Sony KDS-50A2000 / KDS-55A2000 / KDS-60A2000 / KDS-60A2010 Service Manual ▷ View online
HISTORY
When clicking an item, it’s detail is displayed.
Date
SUPP./CORR.
Description of SUP/COR
Change of
main text
2006.6
–
NEW
2006.7
SUPP.-1
Addition of KDS-50A2010 and 60A2010
Yes
2006.8
SUPP.-2
Change of A1 and B1 board.
Yes
2006.9
CORR.-1
Correction of SELF DIAGNOSIS FUNCTION on page
Yes
11 and ELECTRICAL ADJUSTMENT on page 25.
Addition to MISCELLANEOUS on page 145.
Addition to MISCELLANEOUS on page 145.
2007.1
SUPP.-3
Addition of information on Special Component notice.
Yes
2007.5
SUPP.-4
Addition of CONNECTOR ASSY 2P for EXPLODED
Yes
VIEWS and ELECTRICAL PARTS LIST.
Model Name : KDS-50A2000/50A2010/55A2000/60A2000/60A2010
SERVICE MANUAL
Part No.
SERVICE MANUAL
Part No.
: 9-872-789-06
SERVICE MANUAL
MODEL
COMMANDER
DEST. CHASSIS NO.
––––––
–––––––––––– ––––– –––––––––––
MODEL
COMMANDER
DEST. CHASSIS NO.
––––––
–––––––––––– ––––– –––––––––––
CHASSIS
KDS-50A2000
RM-YD010
USA
KDS-50A2000
RM-YD010
CANADA
KDS-50A2010
RM-YD010
MEXICO
KDS-55A2000
RM-YD010
USA
KDS-55A2000
RM-YD010
CANADA
SXRD PROJECTION TV
OPEN
POWER
TIMER
LAMP
POWER
RM-YD010
KDS-50A2000/50A2010/55A2000/60A2000/60A2010
SP-3
KDS-60A2000
RM-YD010
USA
KDS-60A2000
RM-YD010
CANADA
KDS-60A2010
RM-YD010
MEXICO
– 2 –
KDS-50A2000/50A2010/55A2000/60A2000/60A2010
K
RM-YD010 RM-YD010 RM-YD010 RM-YD010 RM-YD010
Specifications
Television system:
NTSC
American TV Standard
ATSC (8VSB terrestrial) ATSC compliant 8VSB
QAM on cable
QAM on cable
ANSI/SCTE 07 2000
(Does not include CableCARD
functionality)
(Does not include CableCARD
functionality)
Channel coverage:
Terrestrial (analog)
2-69
Cable TV (analog)
1-125
Terrestrial (digital)
2-69
Cable TV (digital)
1-135
Antenna:
75-ohm external terminal for VHF/UHF
Screen size (measured diagonally):
KDS-50A2000/KDS-50A2010: 50 inches
KDS-55A2000: 55 inches
KDS-60A2000/KDS-60A2010: 60
KDS-55A2000: 55 inches
KDS-60A2000/KDS-60A2010: 60
inches
Projection system
3 SXRD panel, 1 lens projection system
SXRD panel
0.61 inch SXRD panel 6,220,800 pixels (2,073,600
× 3)
Projection lens
High performance, large diameter hybrid lens F2.5
Lamp
Ultra High Pressure Lamp , 120W, XL-5200
VIDEO IN 1/2/3:
YP
B
P
R
Y: 1.0 Vp-p, 75 ohms unbalanced,
sync negative
P
B
: 0.7 Vp-p, 75 ohms
P
R
: 0.7 Vp-p, 75 ohms
Signal format: 480i, 480p, 720p, 1080i
S VIDEO (4-pin mini DIN) (VIDEO 1 only):
Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO:
1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO:
500 mVrms (100% modulation)
Impedance: 47 kilohms
HD/DVD IN 4/5:
YP
B
P
R
Y: 1.0 Vp-p, 75 ohms unbalanced,
sync negative
P
B
: 0.7 Vp-p, 75 ohms
P
R
: 0.7 Vp-p, 75 ohms
Signal format: 480i, 480p, 720p, 1080i
AUDIO:
500 mVrms (100% modulation)
Impedance: 47 kilohms
HDMI IN 6/7:
HDMI:
Video: 480i, 480p, 720p, 1080i, 1080p
Audio: Two channel linear PCM 32, 44.1 and
Audio: Two channel linear PCM 32, 44.1 and
48 kHz, 16, 20 and 24 bits
AUDIO (for HDMI IN 7):
500 mVrms (100% modulation)
Impedance: 47 kilohms
Impedance: 47 kilohms
AUDIO OUT:
500 mVrms (100% modulation)
More than 1 Vrms at the maximum volume setting (Variable)
50
More than 1 Vrms at the maximum volume setting (Variable)
50
Optical Digital Audio Output (PCM/Dolby digital)
0 mVrms (Fixed)
PC IN 8:
DIGITAL OUT(OPTIVAL):
D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive
See the PC Input Signal Reference Chart on page 61
See the PC Input Signal Reference Chart on page 61
PC AUDIO INPUT:
Stereo mini jack, 0.5 Vrms, 47 kilohm
Speaker:
Full range:
70
× 130 mm (2 × 5 inches) (2)
Speaker output:
12 W + 12 W
Power requirement:
120 V AC, 60 Hz
Power consumption:
In use: 210W
In standby: Less than 0.5W
In standby: Less than 0.5W
Dimensions (W/H/D):
KDS-50A2000/KDS-50A2010: 1180
× 839 × 447 mm
(46
1
/
2
× 33
1
/
8
× 17
5
/
8
inches)
KDS-55A2000: 1292
× 913 × 480 mm
(50
7
/
8
× 36 × 19 inches)
KDS-60A2000/KDS-60A2010: 1413
× 988× 514 mm
(55
3
/
4
× 39 × 20
1
/
4
inches)
Mass:
KDS-50A2000/KDS-50A2010: 34
kg (75 lb.)
KDS-55A2000: 38 kg (83 lb. 13 oz.)
KDS-60A2000/KDS-60A2010: 43
KDS-60A2000/KDS-60A2010: 43
kg (94 lb. 13 oz.)
Supplied accessories:
Remote control RM-YD010 (1)
Size AA batteries (2)
Operating Instructions (1)
Quick Setup Guide (1)
Warranty Card (1) (A2000)
Product Registration Card (1) (A2000)
Size AA batteries (2)
Operating Instructions (1)
Quick Setup Guide (1)
Warranty Card (1) (A2000)
Product Registration Card (1) (A2000)
Design and specifications are subject to change
without notice.
without notice.
(Component Video) (VIDEO 2 only):
(Component Video) :
7
/
8
1
/
8
Optional accessories:
TV Stand: SU-RS11M(KDS-50A2000/KDS-50A2010)
SU-RS11X
(KDS-55A2000/KDS-60A2000/KDS-60A2010)
(KDS-55A2000/KDS-60A2000/KDS-60A2010)
Lamp: XL-5200
– 3 –
KDS-50A2000/50A2010/55A2000/60A2000/60A2010
K
RM-YD010 RM-YD010 RM-YD010 RM-YD010 RM-YD010
Replacing the Lamp
The projection lamp, like all lamps, will eventually lose brightness and
functionality, which affects the overall performance of your TV. How long
the lamp maintains its brightness will vary depending upon your usage and
environmental conditions. To maintain the quality of your viewing
experience, Sony recommends that you replace the lamp (1) after
approximately 8,000 hours of use; (2) when the screen becomes dark or the
color looks unusual; (3) when the LAMP LED on the front of the TV blinks;
or (4) when the lamp replacement message appears on the TV screen.
functionality, which affects the overall performance of your TV. How long
the lamp maintains its brightness will vary depending upon your usage and
environmental conditions. To maintain the quality of your viewing
experience, Sony recommends that you replace the lamp (1) after
approximately 8,000 hours of use; (2) when the screen becomes dark or the
color looks unusual; (3) when the LAMP LED on the front of the TV blinks;
or (4) when the lamp replacement message appears on the TV screen.
•
Use a Sony XL-5200 replacement lamp (not supplied) for replacement.
Use of any other lamp may damage the TV.
Use of any other lamp may damage the TV.
•
Do not remove the lamp for any purpose other than replacement. Doing
so may cause injury or fire.
so may cause injury or fire.
•
Do not put flammable materials and metal objects inside the lamp
receptacle of the TV after removing the lamp. Doing so may cause fire
or electrical shock. Do not touch the lamp receptacle once the lamp has
been removed.
receptacle of the TV after removing the lamp. Doing so may cause fire
or electrical shock. Do not touch the lamp receptacle once the lamp has
been removed.
•
When the lamp eventually burns out, you may hear a noticeable pop
sound. This is normal and it is inherent to this type of lamp.
sound. This is normal and it is inherent to this type of lamp.
•
In rare instances, the bulb may pop inside the lamp unit, but the lamp
unit is designed to contain all of the broken glass pieces inside the lamp
unit.
unit is designed to contain all of the broken glass pieces inside the lamp
unit.
•
This TV’s lamp contains mercury and should be disposed of properly.
Consult your local authorities regarding safe disposal. The material
contained in this lamp are similar to those of a fluorescent lamp, so you
should dispose of it in the same way.
Consult your local authorities regarding safe disposal. The material
contained in this lamp are similar to those of a fluorescent lamp, so you
should dispose of it in the same way.
How to Replace the
Lamp
Lamp
1
Turn off the power on the main unit. Wait several minutes, then unplug
the power cord.
(The cooling fan will continue to operate for about two minutes after
turning the power off.)
the power cord.
(The cooling fan will continue to operate for about two minutes after
turning the power off.)
2
Wait at least 30 minutes after unplugging the power cord to allow the
lamp to cool down before replacing it. To avoid being burned, do not
touch the lamp receptacle once the lamp has been removed.
lamp to cool down before replacing it. To avoid being burned, do not
touch the lamp receptacle once the lamp has been removed.
WARNING
Electric appliances can cause fire or high temperature, resulting in
injury or death. Be sure to follow the instructions below.
injury or death. Be sure to follow the instructions below.
(Continued)