DOWNLOAD Sony KP-41T65K / KP-41T65T / KP-48V75K / KP-53S65T / KP-53V75K Service Manual ↓ Size: 13.43 MB | Pages: 120 in PDF or view online for FREE

– 5 –

After making these connections, you will be able to do
the following:
• View the playback of video tapes
• Record one TV program while viewing another

program

• Watch two TV programs at once using PIP

For details on connection, see your VCR instruction
manual.
Before making the connection, disconnect the AC
power cords of the equipment to be connected.

• To connect a monaural VCR, connect the audio output of the

VCR to AUDIO-L (MONO) of VIDEO 1/3 IN on the projection
TV.

AUDIO VIDEO

LINE

OUT

OUT

IN

OUT

IN

OUT

AUDIO VIDEO

LINE

OUT

IN

If your VCR has an S VIDEO output connector, make
the following connections.
Whenever you connect the cable to the S VIDEO input
connector, the projection TV automatically receives S
video signals.

• Video signals are composed of Y (luminance) and C (chroma)

signals. The S connection sends the two signals separately
preventing degradation, and gives better picture quality
compared to conventional connections.

OUT

IN

AUDIO VIDEO S VIDEO

LINE

OUT

AUDIO VIDEO S VIDEO

LINE

OUT

OUT

IN

OUT

IN

– 6 –

For details on connection, see the instruction manual of
the DBS (Digital Broadcasting Satellites) receiver.

• You can use the S VIDEO connector or the composite video

connector for the video connection.

S VIDEO

AUDIO VIDEO

VHF/UHF

OUT

IN

LINE IN

LINE OUT

S VIDEO

AUDIO VIDEO

VHF/UHF

OUT

IN

LINE IN

LINE OUT

S VIDEO

AUDIO VIDEO

VHF/UHF

OUT

IN

LINE IN

LINE OUT

Use this connection to view a camcorder picture.

• To connect a monaural camcorder, connect the audio output of

the camcorder to AUDIO-L (MONO) of VIDEO 2 INPUT on
the projection TV.

When connecting audio equipment, see page 

 for

more information.

• You can adjust the bass, treble, and balance, or select surround

(page 

) or an MTS (Multichannel TV Sound) mode (page 

)

with the supplied remote control.

• To connect a camcorder equipped with the S video output,

connect the S video output of the camcorder to the S VIDEO
connector of the projection TV.

– 7 –

Connect an optional AV receiver to the VIDEO 1 IN
jacks at the rear of the projection TV.

If your AV receiver has the TV input jacks, connect
them to the TV OUT jacks at the rear of the projection
TV.

You can record input images displayed on the screen.
This type of connection should be used only when you
connect from the line input of one VCR, and from the
line output of a second VCR.

• Do not change the input signal while editing through

MONITOR OUT, or the output signal will also change.

• You can use the S video jack to connect a VCR for playback

and the composite video connector to connect a VCR for
recording.

• When connecting a single VCR to the projection TV, do not

connect the MONITOR OUT to the VCR’s line input, while at
the same time connecting from the projection TV’s VIDEO IN
connectors to the VCR’s line output, as shown below.

AUDIO VIDEO

LINE
OUT

OUT

IN

AUDIO VIDEO

LINE
IN

OUT

IN

LINE

IN

OUT

MONITOR
OUT

VIDEO IN

VCR

– 8 –

Connect VIDEO 1/3 connectors on the projection TV to
line output connectors on the DVD player.

• Connect your DVD player directly to your TV. Connecting the

DVD player through other video equipment will cause
unwanted picture noise.

• If your DVD player does not have S video output connector,

use composite video connector for the video connection.

• Video signals are composed of Y (luminance) and C (chroma)

signals. The S connection sends the two signals separately
preventing degradation, and gives better picture quality
compared to conventional connections.

• Because the high quality pictures on a DVD disc contain a lot of

information, picture noise may appear. In this case, reduce the
SHARPNESS level in the VIDEO menu (see SHARPNESS on
page 

).

LINE OUT

S VIDEO OUT

COMPONENT VIDEO OUT

S-LINK

DIGITAL OUT

OPTICAL

COAXIAL

R - A U D I O   1 - L

VIDEO

Y

C

B

C

R

Component video terminals Y/C

B

/C

R

 provide a

sharper, higher resolution picture by reducing the
amount of signal processing thus creating a more
accurate reproduction of the source.
If your DVD player has component video output
connectors, connect them to VIDEO 4 IN on the
projection TV in the following way.

• Connect your DVD player directly to your TV. Connecting the

DVD player through other video equipment will cause
unwanted picture noise.

• When the DVD player is connected using VIDEO 4 IN, its

MONITOR OUT signals cannot be output.

• Some DVD player connectors may be labeled Y, B-Y, and R-Y.

In this case, connect Y (green) on the projection TV to Y on the
DVD player, C

B

 (blue) to B-Y, and C

R

 (red) to R-Y.

• The jacks of this projection TV are colored in green (Y), blue

(C

B

), and red (C

R

). If line output connectors of your DVD player

have different colors, make connections according to their
labels.

• Because the high quality pictures on a DVD disc contain a lot of

information, picture noise may appear. In this case, reduce the
SHARPNESS level in the VIDEO menu (see SHARPNESS on
page 

).

• If the incorrect colors appear when using this component video

input, recheck the connections they may be reversed.

LINE OUT

S VIDEO OUT

COMPONENT VIDEO OUT

S-LINK

DIGITAL OUT

OPTICAL

COAXIAL

R - A U D I O   1 - L

VIDEO

Y

C

B

C

R