug the projection
TV immediately and have it checked by
qualified service personnel before
operating it further.

• If you will not be using the projection TV

for several days, disconnect the power by
pulling the plug itself. Never pull on the
cord.

Clean the cabinet of the projection TV with a
dry soft cloth.  To remove dust from the
screen, wipe it gently with a soft cloth.
Stubborn stains may be removed with a cloth
slightly dampened with solution of mild
soap and warm water.  Never use strong
solvents such as thinner or benzine for
cleaning.

If the picture becomes dark after using the
projection TV for a long period of time, it
may be necessary to clean the inside of the
projection TV. Consult qualified service
personnel.

• To prevent internal heat buildup, do not

block the ventilation openings.

• Do not install the projection TV in a hot

or humid place, or in a place subject to
excessive dust or mechanical vibration.

• Avoid operating the projection TV at

temperatures below 5° C (41° F).

• If the projection TV is transported

directly from a cold to a warm location,
or if the room temperature changes
suddenly, the picture may be blurred or
show poor color. In this case, please wait
a few hours to let the moisture evaporate
before turning on the projection TV.

• To obtain the best picture, do not expose

the screen to direct illumination or direct
sunlight. It is recommended to use spot
lighting directed down from the ceiling
or to cover the windows that face the
screen with opaque drapery. It is
desirable to install the projection TV in a
room where the floor and walls are not of
a reflective material.

– 10 –

Carrying the projection TV requires three or
more people.

The projection TV has been equipped with
casters for easy movement on a hard surface.
Please move your projection TV using the
casters.

°

°

°

°

°

You may find it necessary to use some of the
following connector types during set up.

Standard TV cable and antenna cable

High quality video cable for enhanced
picture quality

Video - Yellow
Audio (Left) - White
Audio (Right) - Red

Some DVD Players and DTV Receivers are
equipped with the following three video
connectors.

Y - Green
P

B

 (C

B

, C

b

 or B–Y) - Blue

P

R

 (C

R

, C

r

 or R–Y) - Red

Screw into connection.

Push into connection.

Align guides and
push into connection.

Push into connection.

Sony cable for CONTROL S connection. This
feature is exclusive to Sony products and
allow greater control of all Sony equipment.

To control other Sony equipment with the
projection TV’s remote control, connect the
CONTROL S IN jack of the equipment to the
CONTROL S OUT jack on the projection TV
with the CONTROL S cable.

Push into connection.

The connection you choose will depend on
the cable found in your home. Newer homes
will be equipped with standard coaxial cable
(see 

); older homes will probably have 300 -

ohm twin lead cable (see 

); still other

homes may contain both (see 

).

Use 75-ohm coaxial cable for improved
picture quality (see 

).

– 11 –

This is the simplest connection. Connection is
made directly from the cable or antenna to
the projection TV.

You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.

Select Cable or ANT mode by pressing ANT
on the remote control.

Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
Also, set “Cable” to “On” in the Channel Set
Up menu (page 27).

Some pay cable TV systems use scrambled or
encoded signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.)

For this set up, you can switch between
scrambled channels (through your cable
box), and normal (CATV) channels by
pressing ANT on your remote control.

• You may be able to program your Sony

remote control to operate your cable box.
(see “Operating a Cable Box or Satellite
Receiver (SAT)” on page 45)

• During PIP or Favorite Channel viewing,

the AUX input can only be viewed in the
main picture.

Attach the coaxial cable from the
incoming cable connection or antenna to
VHF/UHF IN on the VCR.

Using a coaxial cable, connect VHF/UHF
OUT on the VCR to VHF/UHF on the
projection TV.

Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right**).

Connect the single (input) jack of the
splitter to the incoming cable connection,
and connect the other two (output) jacks
(using the coaxial cable) to IN on the cable
box and VHF/UHF on the projection TV.

Using a coaxial cable, connect OUT on the
cable box to VHF/UHF IN on the VCR.

Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right**).

– 12 –

• To view scrambled channels through the

cable box, select the video input which the
cable box is connected to by pressing TV/
VIDEO.

* If your VCR is not equipped with S VIDEO, use a

VIDEO cable (yellow) instead of the S VIDEO
cable.

** If you are connecting a monaural VCR, connect

only the single audio output to the left (MONO)
input on the projection TV.

Connect the cable from the satellite
antenna to the satellite receiver.

Attach the coaxial cable from the incoming
cable connection or antenna to VHF/UHF
on the projection TV.

Using AUDIO and S VIDEO cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the projection TV (White-AUDIO
Left, Red-AUDIO Right).

• To view input from the satellite receiver,

select the video input which the satellite
receiver is connected to by pressing TV/
VIDEO on the remote control.

Connect the cable from the satellite
antenna to the satellite receiver.

Attach the coaxial cable from the
incoming cable connection or antenna to
VHF/UHF IN on the VCR.

Using a coaxial cable, connect VHF/UHF
OUT on the VCR to VHF/UHF on the
projection TV.

Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the VCR.

Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right).

If your VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO
cable.

• To view input from the satellite receiver or

VCR, select the video input which your
satellite receiver or VCR is connected to
by pressing TV/VIDEO on the remote
control.