Sony KDL-50R550A / KDL-60R520A / KDL-60R550A / KDL-70R550A Service Manual ▷ View online
KDL-50R550A/60R520A/60R550A/70R550A 17
SECTION 3 - REPAIR INFORMATION
6. Reconnect the LVDS, FFC cables, and all other connectors.
CAUTION: Make sure the black line is aligned to the connector before
locking.
locking.
a. Insert LVDS cable in the connector and close black locking bar to
secure position.
b. Holding the FFC cables, insert into the connector and close black
locking bar to secure position.
7. Update the Software.
After ALL repairs UPDATE the SOFTWARE to the latest version.
Instructions are included with the Software package on the
Instructions are included with the Software package on the
Sony
Authorized Service Portal
website.
a. Press
POWER
to turn on the TV.
b. Insert the USB device with the latest Software into the TV.
c. Press
HOME
to display the menu options.
d. Press
to select
Settings, then press
.
e. Press
/
to select
Setup.
f. Press
/
to select
Software Update, then press
.
g. Press
/
to select
USB, then press
.
h. During the Software update, the TV automatically restarts.
i. Series of different messages will appear on the TV set.
Please follow the on screen instructions.
NOTE:
An information LED may be flashing on the front bottom
of the TV.
j. After several minutes the TV may automatically restart again to
complete the update.
CAUTION: DO NOT TURN OFF THE TV OR UNPLUG THE
POWER CORD WHILE THE UPDATE IS IN PROGRESS.
k. Remove the USB device from the TV.
KDL-50R550A/60R520A/60R550A/70R550A 18
SECTION 3 - REPAIR INFORMATION
8. Access
Service Mode by pressing the following buttons within 1 second
of each other:
DISPLAY
Channel
5
Volume
+
POWER
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
30
]>
Low of HPD
<[
5
]>
TVD_MCDONE_CNT
<[
20
]>
Demo Special
>>
Bypass AVI Info Detect
<[
On
]>
Panel Selection
<[
31_JE695D3LB4N_US
]>
UART Selection
No Log
SERIAL NUMBER EDIT
MODEL NAME EDIT
[</>]Set [Home] Exit
Service Mode
9. Press
until
Panel Selection is selected.
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
30
]>
Low of HPD
<[
5
]>
TVD_MCDONE_CNT
<[
20
]>
Demo Special
>>
Bypass AVI Info Detect
<[
On
]>
Panel Selection
<[
31_JE695D3LB4N_US
]>
UART Selection
No Log
SERIAL NUMBER EDIT
MODEL NAME EDIT
[</>]Set [Home] Exit
Service Mode
10. Press
or
to select the correct Panel Code for the TV model.
(Use the table below for reference).
Model Name
Panel Code
KDL-50R550A
41_LC500EUD_US
KDL-60R520A
46_JE600D3LC7N_US
KDL-60R550A
36_JE600D3LC5N_US
KDL-70R550A
31_JE695D3LB4N_US
CAUTION: Select ONLY the correct Panel Code.
11. Locate the Serial Number for the TV on the side of the Rear Cover.
MODEL NO
KDL-70R550A
SERIAL NO
6000001
12. Press
until
SERIAL NUMBER EDIT is selected.
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
30
]>
Low of HPD
<[
5
]>
TVD_MCDONE_CNT
<[
20
]>
Demo Special
>>
Bypass AVI Info Detect
<[
On
]>
Panel Selection
<[
31_JE695D3LB4N_US
]>
UART Selection
No Log
SERIAL NUMBER EDIT
MODEL NAME EDIT
[</>]Set [Home] Exit
Service Mode
KDL-50R550A/60R520A/60R550A/70R550A 19
SECTION 3 - REPAIR INFORMATION
13. Press
to be able to select the first digit.
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
30
]>
Low of HPD
<[
5
]>
TVD_MCDONE_CNT
<[
20
]>
Demo Special
>>
Bypass AVI Info Detect
<[
On
]>
Panel Selection
<[
31_JE695D3LB4N_US
]>
UART Selection
No Log
SERIAL NUMBER EDIT
_ _ _ _ _ _ _
MODEL NAME EDIT
[</>]Set [Home] Exit
Service Mode
14. Press
or
to select numbers and then
to move to the next
digit until Serial Number is complete.
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
30
]>
Low of HPD
<[
5
]>
TVD_MCDONE_CNT
<[
20
]>
Demo Special
>>
Bypass AVI Info Detect
<[
On
]>
Panel Selection
<[
31_JE695D3LB4N_US
]>
UART Selection
No Log
SERIAL NUMBER EDIT
6000001
MODEL NAME EDIT
[</>]Set [Home] Exit
Service Mode
CAUTION: The Serial Number can only be selected once. Be sure
to verify the information is correct before saving the changes.
to verify the information is correct before saving the changes.
15. When the complete Serial Number displays, press
.
16.
On the confirmation screen, press to select
YES and then
.
Input Data Correct?
Yes
No
Properly selected text is in black
17. Press
until
MODEL NAME EDIT is selected.
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
30
]>
Low of HPD
<[
5
]>
TVD_MCDONE_CNT
<[
20
]>
Demo Special
>>
Bypass AVI Info Detect
<[
On
]>
Panel Selection
<[
31_JE695D3LB4N_US
]>
UART Selection
No Log
SERIAL NUMBER EDIT
6000001
MODEL NAME EDIT
[</>]Set [Home] Exit
Service Mode
KDL-50R550A/60R520A/60R550A/70R550A 20
SECTION 3 - REPAIR INFORMATION
18. Press
to be able to select the first character.
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
30
]>
Low of HPD
<[
5
]>
TVD_MCDONE_CNT
<[
20
]>
Demo Special
>>
Bypass AVI Info Detect
<[
On
]>
Panel Selection
<[
31_JE695D3LB4N_US
]>
UART Selection
No Log
SERIAL NUMBER EDIT
6000001
MODEL NAME EDIT
_ _ _ _ _ _ _ _ _ _ _
[</>]Set [Home] Exit
Service Mode
19. Press
or
to select characters and then
to move to the next
space until Model Name is complete.
NOTE
: Make sure to include dash in Model Name.
Sound Adjustment
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
30
]>
Low of HPD
<[
5
]>
TVD_MCDONE_CNT
<[
20
]>
Demo Special
>>
Bypass AVI Info Detect
<[
On
]>
Panel Selection
<[
31_JE695D3LB4N_US
]>
UART Selection
No Log
SERIAL NUMBER EDIT
6000001
MODEL NAME EDIT
KDL-70R550A
[</>]Set [Home] Exit
Service Mode
CAUTION: The Model Name can only be selected once. Be sure
to verify the information is correct before saving the changes.
to verify the information is correct before saving the changes.
20. When the complete Model Name displays, press
.
21.
On the confirmation screen, press to select
YES and then
.
Input Data Correct?
Yes
No
Properly selected text is in black
22. Press
POWER
to exit
Service Mode.
REPLACING THE POWER SUPPLY BOARD
1. Disconnect all connectors from Power Supply Board.
2. Remove 6 screws to detach from the Rear Cover.
3. Install the new Power Supply Board, screws and connectors.
Click on the first or last page to see other KDL-50R550A / KDL-60R520A / KDL-60R550A / KDL-70R550A service manuals if exist.