Sony KLV-32V300A / KLV-40V300A / KLV-46V300A Service Manual ▷ View online
– 20 –
KLV-32/40/46V300A
RM-GA008
SECTION 2
WIRE DRESSING
CAUTION:
1. Do not overpull the wire during dressing
_> avoid disconnection of wires.
2. Make sure wires are kept away from
sharp edges, heatsinks & other
hight-temperature parts.
1. Do not overpull the wire during dressing
_> avoid disconnection of wires.
2. Make sure wires are kept away from
sharp edges, heatsinks & other
hight-temperature parts.
Legend:
Hook
2-1-1. Wire Dressing overview
2-1. (KLV-32V300A)
2-1-2. i) Dress Conn Assy 14P with G1 bracket's slit
ii) Dress Conn Assy 14P&13P with G1 bracket's hook (3X) & pin lead (2X)
iii) Make sure Conn Assy 14P & 13P are keep away from heat sink
Connector Assy 14P
Pin lead
Connector Assy 13P
Connector Assy 13P
Pin lead
Heat Sink
Connector Assy 14P
– 21 –
KLV-32/40/46V300A
RM-GA008
Connector Assy 13P & 14P
LVDS cable
Sheet (Core)C
Put LVDS cable straight
Clamp Edge(M)
Connector Assy 20P
Connector Assy 14P
Sheet (Core)C
Connector Assy 13P & 14P
Make sure do not
over pull wire when
apply sheet
over pull wire when
apply sheet
Connector Assy 20P
Tape(LCD)
Connector assy 20P
Tape(LCD)
Sheet(Core)C
Make sure Connector assy 20P
is not tight when apply Tape LCD.
is not tight when apply Tape LCD.
Connector Assy 13P
2-1-5. i) Dress Connector Assy 11P & 12P at G3
bracket's hook.
ii) Dress Connector Assy 11P & 12P with
Sheet(Core)C.
2-1-7. i) Apply Sheet(Core)C on LCD panel
ii) Dress Connector Assy 20P with
Tape(LCD)
2-1-6. Dress Connector Assy 20P with Tape(LCD)
2-1-4. Dress Connector Assy 13P, 14P & 20P with
Clamp Edge(M)
2-1-3. Dress LVDS cable with Sheet(Core)C and put under Connector assy 13P & 14P.
– 22 –
KLV-32/40/46V300A
RM-GA008
2-1-10. Dress SP Connector assy 4P with slide
clamp (2X)
2-1-9. Dress SP Connector Assy 4P with
FG Clamp to Top DTT shield
2-1-8. Dress Connector Assy 20P(H1 wire) with Tape(LCD) & Slide Clamp.
2-1-11. i) Dress Connector Assy 20P (H4 wire) & SP Connector Assy 4P with G1 bracket's hook (4X)
ii) Apply Sheet(Core)C on LCD panel
iii) Dress Connector Assy 20P (H4 wire) with Tape(LCD)
Connector assy 20P
(H1 wire)
(H1 wire)
Tape(LCD)
SP Connector
Assy 4P
Assy 4P
End of UL tape as
reference line
reference line
Screw 3X8
Screw boss
Caution : Pull away from
screw boss
screw boss
Sheet(Core) C
Connector Assy 20P
(H4 wire)
(H4 wire)
Make sure Connector assy 20P(H4 wire)
is not tight when apply Tape LCD.
is not tight when apply Tape LCD.
Tape(LCD)
SP Connector Assy 4P
Screw boss
Caution : Pull away from screw boss
FG Clamp
Make sure wire is
not trapped
when install Top
DTT to bottom DTT
shield
not trapped
when install Top
DTT to bottom DTT
shield
– 23 –
KLV-32/40/46V300A
RM-GA008
2-1-13. i) Dress AC inlet wire with G1 bracket's hook
ii) Make sure AC inlet wire is keep away from
from heat sink
2-1-12. Dress Connector assy 20P and SP Connector
Assy 4P underneath AC filter inlet
2-1-15. Screw Connector Assy 1P to the direction
2-1-14. i) Dress Connector Assy 20P with
Side Jack bracket's hook
ii) Screw Connector Assy 1P to the direction
2-2-1. Wire dressing overview.
2-2. (KLV-40V300A)
SP Connector Assy 4P
Connector Assy 20P
(H4 wire)
(H4 wire)
AC inlet wire
Heat Sink
Connector Assy 20P
Connector Assy 1P
Connector Assy 1P
Click on the first or last page to see other KLV-32V300A / KLV-40V300A / KLV-46V300A service manuals if exist.