Sony KP-41T65K / KP-41T65T / KP-48V75K / KP-53S65T / KP-53V75K Service Manual ▷ View online
– 13 –
23
-EN
Getting Started
EN
6
To erase and/or add other channels, repeat
step 5.
step 5.
7
Press MENU to return to the original screen.
Notes
• If you erase or add a VHF or UHF channel, the cable TV
channel with the same number is also erased or added, and
vice versa.
vice versa.
• Erasing and adding channels is also available for the AUX
input.
Adjusting convergence
(CONVERGENCE)
(CONVERGENCE)
The projection tube image appears on the screen in
three layers (red, green and blue). If they do not
converge, the color is poor and the picture blurs. To
correct this, adjust convergence.
You do not have to do this procedure if you perform
AUTO SET UP (page
three layers (red, green and blue). If they do not
converge, the color is poor and the picture blurs. To
correct this, adjust convergence.
You do not have to do this procedure if you perform
AUTO SET UP (page
21
). Do this procedure only
when you want to adjust it manually.
1
Press MENU.
2
Press
V
or
v
to select
, and press
.
3
Press
V
or
v
to select CONVERGENCE, and
press
.
The CONVERGENCE adjustment screen appears.
Us e
RETURN
E x
MENU
i t
RED
BLUE
MENU
BLUE
MENU
CONVERGENCE
+
+
+
R
G
B
B
G
R
R=Red
G=Green
B=Blue
G=Green
B=Blue
MENU
4
Press
V
or
v
to select CHANNEL ERASE/ADD,
and press
.
The CHANNEL ERASE/ADD menu appears.
5
Erase and/or add channels:
To erase an unwanted channel
(1) Make sure the cursor (z) is beside ERASE.
(2) Press CH +/– or the 0 – 9 buttons to select the
(2) Press CH +/– or the 0 – 9 buttons to select the
channel you want to erase, and press ENTER.
(3) Press
.
The “–” indication appears beside the channel
number, showing that the channel is erased
from the preset memory.
number, showing that the channel is erased
from the preset memory.
CHANNEL ERASE/ADD
ERASE
ADD
ADD
33
Use[0 – 9]or [CH+/–]
to select the channel.
to select the channel.
Use
Exit
MENU
MENU
CHANNEL ERASE/ADD
ERASE
ADD
ADD
33
Use[0 – 9]or [CH+/–]
to select the channel.
to select the channel.
Use
Exit
MENU
MENU
ENTER
1
2
3
4
5
6
7
8
0
9
CH
Selected channel number
or
To add a channel that you want
(1) Press V or v to move the cursor (z) to ADD.
(2) Press the 0 – 9 buttons to select the channel you
(2) Press the 0 – 9 buttons to select the channel you
want to add, and press ENTER.
(3) Press
.
The “+” indication appears beside the channel
number, showing that the channel is added to
the preset memory.
number, showing that the channel is added to
the preset memory.
CHANNEL ERASE/ADD
ERASE
ADD
ADD
33
Use
Exit
MENU
MENU
ENTER
1
2
3
4
5
6
7
8
0
9
Selected channel number
24
-EN
Getting Started
Setting cable TV on or off
If you have connected the projection TV to a cable TV
system, set CABLE to ON (the factory setting). If not,
set CABLE to OFF.
You do not have to do this procedure if you perform
AUTO SET UP (page
system, set CABLE to ON (the factory setting). If not,
set CABLE to OFF.
You do not have to do this procedure if you perform
AUTO SET UP (page
21
). Do this procedure only when
you want to set it manually.
1
Press MENU.
2
Press
V
or
v
to select
, and press
.
3
Set CABLE to ON or OFF:
(1) Press V or v to move the cursor (z) to CABLE,
and press
.
(2) Press V or v to select ON or OFF, and press
.
4
Press MENU to return to the original screen.
N o t e
• If CABLE appears in gray, the projection TV is set to a video
input and you cannot select CABLE. Press ANT so that a
channel number appears.
channel number appears.
4
Press
V
or
v
to move the cursor (
z
) to the
symbol showing the line you want to
adjust, and press
adjust, and press
.
+RED : Red vertical and horizontal line (left/right/up/
down adjustment)
+BLUE : Blue vertical and horizontal line (left/right/up/
down adjustment)
5
Press
V
,
B
,
v
, or
b
to move the line until it
converges with the center green line, and
press
press
.
6
Repeat steps 4 and 5 to adjust the other
lines until all three lines converge and are
seen as a white cross.
lines until all three lines converge and are
seen as a white cross.
7
Press MENU to return to the original screen.
SET UP
CHANNEL ERASE/ADD
CHANNEL CAPTION
CHANNEL BLOCK
FAVORITE CHANNEL
CABLE : OFF
AUTO PROGRAM
CC
CONVERGENCE
MENU
VIDEO LABEL
LANGUAGE : ENGLISH
Use
Exit
MENU
RED
BLUE
MENU
BLUE
MENU
CONVERGENCE
+
+
+
Us e
E x
MENU
i t
RETURN
Us e
E x
MENU
i t
RED
BLUE
MENU
BLUE
MENU
CONVERGENCE
+
+
+
RETURN
R
G
B
B
G+R
To move
Press
Up
V
Down
v
Right
b
Left
B
– 14 –
25
-EN
Getting Started
EN
Presetting channels
You can preset TV channels easily by using the AUTO
PROGRAM feature.
You do not have to do this procedure if you perform
AUTO SET UP (page
PROGRAM feature.
You do not have to do this procedure if you perform
AUTO SET UP (page
21
). Do this procedure only when
you want to set it manually.
1
Press MENU.
2
Press
V
or
v
to select
, and press
.
3
Press
V
or
v
to select AUTO PROGRAM, and
press
.
“AUTO PROGRAM” appears on the screen and the
projection TV starts scanning and presetting
channels automatically. When all the receivable
channels are stored, “AUTO PROGRAM”
disappears and the lowest numbered channel is
displayed.
projection TV starts scanning and presetting
channels automatically. When all the receivable
channels are stored, “AUTO PROGRAM”
disappears and the lowest numbered channel is
displayed.
4
Press MENU to return to the original screen.
To exit AUTO PROGRAM
Press any button.
Notes
• If the AUTO PROGRAM menu appears in gray, the projection
TV is set to a video input and you cannot select AUTO
PROGRAM. Press ANT so that a channel number appears.
PROGRAM. Press ANT so that a channel number appears.
• Presetting channels is also available for the AUX input.
If you prefer Spanish or French to English, you can
change the menu language.
You do not have to do this procedure if you select the
language during AUTO SET UP (page
change the menu language.
You do not have to do this procedure if you select the
language during AUTO SET UP (page
21
).
Do this procedure only when you want to set it
manually.
manually.
1
Press MENU.
2
Press
V
or
v
to select
, and press
.
3
Press
V
or
v
to select LANGUAGE, and press
.
4
Press
V
or
v
to select your favorite
language, “ENGLISH”, “ESPAÑOL”, or
“FRANÇAIS” and press
“FRANÇAIS” and press
.
5
Press MENU to return to the original screen.
N o t e
• Certain parts of the Spanish or French menus remain in
English.
CC
PREFERENCIAS
BORRAR/AÑADIR CANAL
NOMBRE DEL CANAL
BLOQUEAR CANAL
CANAL FAVORITO
CABLE : SI
AUTO PROGRAMACION
LENGUAJE : ESPAÑOL
MENU
ETIQUETA DE VIDEO
CONVERGENCIA
Use
Exit
MENU
CC
SET UP
CHANNEL ERASE/ADD
CHANNEL CAPTION
CHANNEL BLOCK
F AVORITE CHANNEL
CABLE : ON
AUTO PROGRAM
L ANGUAGE : ENGLISH
MENU
VIDEO LABEL
CONVERGENCE
Use
Exit
MENU
AUTO PROGRAM
Changing the
menu language
menu language
26
-EN
Operations
1
Press TV (POWER) to turn on the projection
TV.
TV.
The TIMER/STANDBY indicator flashes until the
picture appears.
picture appears.
If “VIDEO” appears on the screen, press ANT so
that a channel number appears.
that a channel number appears.
2
Press TV (FUNCTION).
Once you press TV (FUNCTION), the projection TV
function is set unless another function button is
pressed.
function is set unless another function button is
pressed.
3
Select the channel you want:
To select a channel directly
Press the 0 – 9 buttons, and press ENTER.
For example, to select channel 10, press 1, 0 and
ENTER.
For example, to select channel 10, press 1, 0 and
ENTER.
To scan through channels
Press CH +/– until the channel you want appears.
The channel can also be selected without pressing
ENTER.
ENTER.
4
Press VOL +/– to adjust the volume.
Switching quickly between two
channels
channels
You can use the JUMP button to switch or “jump” back
and forth between two channels.
and forth between two channels.
Press JUMP.
Pressing JUMP again switches the channel back to the
one you selected last.
one you selected last.
N o t e
• You cannot jump to channels you scanned through using the
CH +/– buttons.
Muting the sound
Press MUTING.
“MUTING” appears on the screen.
To restore the sound, press MUTING again, or press
VOL +.
VOL +.
VOLUME
MUTING
JUMP
VOL
CH
ENTER
1
2
3
4
5
6
7
8
0
9
FUNCTION
TV
POWER
TV
1
2
3
4
5
6
7
8
0
9
Watching the TV
Operations
TV (POWER)
MUTING
SLEEP
DISPLAY
TV/VIDEO
ANT
0 – 9 buttons
ENTER
JUMP
CH +/–
VOL +/–
TV (FUNCTION)
– 15 –
27
-EN
Operations
EN
Watching a video input picture
Press TV/VIDEO repeatedly until the desired
video input appears.
video input appears.
Each time you press TV/VIDEO, the display changes
as follows:
as follows:
TV n VIDEO 1 n VIDEO 2 n VIDEO 3 n VIDEO 4
To return to the TV picture, press ANT so that a
channel number appears.
channel number appears.
N o t e
• When the video label for VIDEO 4 is set to SKIP, the display
changes skipping the VIDEO 4 connection (see page
41
).
Changing the VHF/UHF input to the
AUX input
AUX input
Press ANT.
“AUX” appears beside the channel number.
Pressing ANT again switches back to the VHF/UHF
input.
input.
Displaying on-screen information
Press DISPLAY repeatedly until the desired
display appears.
display appears.
Each time you press DISPLAY, the display changes as
follows:
follows:
Status display* n XDS ON** n cc 1 ON***
DISPLAY OFF N
*
Channel number, the current time, channel caption
(if set), and MTS mode (if SAP is selected) are
displayed. SAP indication disappears after three
seconds.
(if set), and MTS mode (if SAP is selected) are
displayed. SAP indication disappears after three
seconds.
** Some programs are broadcast with XDS (Extended
Data Service) which shows a network name,
program name, program type, program length, call
letters, and time of the show. When you select XDS
with the DISPLAY button, this information will be
displayed on the screen if the broadcaster offers this
service.
program name, program type, program length, call
letters, and time of the show. When you select XDS
with the DISPLAY button, this information will be
displayed on the screen if the broadcaster offers this
service.
*** Some programs are broadcast with Caption Vision.
When you select Caption Vision with the DISPLAY
button, Caption Vision will be displayed on the
screen if the broadcaster offers this service. (See
page
button, Caption Vision will be displayed on the
screen if the broadcaster offers this service. (See
page
42
for selecting Caption Vision.)
To cancel the display, press DISPLAY repeatedly until
“DISPLAY OFF” appears. “DISPLAY OFF” goes off
after three seconds.
“DISPLAY OFF” appears. “DISPLAY OFF” goes off
after three seconds.
Setting the Sleep Timer
The projection TV stays on for the length of time you
specify and then shuts off automatically.
specify and then shuts off automatically.
Press SLEEP repeatedly until the time (minutes)
you want appears.
you want appears.
Each time you press SLEEP, the time changes as
follows:
30 n 60 n 90 n SLEEP OFF
follows:
30 n 60 n 90 n SLEEP OFF
TV/VIDEO
SLEEP
DISPLAY
N
To cancel the Sleep Timer, press SLEEP repeatedly
until “SLEEP OFF” appears, or turn off the projection
TV.
until “SLEEP OFF” appears, or turn off the projection
TV.
N
N
ANT
28
-EN
Operations
You can watch both the main/right picture and a
window/left picture simultaneously using the Picture-
in-Picture (PIP) or the Picture-and-Picture (Twin
View™) feature.
window/left picture simultaneously using the Picture-
in-Picture (PIP) or the Picture-and-Picture (Twin
View™) feature.
Use the yellow labelled buttons for PIP operations.
Displaying a window picture (PIP)
Press
.
Press
repeatedly to display a smaller
window picture.
Each time you press
, the size of the window picture
changes as follows: 1/4 size n 1/9 size n 1/16 size.
To remove the window picture, press PIP OFF.
1
2
3
Displaying a left picture (P&P)
Press
.
To restore the normal picture, press PIP OFF.
Notes
• If the main/right picture is not receiving an image, the
window/left picture may become a noisy picture.
•
The window/left picture sound is also output from the
AUDIO (VAR/FIX) OUT jacks when you listen to it.
AUDIO (VAR/FIX) OUT jacks when you listen to it.
Changing the window/left picture
input mode
input mode
Press TV/VIDEO (yellow labelled button) in PIP
or P&P mode to select the input mode.
or P&P mode to select the input mode.
Each time you press TV/VIDEO (yellow labelled
button), “TV”, “VIDEO 1”, “VIDEO 2”, “VIDEO 3”,
and “VIDEO 4” appear in sequence.
button), “TV”, “VIDEO 1”, “VIDEO 2”, “VIDEO 3”,
and “VIDEO 4” appear in sequence.
A window/left picture will appear in the same input
mode as the last time you used PIP.
mode as the last time you used PIP.
Notes
• If you connect your VCR without a cable box, your PIP input
source is a VCR. If you connect your VCR with a cable box,
your PIP input source is a VCR or cable box.
your PIP input source is a VCR or cable box.
• When the video label for VIDEO 4 is set to SKIP, “VIDEO
4”does not appear on the display.
TV/VIDEO
1
6
6
7
Watching two
programs at one
time — PIP/P&P
programs at one
time — PIP/P&P
(Twin View™)
/CH INDEX
SWAP
TV/VIDEO (yellow
labelled button)
labelled button)
PIP OFF
FREEZE
Left picture Right picture
Input-source mode or TV
channel for the left picture
channel for the left picture
Input-source mode
or TV channel for
the right picture
or TV channel for
the right picture
Input-source mode or TV
channel for the window picture
channel for the window picture
Input-source mode or TV
channel for the main picture
channel for the main picture
Main picture
Window picture
(1/4 size)
(1/4 size)
CH +/– (yellow
labelled button)
labelled button)
POSITION
AUDIO
6
7
CH INDEX
– 16 –
29
-EN
Operations
EN
Swapping the main/right and window/
left pictures
left pictures
Press SWAP in PIP or P&P mode.
Each time you press SWAP, the images and sound
from the main/right and window/left pictures switch
places with another.
from the main/right and window/left pictures switch
places with another.
N o t e
• The channels being received through the AUX connector
cannot be displayed as a window picture.
Watching multiple TV channels at one
time (CH INDEX)
time (CH INDEX)
You can display all the preset channels in sequence.
1
Press CH INDEX.
The main picture is displayed in the center with a
pink frame and 12 window pictures are displayed
around the main picture.
pink frame and 12 window pictures are displayed
around the main picture.
Each time you press CH INDEX, the 12 window
pictures will rotate and a new picture will appear.
pictures will rotate and a new picture will appear.
2
Press
V
,
B
,
v
or
b
to move the pink frame to
the channel you want to watch, and press
.
The selected channel appears on the screen.
To display eight favorite channels, press
.
To return to the normal picture, press PIP OFF.
Listening to the sound of the window/
left picture
left picture
Press AUDIO in PIP or P&P mode.
The display appears above the window/left picture
for a few seconds, indicating that the window/left
picture sound is being received.
for a few seconds, indicating that the window/left
picture sound is being received.
To restore the main picture sound, press AUDIO again.
The
The
display moves to the main picture channel
number.
Changing TV channels in the window/
left picture
left picture
Press CH +/– (yellow labelled button) in PIP or
P&P mode.
P&P mode.
Changing the position of the window
picture
picture
Press POSITION in PIP mode.
Each time you press POSITION, the window picture
will move counterclockwise on the screen.
will move counterclockwise on the screen.
SWAP
POSITION
CH
–
+
TV/VTR
AUDIO
CH INDEX
6
1
7
1
1
6
The sound of the window
picture is received.
picture is received.
6
R e c ip e
f l o u r - - - - 2
s u g a r - - - 1/2
s a l t - - - - - 1/2
b u t t e r - - - 1
30
-EN
Operations
The FREEZE feature is useful when you want to write
down an information such as a recipe from a cooking
program, a displayed address, or a phone number.
down an information such as a recipe from a cooking
program, a displayed address, or a phone number.
Press FREEZE.
The frozen picture differs depending on the current
display mode.
display mode.
To cancel the frozen picture, press FREEZE again.
VIDEO STANDARD
BRIGHTNESS
When watching TV programs, you can adjust the
picture to suit your taste.
You can adjust the picture of video input(s) as well.
picture to suit your taste.
You can adjust the picture of video input(s) as well.
1
Press MENU.
2
Press
V
or
v
to select
, and press
.
3
Select the item you want to adjust.
For example:
For example:
(1) To adjust the brightness, press V or v to move
the cursor (z) to BRIGHTNESS.
(2) Press
.
VIDEO
MODE : STANDARD
PICTURE
HUE
COLOR
BRIGHTNESS
SHARPNESS
CC
TRINITONE : HIGH
MENU
Use
Exit
MENU
VIDEO
MODE : STANDARD
PICTURE
HUE
COLOR
BRIGHTNESS
SHARPNESS
CC
TRINITONE : HIGH
MENU
Use
Exit
MENU
7
8
0
9
FREEZE
Freezing the picture
(FREEZE)
FREEZE
Adjusting the
picture
picture
(VIDEO)
V
v
MENU
RESET
R e c ip e
f l o u r - - - - 2
s u g a r - - - 1/2
s a l t - - - - - 1/2
b u t t e r - - - 1
6
VIDEO 1
R e c i i p e
f l o u r - - - - 2
s u g a r - - - 1/ 2
s a l t - - - - - 1/ 2
b u t t e r - - - 1
6
Normal mode
PIP mode
The current picture freezes.
The main picture freezes and
the window picture
disappears.
the window picture
disappears.
P&P mode
CH INDEX mode
Only the main picture
freezes.
freezes.
Both pictures freeze.
Click on the first or last page to see other KP-41T65K / KP-41T65T / KP-48V75K / KP-53S65T / KP-53V75K service manuals if exist.