DOWNLOAD Sony KLV-32S510A / KLV-40S510A / KLV-46S510A / KLV-52S510A Service Manual ↓ Size: 19.93 MB | Pages: 97 in PDF or view online for FREE

120V AC, 60Hz

120W (KLV-32S510A Only)
200W (KLV-40S510A Only)
245W (KLV-46S510A Only)
295W (KLV-52S510A Only)

Less than 1 W 

VIDEO (IN) 1/2:
 

Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative 

 

 

C: 0.286 Vp-p (Burst signal), 75 ohms

 Video
 

 

1 Vp-p, 75 ohms unbalanced, sync negative 

 Audio
   500 

mVrms 

(Typical)

   Impedance:47 

kilohms

COMPONENT IN 1/2:
 YP

 

 

Y:1.0 Vp-p, 75 ohms unbalanced, sync negative

 

 

P

B

:0.7 Vp-p, 75 ohms

 

 

P

R

:0.7 Vp-p, 75 ohms

 

 

Signal format: 480i, 480p, 720p, 1080i, 1080p

 AUDIO
   500 

mVrms 

(Typical) 

   Impedance: 

47 

kilohms

HDMI IN 1/2/3:
HDMI: 

Video: 480i, 480p, 720p, 1080i,1080p, 1080/24p

 

 

Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits

AUDIO
   500 

mVrms 

(Typical)

   Impedance: 

47 

kilohms

AUDIO OUT:
 

500 mVrms (Typical)

DIGITAL AUDIO OUT (OPTICAL):
 PCM 

optical 

signal

PC IN:
 

D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive

PC AUDIO INPUT:
 

Stereo mini jack, 500 mVrms (Typical)

 Impedance: 

47 

kilohms

Macintosh is a trademark of Apple Inc., registered in the 
U.S. and other countries.

HDMI, the HDMI logo and High-Definition Multimedia 
Interface are trademarks or registered trademarks of HDMI 
Licensing, LLC.

Fergason Patent Properties, LLC:  
U.S. Patent No. 5,717,422
U.S. Patent No. 6,816,141

Manufactured under license from Dolby Laboratories. 
Dolby and the double-D symbol are trademarks of Dolby 
Laboratories.

TruSurround XT, SRS and (

z) symbol are trademarks of 

SRS Labs, Inc. TruSurround XT technology is incorporated 
under license from SRS Labs, Inc.

Blu-ray Disc is a trademark.

“BRAVIA”, 

, BRAVIA Sync and 

 are 

trademarks or registered trademarks of Sony Corporation.

“PLAYSTATION” is a registered trademark and “PS3” is 
a trademark of Sony Computer Entertainment Inc.

Your BRAVIA TV is ENERGY STAR

®

 

qualified in the “Home” mode.
It meets strict energy efficiency guidelines 
set by the U.S. Environmental Protection 
Agency and Department of Energy. 
ENERGY STAR is a joint program of these government 
agencies, designed to promote energy efficient products 
and practices.

s

When the TV is initially set up, it is designed to meet 
ENERGY STAR requirements.

s

Changes to certain features, settings, and 
functionalities of this TV (i.e. Picture/Sound, Light 
Sensor, Power Savings) can slightly change the 
power consumption.

Depending upon such changed settings, the power 
consumption may increase which possibly could exceed the 
limits required for the ENERGY STAR qualification.

798 x 583 x 227 mm

987 x 683 x 271 mm

1,123 x 770 x 323 mm

1,262 x 869 x 362 mm

31

1/2

 x 23 x 9 in

38

7/8

 x 27 x 10

3/4

 in

44

1/4

 x 30

3/8

 x 12

3/4

 in

49

3/4

 x 34

1/4

 x 14

3/8

 in

798 x 536 x 89 mm

987 x 636 x 93 mm

1,123 x 723 x 96 mm

1,262 x 822 x 115 mm

31

1/2

x 21

1/8

 x 3

5/8

 in

38

7/8

 x 25

1/8

 x 3

3/4

 in

44

1/4

 x 29

1/2

 x 3

7/8

 in

49

3/4

 x 32

3/8

 x 4

5/8

 in

200 x 200

13.1 kg

18.5 kg

25.5 kg

34.5 kg

28.9 lbs

40.8 lbs

56.2 lbs

76.0 lbs

11.9 kg

16.8 kg

22.6 kg

29.9 kg

26.3 lbs

37.1 lbs

49.8 lbs

65.9 lbs

All measurements are approximations.

1

7/16

 x 7

300 x 300

M6 x 8-12 mm

10 W+ 10 W

35 X 175

NTSC  

American 

TV 

Standard

ATSC (8VSB terrestrial)  ATSC compliant 8VSB
QAM on cable 

ANSI/SCTE 07 2000

Analog
 2-69 

Terrestrial

 1-135 

Cable

Digital
 2-69 

Terrestrial

 1-135 

Cable

75-ohm external terminal for RF inputs

LCD (Liquid Crystal Display) Panel

1,920 dots x 1,080 lines

~ 31.5” (KLV-32S510A Only)
~ 40” (KLV-40S510A Only)
~ 46” (KLV-46S510A Only)
~ 52” (KLV-52S510A Only)

Remote Commander RM-YD028
Two Size AA (R6) Batteries
Cable Holder (1 attached to the TV)
Operating Instructions
Quick Setup Guide
Warranty Card
Safety and Regulatory Booklet
Attaching the Table-Top Stand Flyer
Screws (4) (KLV-32S510A/40S510A/46S510A Only)

Connecting Cables
Wall-Mount Bracket
 SU-WL500

These servicing instructions are for use by qualifi ed service personnel only. To reduce the risk of electric shock, do not perform any servicing other 
than that contained in the operating instructions unless you are qualifi ed to do so.

Be sure to consider the following while setting up your TV:

• Carry the TV with an adequate number of people; larger size TVs require two or more people.

• Correct hand placement while carrying the TV is very important for safety and to avoid 

damages.

• Ensure your TV has adequate ventilation if it is installed against a wall or in an enclosed area.

• For best picture quality, do not expose the screen to direct illumination or sunlight.

• Avoid installing the TV in a room with reflective wall and floor materials.

• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may 

cause moisture condensation. This may cause the TV to show poor picture and/or poor color. 
Should this occur, allow moisture to evaporate completely before powering the TV on.

An isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis. The chassis of this receiver is 
directly connected to the ac power line.

!

 SAFETY-RELATED COMPONENT WARNING!!

Components identifi ed by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace 
these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that 
are critical for safe operation are identifi ed in this manual. Follow these procedures whenever critical components are replaced or improper operation is 
suspected. 

There are critical components used in LCD color TVs that are important for safety. These components are identifi ed with shading and 

mark on the schematic diagrams and the electrical parts list. It is essential that these critical parts be replaced only with the part number 
specifi ed in the electrical parts list to prevent electric shock, fi re, or other hazard. 

NOTE: Do not modify the original design without obtaining written permission from the manufacturer or you will void the original parts and 
            labor guarantee. 

When installing the LCD panel on a wall, the LCD panel must be secured using the 4 mounting holes on the rear cover. 

 do not press on the panel or frame edge to avoid the risk of electric shock.

  do not scratch or press on the panel with any sharp objects.

  do not leave the module in high temperatures or in areas of high humidity for an extended period of time.

  do not expose the LCD panel to direct sunlight.

  avoid contact with water. It may cause a short circuit within the module. 

  disconnect the AC adapter when replacing the backlight (CCFL) or inverter circuit. 

(High voltage occurs at the inverter circuit at 650Vrms.) 

  always clean the LCD panel with a soft cloth material.

  use care when handling the wires or connectors of the inverter circuit. Damaging the wires may cause a short. 

  protect the panel from ESD to avoid damaging the electronic circuit (C-MOS).