Sony KLV-52X200A Service Manual ▷ View online
KLV-52X200A (CH) 2-1
2-1. TROUBLE SHOOTING
< Flow Chart >
SECTION 2
TROUBLE SHOOTING
Trouble
YES
NO
Set Power
See
1. No Power
YES
Self diagnosis
See
3. Self Diagnosis
NO
See
4. Audio Problem
See
5. Video problem
Audio
Video
YES
NO
Set re-boots
See
2. Reboot
1. No Power
1. No Power
When Set has no power (no LED action), these problem may be happ
When Set has no power (no LED action), these problem may be happ
ened ;
ened ;
-
-
Main Power Key does not work.
Main Power Key does not work.
-
-
TV Micro on AG has problem.
TV Micro on AG has problem.
-
-
Check H1 board (power key SW on it) and harness connection H1(CN
Check H1 board (power key SW on it) and harness connection H1(CN
3001) and
3001) and
AG(CN9201).
AG(CN9201).
-
-
Remote Commander does not work.
Remote Commander does not work.
-
-
Check RC battery,
Check RC battery,
-
-
Check H3 board (it has IR receiver) and harness connection H3(CN
Check H3 board (it has IR receiver) and harness connection H3(CN
3201) and
3201) and
AG(CN9201).
AG(CN9201).
-
-
TV Micro on AG has problem.
TV Micro on AG has problem.
In case of TV Micro on AG board does not work.
In case of TV Micro on AG board does not work.
-
-
Check STBY 5V power rail from G1. Refer
Check STBY 5V power rail from G1. Refer
“
“
Power Supply and Inverter
Power Supply and Inverter
”
”
document
document
more detail.
more detail.
-
-
TV Micro itself has problem. Replace AG board.
TV Micro itself has problem. Replace AG board.
KLV-52X200A (CH) 2-2
2. Set Reboots
2. Set Reboots
TV micro (on AG board) is monitoring WE Micro (on B board) and E
TV micro (on AG board) is monitoring WE Micro (on B board) and E
MMA (on FXE)
MMA (on FXE)
are alive or not like watch dog timer. When WEM or EMMA has not
are alive or not like watch dog timer. When WEM or EMMA has not
boot up,
boot up,
TVM try to re
TVM try to re
-
-
start. We can see chassis reboot at this case. Check B and FXE
start. We can see chassis reboot at this case. Check B and FXE
has correct power or not.
has correct power or not.
-
-
B board
B board
-
-
CN 4000 11V, 7V power and harness to G1
CN 4000 11V, 7V power and harness to G1
(52 : G2)
(52 : G2)
-
-
F4300, F4301, F4302, F4303, F4000 conduction.
F4300, F4301, F4302, F4303, F4000 conduction.
-
-
FXE board
FXE board
-
-
CN 7500
CN 7500
11V power.
11V power.
-
-
PS 7500 conduction.
PS 7500 conduction.
If power rail has no problem, replace B or FXE.
If power rail has no problem, replace B or FXE.
3. Self Diagnosis
3. Self Diagnosis
Communication Error (DTAU)
Communication Error (DTAU)
DIGCO
DIGCO
11
11
Power Error (DTAU)
Power Error (DTAU)
DIGBO
DIGBO
10
10
Audio Protector
Audio Protector
AUDIO
AUDIO
7
7
Panel Error
Panel Error
PANEL
PANEL
9
9
LowB Error
LowB Error
POWER_ER
POWER_ER
6
6
FAN Error
FAN Error
(Not Detected. Display Only)
(Not Detected. Display Only)
FAN
FAN
4
4
+B_OVP
+B_OVP
OVP
OVP
3
3
Panel Temp Error
Panel Temp Error
TEMP
TEMP
2
2
Contents
Contents
Display
Display
(Self Diagnosis mode )
(Self Diagnosis mode )
Red LED
Red LED
Blink
Blink
When self diagnosis happens, STBY (RED LED) blinks and
the history can be seen on display by self diagnosis mode.
KLV-52X200A (CH) 2-3
This indicates high temperature inside chassis. IC9201 on AG Board Side is
monitoring temperature and DE micro on B board is controlling IC9201.
monitoring temperature and DE micro on B board is controlling IC9201.
When it happens;
- Check chassis environment
- Check around IC9201 and replace AG or B if temperature monitoring circuit
has problem.
has problem.
- Check panel
3
3
-
-
1. Temp Error (RED 2 times blink)
1. Temp Error (RED 2 times blink)
This indicates OVP (Over Voltage Protection) of G board. TV Micro (IC9704,
AG board) pin139 detects OVP and shuts down chassis power (STBY). See
Power Supply and Inverterî document more detail.
AG board) pin139 detects OVP and shuts down chassis power (STBY). See
Power Supply and Inverterî document more detail.
3
3
-
-
2. OVP (RED 3 times blink)
2. OVP (RED 3 times blink)
KLV-52X200A (CH) 2-4
This indicates POWER Error, Low B error of 11V from G board. TV Micro
(IC9704, AG board) pin150 detects POWER_ER and shuts down chassis
power (STBY).
(IC9704, AG board) pin150 detects POWER_ER and shuts down chassis
power (STBY).
- Check CN4000 on B board 11V and F4000 has 11V or not. 11V to AG board
comes this path.
comes this path.
- Check G board. See Power Supply and Inverterî document more detail.
3
3
-
-
3. POWER_ER (RED 6 times blink)
3. POWER_ER (RED 6 times blink)
This indicates Audio Error (Protection). It happens;
- IC8806 on AG board, Audio Amp detects over current, thermal shut down
and/or low voltage of itself.
and/or low voltage of itself.
- DC voltage detected for speaker line.
Check above and replace AG board.
3
3
-
-
4. Audio Error (RED 7 times blink)
4. Audio Error (RED 7 times blink)
Click on the first or last page to see other KLV-52X200A service manuals if exist.