Sony KDL-55HX950 / KDL-65HX950 Service Manual ▷ View online
KDL-55/65HX950(CH)
9
When replacing the TENGO panel at service, please note the followings.
- Unpack the package of TENGO panel. (Fig.5)
- Cut protection bag at the center of the back of panel. (Fig.6)
* Please cut the protection bag carefully, the bag will be used for re-packing.
WARNINGS AND CAUTIONS
Fig.6
Fig.5
KDL-55/65HX950(CH)
10
When replacing the TENGO panel at service, please note the followings.
- Assemble TV set with the new panel. (Fig.7)
- After assembly, attach Stand Unit and stand the TV up. (Fig.8)
WARNINGS AND CAUTIONS
Fig.7
Fig.8
KDL-55/65HX950(CH)
11
When replacing the TENGO panel at service, please note the followings.
- Set the plastic bag on correct position of package and place the replaced panel on it. (Fig.9)
* Handle the panel carefully as the instruction below.
- Align the bottom side of panel with cushions on the package. (Fig.10)
* Please note that it may damage to the glass surface if you pack panel in the wrong orientation.
* Please handle with care to prevent hitting the glass of panel to package materials.
More than 200mm from the short side
WARNINGS AND CAUTIONS
Fig.10
Fig.9
KDL-55/65HX950(CH)
12
When replacing the TENGO panel at service, please note the followings.
- Tape the plastic bag on the back of panel to protect panel surface. (Fig.11)
* Please make sure the orientation of the panel again. (T-CON board side is lower.)
- Repack the panel in the original carton box.
Fig.11
Fig.12
WARNINGS AND CAUTIONS
Click on the first or last page to see other KDL-55HX950 / KDL-65HX950 service manuals if exist.