Sony KLV-17HR3 Service Manual ▷ View online
–
9
–
–
WA1
RM-Y1108
The Picture Adjustment Menu
The “Picture Adjustment” menu allows you to
alter the picture settings.
To do this:
Press the MENU button and then press OK to
Press the MENU button and then press OK to
enter this menu. Next, press
v
or
V
to select the
desired option and press OK. Finally, read below
how to operate into each option.
how to operate into each option.
Picture Mode This option allows you to customise the picture mode based on the programme
you are watching. After selecting this option press OK. Next, press repeatedly
v
or
V
to select:
Live
(for live broadcast programmes, DVD and Digital Set Top Box
receivers).
receivers).
Personal (for individual settings).
Movie (for
films).
Once you have selected your desired option, press OK to store.
"Brightness", "Colour", "Sharpness" and "Backlight" level of "Live" and "Movie" mode are
fixed on the factory to get the best picture quality.
Contrast
Press
B
or
b
to reduce or enhance picture contrast. Next, press OK to store.
Brightness
Press
B
or
b
to darken or brighten the picture. Next, press OK to store.
This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”.
Colour
Press
B
or
b
to decrease or to increase color intensity. Next press OK to store.
This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”.
Hue
Press
B
or
b
to decrease or to increase the green tones. Next press OK to store.
This option only appears for NTSC signal (e.g. USA video tapes).
Sharpness
Press
B
or
b
to soften or to sharpen the picture. Next press OK to store.
This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”.
Backlight
Press
B
or
b
to darken or brighten the backlight.
This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”.
,
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Select:
Set:
OK
End:
MENU
Personal
80
50
50
50
70
80
50
50
50
70
Auto
Normal
Normal
Picture Adjustment
Personal
80
50
50
50
70
80
50
50
50
70
Auto
Normal
Normal
Picture Mode
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Select:
Set:
OK
End:
MENU
Back:
continued...
Reset
Press OK to reset the picture to the factory preset levels.
Noise
This option is set to Auto to automatically reduce the snowy picture visible in the weak broadcast
Reduction
signal. However, it can be modified. After selecting this option press
b
. Next, press
v
or
V
to
select
Off. Finally, press OK to store.
Colour Tone
This option allows you to alter the tint of the picture. After selecting this option press
b
. Next, press
repeatedly
v
or
V
to select: Warm (gives the white colours a red tint), Normal (gives the white
colours a neutral tint), Cool (gives the white colours a blue tint). Finally press OK to store.
–
10
–
WA1
RM-Y1108
The Sound Adjustment Menu
The “Sound Adjustment” menu allows you to
alter the sound settings.
alter the sound settings.
To do this:
Press the MENU button and press
Press the MENU button and press
v
to select
, then press OK to enter this menu. Next,
press
v
or
V
to select the desired option and
press OK. Finally, read below how to operate
into each option.
into each option.
Sound
This option allows you to customise the sound effect. After selecting this
Effect
option press OK. Next, press repeatedly
v
or
V
to select:
Natural Enhances clarity, detail and presence of sound by using “BBE High
Definition Sound system”*.
Dynamic “BBE High Definition Sound system”* intensifies clarity and presence of
sound for better intelligibility and musical realism.
Off
Flat response.
Once you have selected your desired option, press OK to store.
This function has no effect on headphones sound.
Treble
Press
B
or
b
to decrease or to increase higher-frequency sounds. Next, press OK to
store.
Bass
Press
B
or
b
to decrease or to increase the lower-frequency sounds. Next, press OK
to store.
Balance
Press
B
or
b
to emphasise the left or the right speaker. Next, press OK to store.
Reset
Press OK to reset the sound to the factory preset levels.
Dual
Press
b
. Next:
Sound
For a Stereo broadcast:
Press
v
or
V
to select Stereo or Mono. Next press OK to store.
For a bilingual broadcast:
Press
v
or
V
to select Mono (for mono channel if available), A (for channel 1) or B
(for channel 2). Next press OK to store.
Auto
Press
b
. Next press
v
or
V
to select On (the volume level of the channels will
Volume
stay the same, independent of the broadcast signal, e.g. in the case of advertisements)
or Off (the volume level changes according to the broadcast signal). Next press OK to
store.
or Off (the volume level changes according to the broadcast signal). Next press OK to
store.
This function has no effect on headphones sound.
* The “BBE High Definition Sound system” is manufactured by Sony Corporation under license
from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word
“BBE” and BBE Symbol are trademarks of BBE Sound, Inc.
“BBE” and BBE Symbol are trademarks of BBE Sound, Inc.
,
m
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Select:
Set:
OK
End:
MENU
Personal
80
50
50
50
70
80
50
50
50
70
Auto
Normal
Normal
Sound Effect
Treble
Bass
Balance
Reset
Dual Sound
Auto Volume
Treble
Bass
Balance
Reset
Dual Sound
Auto Volume
Natural
0
0
0
0
0
0
Stereo
Off
Off
Sound Adjustment
Select:
Set:
OK
End:
MENU
Sound Adjustment
Sound Effect
Treble
Bass
Balance
Reset
Dual Sound
Auto Volume
Treble
Bass
Balance
Reset
Dual Sound
Auto Volume
Natural
0
0
0
0
0
0
Stereo
Off
Off
Select:
Set:
OK
End:
MENU
Back:
The Features Menu
The “Features” menu allows you to alter
various settings of the TV.
various settings of the TV.
To do this:
Press the MENU button and press
v
twice to
select
, then press OK to enter this menu.
Next, press
v
or
V
to select the desired option
and press OK. Finally, read below how to
operate into each option.
operate into each option.
POWER SAVING
This option allows you to reduce the power consumption of this TV.
To do this:
After selecting the option, press OK. Then, press
After selecting the option, press OK. Then, press
v
or
V
to select Reduce. Next, press OK to store.
AUTO FORMAT
This option allows you to automatically change the aspect ratio of the screen.
To do this:
After selecting the option, press OK. Then, press
After selecting the option, press OK. Then, press
v
or
V
to select On (if you wish the TV set to
automatically switch the screen format according to the broadcast signal) or Off (if you wish to
keep your preference). Finally, press OK to store.
keep your preference). Finally, press OK to store.
Even if you have selected “On” or “Off”, you can always modify the format of the screen by
pressing
repeatedly on the remote control to select one of the following formats:
SMART: Imitation of wide screen effect for 4:3 broadcast.
4:3:
Conventional 4:3 picture size, full picture
information.
14:9:
Compromise between 4:3 and 16:9 picture size.
ZOOM: Widescreen format for letterbox movies.
WIDE:
For 16:9 broadcast. Full picture information.
In “SMART”, “ZOOM” and “14/9” modes, parts of the top and bottom of the screen are
cut off. Press
v
or
V
to adjust the position of the image on the screen (e.g. to read
subtitles).
According to the format of diffussion, bl ack bands can always appear whatever the
selected mode.
,
m
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Select:
Set:
OK
End:
MENU
Personal
80
50
50
50
70
80
50
50
50
70
Auto
Normal
Normal
Power Saving
Auto Format
TV Speakers
RGB Center
Auto Format
TV Speakers
RGB Center
Standard
Off
On
0
Off
On
0
Features
Select:
Set:
OK
End:
MENU
Features
Power Saving
Auto Format
TV Speakers
RGB Center
Auto Format
TV Speakers
RGB Center
Standard
Off
On
0
Off
On
0
Select:
Set:
OK
End:
MENU
Back:
4:3
ZOOM
14:9
WIDE
SMART
–
11
–
WA1
RM-Y1108
TV SPEAKERS
This option allows you to turn off the TV speakers e.g. to listen to the sound through external audio equipment con-
nected to the TV.
nected to the TV.
To do this:
Press the
Press the
v
or
V
buttons to select one of the following options, then press the OK button.
On
The sound is output from the TV speakers.
One Time Off
The TV speakers are temporarily turned off allowing you to listen to the sound from external
audio equipment.
audio equipment.
The "TV Speakers" option automatically returns to "On" when the TV set is switched off.
Permanent Off
The TV speakers are permanently turned off allowing you to listen to the sound from external
audio equipment.
audio equipment.
To turn on the TV speakers again, change the "TV Speakers" option to "On".
RGB CENTER
This option is only available if an RGB source has been connected to the Scart connector
1/
1 on the
rear of TV.
When viewing an RGB signal, the picture may need some adjusting. This option allows you to adjust the horizontal
picture position so that the picture is in the middle of the screen.
picture position so that the picture is in the middle of the screen.
To do this:
Once you have entered the "Features" menu as it is explained in on page 28 and while watching an RGB source select
the “RGB Center” option and press OK. Then press
Once you have entered the "Features" menu as it is explained in on page 28 and while watching an RGB source select
the “RGB Center” option and press OK. Then press
B
or
b
to adjust the centre of the picture between –5 and +5.
Finally press OK to confirm and store.
The Set Up Menu
The “Set Up” menu allows you to alter various
options on this TV.
To do this:
Press the MENU button and press
Press the MENU button and press
v
three times
to select
, then press OK to enter this menu.
Next, press
v
or
V
to select the desired option
and press OK. Finally, read below how to
operate into each option.
operate into each option.
LANGUAGE
This option allows you to select the language that menus are displayed in.
This option allows you to select the language that menus are displayed in.
To do this:
After selecting the option, press OK and then proceed in the same way as in step 3 of the section
"Switching On the TV and Automatically Tuning" on page 22.
After selecting the option, press OK and then proceed in the same way as in step 3 of the section
"Switching On the TV and Automatically Tuning" on page 22.
COUNTRY
This option allows you to select the country in which you wish to operate the TV set.
This option allows you to select the country in which you wish to operate the TV set.
To do this:
After selecting the option, press OK and then proceed in the same way as in step 4 of the section
"Switching On the TV and Automatically Tuning" on page 22.
After selecting the option, press OK and then proceed in the same way as in step 4 of the section
"Switching On the TV and Automatically Tuning" on page 22.
AUTO TUNING
This option allows you to automatically search for and store all available TV channels.
This option allows you to automatically search for and store all available TV channels.
To do this:
After selecting the option, press OK and then proceed in the same way as in the steps 5 and 6 of the
section “Switching On the TV and Automatically Tuning” on page 23.
After selecting the option, press OK and then proceed in the same way as in the steps 5 and 6 of the
section “Switching On the TV and Automatically Tuning” on page 23.
PROGRAMME SORTING
This option allows you to change the order in which the channels (TV Broadcast) appear on the
screen.
This option allows you to change the order in which the channels (TV Broadcast) appear on the
screen.
To do this:
After selecting the option, press OK and then proceed in the same way as in the step 7 of the section
“Switching On the TV and Automatically Tuning” on page 23.
After selecting the option, press OK and then proceed in the same way as in the step 7 of the section
“Switching On the TV and Automatically Tuning” on page 23.
,
m
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Select:
Set:
OK
End:
MENU
Personal
80
50
50
50
70
80
50
50
50
70
Auto
Normal
Normal
Language
Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
English
United Kingdom
United Kingdom
Set Up
Select:
Set:
OK
End:
MENU
Set Up
Language
Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
English
United Kingdom
United Kingdom
Select:
Set:
OK
End:
MENU
Back:
–
12
–
WA1
RM-Y1108
PROGRAMME LABELS
This option allows you to name a channel using up to five characters (letters or numbers).
This option allows you to name a channel using up to five characters (letters or numbers).
To do this:
1
Once you have entered the "Set Up" menu as it is explained in the previous page and after selecting this option,
press OK, then press
v
or
V
to select the programme number with the channel you wish to name. Next press OK.
2
With the first element of the Label column highlighted, press OK and
v
,
V
,
B
or
b
to select the letter, next
press OK.
When you have finished, press
v
,
V
,
B
or
b
to select the word “End” on the screen and finally press OK to
turn off the menu from the screen.
To correct a letter, select "
%
" on the screen to go back and press OK.
For a blank, select " " on the screen and press OK.
AV PRESET
This option allows you to:
This option allows you to:
a)
Designate a name to the external equipment you have connected to the input sockets of the TV set.
To do this:
1
Once you have entered the "Set Up" menu as it is explained in the previous page and after selecting this option,
press OK, then press
press OK, then press
v
or
V
to select the input source you wish to name: AV1 for the rear Scart and AV2 for
side connectors. Next press OK twice.
2
A label automatically appears in the label column:
a)
If you want to use one of the predefined labels, press
v
or
V
to select the desired label and finally press OK.
The total predefined labels are: VIDEO, DVD, CABLE, GAME, CAM (camcorder) or SAT
(satellite).
(satellite).
b)
If you want to set a different label, select Edit and press OK. Then, with the first element highlighted, press
v
,
V
,
B
or
b
to select the letter, next press OK. When you have finished, press
v
,
V
,
B
or
b
to select
the word “End” on the screen and finally press OK to turn off the menu from the screen.
To correct the letter, select "
%
" on the screen to go back and press OK.
For a blank, select " " on the screen and press OK.
b)
Change the input sound level of the optional equipment connected.
To do this:
Once you have entered the "Set Up" menu as it is explained in the previous page and after selecting this option
press OK, then press
press OK, then press
v
or
V
to select the input source you want to alter the input sound level: AV1 for the rear
Scart and AV2 for side connectors. Next press twice
b
to highlight the Sound Offset column. Finally press OK
and
v
or
V
to alter the input sound level between -9 and +9.
continued...
The Manual Programme Preset Menu
The “Manual Programme Preset” option in the
"Set Up" menu allows you to manually tune
individual channels.
individual channels.
To do this:
Press the MENU button and press
Press the MENU button and press
v
three times
to select
, then press OK to enter the "Set
Up" menu. Next, press
v
or
V
to select
"Manual Programme Preset" and press OK.
Finally, read below how to operate into each
option.
Finally, read below how to operate into each
option.
The Manual Programme Preset option allows you to:
a)
Preset channels or the VCR channel one by one to the programme order of your choice.
To do this:
1
Once you have entered the “Set Up”menu as it is explained on page 30 and after selecting the "Manual
Programme Preset" option, press OK. Next with Programme option highlighted press OK.
Press
Programme Preset" option, press OK. Next with Programme option highlighted press OK.
Press
v
or
V
to select which programme number you want to preset the channel on (for VCR, select
programme number “0”). Then press
B
.
2
The following option is only available depending on the country you have selected in the “Country”
menu.
menu.
After selecting the System option, press OK. Then press
v
or
V
to select the TV Broadcast system (B/G for
western European countries, D/K for eastern European countries, L for France or I for United Kingdom).
Then press
Then press
B
.
3
After selecting the Channel option, press OK. Next press
v
or
V
to select the channel tuning ("C" for
terrestrial channels or "S" for cable channels). Then press the number buttons to enter directly the channel
number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press
number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press
b
and
v
or
V
to search for it. When you have tuned the desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
b)
Label a channel using up to five characters.
To do this:
Once you have entered the “Set Up”menu as it is explained on page 30 and after selecting the "Manual
Once you have entered the “Set Up”menu as it is explained on page 30 and after selecting the "Manual
Programme Preset" option, press OK. Next with the Programme option, highlighted press the PROG +/- button
to select the programme number with the channel you wish to name. When the programme you want to name
appears on the screen, press
to select the programme number with the channel you wish to name. When the programme you want to name
appears on the screen, press
v
or
V
to select the Label option and press OK. Then, with the first element
highlighted, press
v
,
V
,
B
or
b
to select the letter, next press OK. When you have finished, press
v
,
V
,
B
or
b
to select the word “End” on the screen and finally press OK to turn off the menu from the screen. Finally press
OK
to store.
To correct a letter, select "
%
" on the screen to go back and press OK.
For a blank, select " " on the screen and press OK.
,
m
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Select:
Set:
OK
End:
MENU
Personal
80
50
50
50
70
80
50
50
50
70
Auto
Normal
Normal
Language
Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
English
United Kingdom
United Kingdom
Set Up
Select:
Set:
OK
End:
MENU
Set Up
Language
Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
English
United Kingdom
United Kingdom
Select:
Set:
OK
End:
MENU
Back:
Click on the first or last page to see other KLV-17HR3 service manuals if exist.