DOWNLOAD Sony KLV-26S550A / KLV-32S530A / KLV-32S550A / KLV-37S550A Service Manual ↓ Size: 5.51 MB | Pages: 72 in PDF or view online for FREE

– 12 –

CAUTION :
1.  Do not overpull the wires during dressing

--> avoid disconnection of wires.

2.  Make sure wires are kept away from

sharp edges, heatsinks & other
high-temperature parts.

 

 

 

 

Non CISPR model

1) Insert Connector Assy 10P to HT1 PWB. Attach HT1
 

PWB to Light Guide on Bezel.

2)  Insert SP Conn Assy 4P to speaker as shown.
 

Attach Sheet Core, C (X1) as shown.

Left

speaker

3) Insert Connector Assy 10P to SW unit. Attach SW
 

unit to Bezel and dress with Tape (LCD) (X2).

CISPR model

Attach Sheet Core, 

C to SP Conn Assy 

4P; Lead Assy,

Earth and conn Assy

10P (X1). Use daturm 

line to position
Sheet core, C.

Left

speaker

Conn Assy 10P

(HT1 PWB)

behind speaker

2

1

1

Dress Conn Assy

10P

(SW unit) using

Tape (LCD) (X2).

– 13 –

A

1) Attach Sheet Core, C (X2) to frame bottom as shown.
2) Insert Conn Assy 14P to inverter and GT3 PWB as shown. Attach Sheet Core, C as shown.

Note: When inserting LVDS harness to panel, make sure it is
 

fully inserted and in the correct direction as shown.

3) Attach Sheet Core, C (X2) to LVDS harness.
4) Attach Sheet Core, C to Connector Assy 14P 
  and LVDS harness.

3) Attach Tape, Shield followed by Sheet Core, C on to LVDS harness.
4) Insert screw on to earth clamp on LVDS harness.
5) Attach Sheet Core, C to Connector Assy 14P and LVDS harness.
6) Attach Sheet Core, C on to LVDS harness

 

 

Attach Sheet Core, C to 

LVDS harness.

Non-

CISPR

model

CISPR

model

NG

OK

Dress SP Conn Assy

4P to the left of this

line (edge of BT2 PWB)

Dress SP Conn Assy 4P; Lead

Assy, Earth and Conn Assy 10P

Wires along this path (behind Under cover)

and below raised area of frame bottom

Attach Sheet Core, C

towards the left side of

frame bottom.

Frame

bottom

Dress SP Conn Assy 4P and Conn

Assy 10P using Sheet Core, C. Use

datum line to position Sheet Core, C.

Attach Tape, Shield followed

by Sheet Core, C to LVDS

harness.

Attach Sheet Core, C to

Conn Assy 14P and LVDS

Insert screw on to

earth clamp on

LVDS harness.

Attach Sheet Core, C (X2) to

LVDS harness.

Attach Sheet Core, C to

conn Assy 14P and LVDS

harness

Attach Sheet Core, C to

Conn Assy 14P and SP

Conn Assy 4P.

Attach Sheet

Core, C to

main bracket

(X3).

Dress Conn Assy

10P;

Lead Assy, Earth

and

SP Conn Assy 4P

together.

Insert Conn Assy 14P to

GT3 PWB.

Attach Sheet Core, C (X1).

1

1

2

2

4

3

3

6

5

4

1

– 14 –

110 ± 5mm

AC Cord Holder

 

 

 

 

 

70± 

150 ± 5mm 

AC Cord 

Ferrite Core

 

 

1) Install AC cord holder to AC power cord at specified position 
 

as shown.

2) Then install the AC power cord with holder on to under cover.
3) Lastly, dress AC power cord using pin, wire A6101 as shown.
4) Keep the AC power cord away from surrounding parts.

Non CISPR model

1) Install Ferrite core to AC power cord at specified position as shown.
2) Install AC cord holder to AC power cord at specified position as shown.
3) Attach Sheet Core, E to Ferrite Core and frame bottom.
4) Then install the AC power cord with holder on to under cover.
5) Lastly, dress AC power cord using pin, wire A6101 as shown.
6) Keep the AC power cord away from surrounding parts.

CISPR model

Make sure distance of

>4mm is kept from

F6102, C6102 and C6111

leads to single insulated

portion of AC power cord

(Blue and Brown wire).

This can be controlled by

using pin, wire A6101 to

dress AC power cord

away from conductive parts.

Make sure distance of >4mm is kept

from F6102, C6102 and C6111

leads to single insulated portion of

AC power cord (Blue and Brown

wire). This can be controlled by

using pin, wire A6101 to dress AC

power cord away from conductive parts.

Caution:
1. Ensure that AC power cord is not stressed whilst
  inserting it into AC cord bracket.

Insert the AC cord holder on to

under cover

Dress AC 

power cord

using pin, 

wire A6101.

AC power

cord's wire is

facing to the

right

Attach Sheet

Core, E to Ferrite

Core.

Dress AC

power cord

using pin, wire

A6101.

Insert the AC cord
holder on to under

cover

4

2

3

3

5

6

4

1

2

– 15 –

Non-CISPR model

Left Speaker

1)  Insert Connector Assy 10P to HT1 PWB. Attach HT1 PWB 
 

to Light Guide on Bezel.

2)  Insert SP Conn Assy 4P to speaker as shown.
 

Attach Sheet Core, C (X1) as shown.

1)  Insert Connector Assy 10P to SW unit. Attach SW unit to Bezel
 

and dress with Tape (LCD) (X2).

2)  Insert SP Conn Assy to speaker and attach Sheet Core, C as shown.
3)  Attach Sheet Core, C to Frame Bottom as shown.

Right Speaker

CISPR model

 

p

 

Left speaker

Right speaker

Attach Sheet Core, C to SP Conn Assy 4P

and Conn Assy 10P (X1). Use datum line 

to position Sheet Core, C. Do not cover 

speaker hole with Sheet Core, C.

1

2

1

2

3

Conn Assy 10P (HT1

PWB) behind speaker

Conn Assy 10P (HT1

PWB) behind speaker

Do not cover speaker

hole

Dress Conn Assy 10P

(SW unit) using Tape

(LCD) (X2).

Do not cover speaker hole

Attach Sheet Core, C to SP Conn Assy

4P

and Conn Assy 10P to Frame Bottom

Dress SP Conn Assy 4P and Conn Assy

10P using Sheet Core, C. Use datum line

to position Sheet Core , C.