Sony KLV-26V300A / KLV-32V300A / KLV-40V300A / KLV-46V300A (serv.man2) Service Manual ▷ View online
– 20 –
KLV-26/32/40/46V300A
RM-GA008
SECTION 2
WIRE DRESSING
CAUTION:
1. Do not overpull the wire during dressing
_> avoid disconnection of wires.
2. Make sure wires are kept away from
sharp edges, heatsinks & other
hight-temperature parts.
1. Do not overpull the wire during dressing
_> avoid disconnection of wires.
2. Make sure wires are kept away from
sharp edges, heatsinks & other
hight-temperature parts.
Legend:
Hook
2-1-1. Wire dressing overview
2-1-2. Dress Conn Assy 14P with Slide Clamp (2X)
2-1-4. Dress Conn Assy 14P & 13P with G1 bracket's
2-1. (KLV-26V300A)
2-1-3. i) Dress Conn Assy 14P with G1 bracket's hook
ii) Dress Conn Assy 14P & 13P with pin lead (2X)
iii) Make sure Conn Assy are keep away from heatsink
2-1-5. Dress Conn Assy 20P with Tape(LCD)
Connector Assy 14P
Pin lead
Connector Assy 13P
Connector Assy 13P
Connector Assy 14P
Connector Assy 20P
Tape(LCD)
Connector Assy 14P
Heat Sink
– 21 –
KLV-26/32/40/46V300A
RM-GA008
2-1-7. Dress Conn Assy 20P (H1 wire) with
Slide Clamp
2-1-6. Dress Conn Assy 13P, 14P & 20P with
Clamp Edge (M)
2-1-9. Dress SP Conn Assy 4P with FG Clamp to
Top DTT shield
2-1-8. i) Apply sheet (Core) C on LCD panel
ii) Dress Conn Assy 20P with Tape (LCD)
Clamp Edge(M)
Connector Assy 20P
Connector Assy 14P
Connector Assy 13P
Connector assy 20P
(H1 wire)
(H1 wire)
Tape(LCD)
Make sure Connector assy 20P
is not tight when apply Tape LCD.
is not tight when apply Tape LCD.
Sheet(Core)C
Connector assy 20P
(H3 wire)
(H3 wire)
SP Connector
Assy 4P
Assy 4P
Make sure wire
is not trapped
when install Top
DTT to bottom
DTT shield
is not trapped
when install Top
DTT to bottom
DTT shield
FG Clamp
Screw 3X8
End of UL tape as
reference line
reference line
Screw boss
Caution : Pull away from
screw boss
screw boss
Connector Assy 20P
(H4 wire)
(H4 wire)
Screw boss
Caution : Pull away from
screw boss
screw boss
2-1-11. i) Dress SP Conn Assy 4P with
G1 bracket's hook (2X)
ii) Dress Conn Assy 20P with
G1 bracket's hook (4X)
2-1-10. Dress SP Conn Assy 4P with
Slide Clamp (2X)
– 22 –
KLV-26/32/40/46V300A
RM-GA008
2-1-13. i) Dress AC inlet wire with G1 bracket's hook
ii) Make sure AC inlet wire is keep away from
heatsink
2-1-12. Dress Conn Assy 20P and Conn Assy 4P
underneath AC filter inlet
2-2-1. Wire Dressing overview
2-1-14. i) Dress Conn Assy 20P with Side Jade
bracket's hook (2X)
ii) Screw Conn Assy 1P to the direction
2-2-2. i) Dress Conn Assy 14P with G1 bracket's slit
ii) Dress Conn Assy 14P&13P with G1 bracket's hook (3X) & pin lead (2X)
iii) Make sure Conn Assy 14P & 13P are keep away from heat sink
2-2. (KLV-32V300A)
SP Connector Assy 4P
Connector Assy 20P
(H4 wire)
(H4 wire)
AC inlet wire
Heat Sink
Connector Assy 20P
Connector Assy 1P
Connector Assy 14P
Pin lead
Connector Assy 13P
Connector Assy 13P
Pin lead
Heat Sink
Connector Assy 14P
– 23 –
KLV-26/32/40/46V300A
RM-GA008
Connector Assy 13P & 14P
LVDS cable
Sheet (Core)C
Put LVDS cable straight
Clamp Edge(M)
Connector Assy 20P
Connector Assy 14P
Sheet (Core)C
Connector Assy 13P & 14P
Make sure do not
over pull wire when
apply sheet
over pull wire when
apply sheet
Connector Assy 20P
Tape(LCD)
Connector assy 20P
Tape(LCD)
Sheet(Core)C
Make sure Connector assy 20P
is not tight when apply Tape LCD.
is not tight when apply Tape LCD.
Connector Assy 13P
2-2-5. i) Dress Connector Assy 11P & 12P at G3
bracket's hook.
ii) Dress Connector Assy 11P & 12P with
Sheet(Core)C.
2-2-7. i) Apply Sheet(Core)C on LCD panel
ii) Dress Connector Assy 20P with
Tape(LCD)
2-2-6. Dress Connector Assy 20P with Tape(LCD)
2-2-4. Dress Connector Assy 13P, 14P & 20P with
Clamp Edge(M)
2-2-3. Dress LVDS cable with Sheet(Core)C and put under Connector assy 13P & 14P.
Click on the first or last page to see other KLV-26V300A / KLV-32V300A / KLV-40V300A / KLV-46V300A (serv.man2) service manuals if exist.