DOWNLOAD Sony KDL-55W950B Service Manual ↓ Size: 5.17 MB | Pages: 31 in PDF or view online for FREE

KDL-55W950B 25

Rear Cover (2)

Neck Stand (4)

 

Main Board (6), LD Board (4) Power Supply Board (5), 
Switch Unit (1)

Wireless Case (1), Speakers (4), Smart Core Block (2), 
Cover Under (1), Rear Cover (3)

SCREW, ORNAMENTAL M6X12

SCREW, +PSW M3X8

SCREW, +PSW M3X6 W12

SCREW (+PSW) (M3X6)

SCREW, +BVTP 4X12 TYPE2 IT-3

2-580-608-01

2-580-593-01

4-256-393-01

2-990-421-41

2-580-639-01

Rear Cover (14), Tuner Board (4), AC Bracket (1), 
Main Board Plate (8)

Bracket SP (4), Panel Ornamental (8), Boss SP (8), 
Bracket RC (6)

SCREW, +PSW M5X16

4-268-126-02

Rear Cover (2)

SCREW, ORNAMENTAL M5X12

4-488-253-01

NA

NA

4-159-298-01

SCREW, +PSW M4X10 

AC Cover (1), Bracket Stand (12), Bracket Vesa (4),
Cam (1) 

Bracket Stand In (4), Bracket Stand Out (4)

SCREW, +PSW M4X8

2-580-600-01

2-580-599-01

SCREW, +PSW M4X6

Bracket Stand In (2), Bracket Stand Out (2)

KDL-55W950B 26

 

 

2-580-608-01 

SCREW, +PSW M5X16

 

 

 

(SCREWS TO ATTACH TABLE TOP STAND TO LCD TV)  

  

 

For product protection and safety reasons, Sony strongly recommends 

 

 

 

that you use the screws provided with the TV.  

 

 

 

CAUTION: These screws cannot be used to secure the TV  

 

 

 

to the Wall Mount Brackets.

 

 

4-478-082-01 

ATTACHMENT, WALL MOUNT

 

 

4-531-417-11 

MANUAL, INSTRUCTION

 

 

1-845-283-11 

IR BLASTER

 

 

NA 

PASSIVE 3D GLASSES (4 PACK)

 

 

 

(NOT AVAILABLE FOR SERVICE)

 

 

X-2586-996-1 

PASSIVE 3D GLASSES (SINGLE KIT)

 

 

 

(AVAILABLE FOR SERVICE)

 

 

4-273-074-14 

FLYER, SAFETY

 

 

4-476-778-01 

SHEET INSULATION

 

 

4-256-454-02 

SPACER (G A)

 

 

7-600-031-97 

TAPE (3M 1350FB-1) 15MMX66M BLK

 

 

7-600-031-96 

TAPE (3M 1350FW-1) 15MMX66M WHT

 

 

3-674-673-22  

STOPPER (A)

 

 

4-414-470-01 

SUPPORT BELT KIT

 

 

1-492-766-11 

REMOTE COMMANDER (RM-YD099)

 

 

1-492-758-11 

ONE TOUCH REMOTE COMMANDER (RMF-YD003)

KDL-55W950B A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5. 

If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.

b. 

and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6. 

If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED. 

KDL-55W950B A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5. 

If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.

b. 

and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6. 

If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED.