Sony KDL-55EX505 / KDL-60EX505 Service Manual ▷ View online
KDL-55EX505/60EX505
20
SERVICE ADJUSTMENTS
2-1-2. USING THE REMOTE COMMANDER TO VIEW OR
CHANGE SERVICE DATA
Use the buttons on the Remote Commander to access the Service
Menu items and adjust the Data Values.
4. To change the Category,
press
2
to move to the Next Category or
press
5
to go back to the Previous Category.
Note: Pressing
2
or
5
only changes the Categories within
the Service Menu displayed.
5. To change the adjustment item,
press
1
to move to the Next Item or
4
to go back to the Previous Item.
6. To change the Data Value,
press
3
to increase the Data Value or
6
to decrease the Data Value.
7. Press
MUTING then press
0
to Write the changes.
8. To exit service mode, press HOME or turn the TV power off.
2-2. ADJUSTMENTS AFTER REPLACING THE BAL BOARD
The following procedures must be completed after replacing the BAL
Board or the LCD panel.
Update the TV to the latest software version
Select the Model
Select the Destination
Verify model and panel information are correct
Reconnect all cables
2-2-1. UPDATING THE SOFTWARE
After replacing the BAL Board or the LCD Panel, you must update the
software to the latest version.
Before you begin
Disconnect all cables (RF, External input, Ethernet, etc.) from
the TV
Instructions for updating the software are included with the software
package. After completing the software update, proceed to “Selecting the
Model”.
KDL-55EX505/60EX505
21
SERVICE ADJUSTMENTS
2-2-2. SELECTING THE MODEL
After replacing the BAL Board or LCD Panel, go into Service Mode to set
the Model data value.
1. TV must be in Standby Mode. (POWER off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010 W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
---.---------
ID25C73683
PID506A0000
PID506A0000
LTY550HJ01
4. Press
2
to move to the 002 MODEL (Next) category.
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
01 : 2a-3
5. Using the table, press
3
to increase the data value or
6
to decrease the data value, to match the model of the TV.
Chassis
Model Name
䎧䏄䏗䏄䎃
䎹䏄䏏䏘䏈
䎦䏒䏇䏈䎃
䎱䏄䏐䏈
AZ1-L
KDL-55EX505
13
3a-1
AZ1-L
KDL-60EX505
13
3a-1
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
13: 3a-1
Data Value
Code Name
6. Proceed to “Selecting the Destination”.
KDL-55EX505/60EX505
22
SERVICE ADJUSTMENTS
2-2-3. SELECTING THE DESTINATION
After replacing the BAL Board or the LCD Panel, the destination location
must be set.
CAUTION: Selecting the incorrect destination may requiring replacing the
BAL Board.
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
13 : 3a-1
7. Press
1
to move to “001 DEST” sub Category.
DIGITAL
SERVICE
002 MODEL
001 DEST
001 DEST
03: UC (UC grp)
8. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the destination of the
TV.
GROUP
DESTINATION
DATA
VALUE
BR
13
AR
20
BR grp
DIGITAL
SERVICE
002 MODEL
001 DEST
001 DEST
20: AR (BR grp)
Data Value
Destination
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a BAL Board replacement.
9. After verifying the correct destination data value displays,
press
0
to save (Write) the changes.
10. Exit Service Mode by pressing HOME or turn the TV power
off.
11. Proceed to “Verifying the Model and Panel Information”.
KDL-55EX505/60EX505
23
SERVICE ADJUSTMENTS
2-2-4. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in Standby Mode. (POWER off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
Model ID
Product ID
Panel
Code
Code
ID25C73683
PID506A0000
LTY550HJ01
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model Name Model ID
ProduCt ID
Panel ID
Code
Name
KDL-55EX505
25C73683
506A0000
LTY(Z)550HJ01
3a-1
KDL-55EX505
25C73683
506A0000
LTY(Z)550HJ01
3a-1
KDL-60EX505
25C7368A
506A0000
LK600D3LA1S
3a-1
KDL-60EX505
25C7368A
506A0000
LK600D3LA3S
3a-1
KDL-60EX505
25C7368A
506A0000
LK600D3LA1S
3a-1
KDL-60EX505
25C7368A
506A0000
LK600D3LA3S
3a-1
5. Exit Service Mode by pressing HOME or turn the TV power
off.
6. Proceed to “Reconnecting All Cables”.
2-2-5. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
If necessary, proceed to “White Balance Adjustments”.
Click on the first or last page to see other KDL-55EX505 / KDL-60EX505 service manuals if exist.