Sony KDL-50W800B Service Manual ▷ View online
KDL-50W800B 1
SPECIFICATIONS
System
Television system
NTSC: American TV standard
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
Panel system
Speaker output
Wireless technology
Speaker output
Wireless technology
Input/Output jacks
CABLE/ANTENNA
VIDEO IN 1
COMPONENT IN
COMPONENT IN
VIDEO IN 2
YP
B
P
R
: (Component Video): 1080p (60 Hz), 1080i (60 Hz), 720p (60 Hz), 480p, 480i
Audio input (phono jacks)
Video input (common phono pin with Y input)
Video input (common phono pin with Y input)
HDMI IN 1/2/3/4
Video (2D): 1080p (30, 60 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p,
480p, 480i, PC Formats
Video (3D):
Frame Packing: 1080p (30 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p
Side-by-Side: 1080p (60 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz)
Over-Under: 1080p (30, 60 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz)
Audio: 5.1 channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
ARC (Audio Return Channel) (HDMI IN 2 only)
MHL
(Common with HDMI IN 1)
Video (2D): 1080p (30 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p,
480p, 480i
Video (3D):
Side-by-Side: 1080/24p, 1080i (60 Hz), 720p (60 Hz)
Over-Under: 1080p (30 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz)
Audio: 5.1 channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Side-by-Side: 1080/24p, 1080i (60 Hz), 720p (60 Hz)
Over-Under: 1080p (30 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz)
Audio: 5.1 channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
AUDIO OUT/ i
Audio output (stereo mini jack)
Headphone jack
(supports Subwoofer out)
Headphone jack
(supports Subwoofer out)
DIGITAL AUDIO OUT
(OPTICAL)
(OPTICAL)
Digital optical jack (Two channel linear PCM, Dolby Digital)
N
A
L
USB / DLNA
Refer to the i-Manual for supported formats
AC adapter input (DC 19.5 V)
Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69
LCD (Liquid Crystal Display) Panel, LED Backlight
8 W + 8 W
Protocol IEEE802.11a/b/g/n
8 W + 8 W
Protocol IEEE802.11a/b/g/n
75-ohm external terminal for RF inputs
Video / Audio input (phono jacks)
Video / Audio input (phono jacks)
10BASE-T/100BASE-TX connector (Connection speed may differ depending on the
network environment. 10BASE-T/100BASE-TX communication rate and
communication quality are not guatanteed for this TV)
SECTION 1 - SPECIFICATIONS AND LAYOUTS
* Screen size, dimensions and mass are approximate values.
•
Optional accessories availability depends on countries/region/TV model/stock.
•
Design and specifications are subject to change without notice.
•
This TV set incorporates MHL 2.
Others
Optional accessories
One-touch Remote Control: RMF-YD001
Touchpad Remote Control: RMF-YD003
Wireless Subwoofer: SWF-BR100
MHL Cable: DLC-MB10/DLC-MB20/DLC-MC20
Active 3D Glasses: TDG-BT500A
Touchpad Remote Control: RMF-YD003
Wireless Subwoofer: SWF-BR100
MHL Cable: DLC-MB10/DLC-MB20/DLC-MC20
Active 3D Glasses: TDG-BT500A
Operating temperature
Model name
KDL-50W800B
Power and others
Power requirement
Rating: Input 110-240 V AC, 50/60 Hz (USA/Canada 120 V AC, 60 Hz)
Power
consumption
consumption
W
9
8
in standby
Screen size*
(inches measured diagonally)
49.5 inches
(50 class)
Display resolution
Dimensions
* with stand
(inches)
1116 × 693 × 179
44 × 27
3
/
8
× 7
1
/
8
without stand
(mm)
(inches)
1116 × 656 × 64
44 × 25
7
/
8
× 2
5
/
8
wall-mount hole
pattern
291
wall-mount screw
size
M6 (7 mm)
Mass*
with stand
(kg)/(lb)
14,8 / 32,6
without stand
(kg)/(lb)
13,6 / 30,0
19,5 V DC with AC adapter
Less than 0.4 W with 120 V AC and less than 0.5 W with 240 V AC
1,920 dots (horizontal) × 1,080 lines (vertical)
(mm)
(mm)
Camera and Microphone Unit: CMU-BR200/CMU-BR100
32 ºF – 104 ºF (0 ºC – 40 ºC)
in use
(mm)
CHECKING THE ACCESSORIES
Remote Control (1) *
1
Size AAA Batteries (2)
AC Adapter (1)
Table-Top Stand (1) *
2
Active 3D Glasses (battery included) (2)
*1 Please refer to the model name printed on the
remote control.
*2 Assembling the Table-Top Stand is required.
Refer to the supplied Table-Top Stand leaflet to
assemble the Table-Top Stand.
assemble the Table-Top Stand.
AC Power Cord (1)
Cable Holder (1)
Fixing screws for Table-Top Stand
(M5 × 16) (2)
(M5 × 16) (2)
Assembling screws for Table-Top Stand
(M5 × 16) (2)
Operating Instructions, other documents
and Wall-Mount Bracket accessories
and Wall-Mount Bracket accessories
KDL-50W800B 2
SECTION 1 - SPECIFICATIONS AND LAYOUTS
BOARD LAYOUT
KDL-50W800B
HSC2 BOARD
WIRELESS
LAN CARD
BT MODULE
SMART CORE BLOCK
SWITCH
UNIT
MAIN BOARD
(BAX BOARD)
LD BOARD
SMART CORE
TUNER BOARD
(TUS BOARD)
KDL-50W800B 3
SECTION 1 - SPECIFICATIONS AND LAYOUTS
WIRE DRESSING
KDL-50W800B
SMART CORE BLOCK
KDL-50W800B 4
DIAGNOSING THE ERROR
Before servicing the Television:
1. Verify the TV has the symptom the customer indicated.
2. Check to see if the latest Software is installed.
a. If not, install the latest version.
3. Determine the replacement part required.
VIEWING THE SELF CHECK DIAGNOSIS HISTORY
When an error is detected, the Self Check screen records the number of
times the error occurred. This is helpful in confirming past occurrences of
an error and for determining if an error is intermittent when the customer is
not sure what is causing the television to shut down. If the screen displays
a “0”, no error has occurred.
an error and for determining if an error is intermittent when the customer is
not sure what is causing the television to shut down. If the screen displays
a “0”, no error has occurred.
1. Press Power
I/0
to turn on the TV and then turn it off again.
2. Press the following buttons on the
Remote Commander within 1
second of each other:
DISPLAY
Channel
5
Volume
-
Power
I/0
NOTE:
This differs from accessing Service Adjustments Mode (Volume +).
SECTION 2 - TROUBLESHOOTING
Self Diagnosis
Supported model
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD
--------------------- --------------------- --------------------- 00
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
120123132522 120123113645 --------------------- 02
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- --------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT
--------------------- --------------------- --------------------- 00
103 HOST_WDT
--------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 06789
Total operation time by hour (MAX:65535)
Boot count (MAX:65535)
Panel operation time by hour (MAX:65535)
Total operation time by hour (MAX:65535)
Boot count (MAX:65535)
Panel operation time by hour (MAX:65535)
StandBy LED
Blink Count
Diagnosis
Item
Date and Time Display*
Error Count
(00-99)
*Format of Error History = YYMMDDhhmmss example 120123132522= Jan 23, 2012 13:25:22 (1:25:22PM)
NOTE: date and time must be set for this to work
SAMPLE SELF CHECK DIAGNOSIS PAGE
Click on the first or last page to see other KDL-50W800B service manuals if exist.